Ricoh D177 Manual

Met-C1yz Training

Slide 1 Version 1.0

D176/D177

Service Training

Met-C1yz

This course explains the new additions to the Met-C1 series of middle-to-high

range color MFPs. These new models are successors to the Di-C1.5-series.

The course explains differences from the Met-C1ab, and compares the

specifications with those of the Di-C1.5.

Met-C1yz Training

Slide 2

Appearance

ADF

Internal Finisher

Two-tray

Paper Tray Unit

Customers can install a simple ADF. It is the same as the K-C4.

Met-C1yz Training

Slide 3

D176/D177

Service Training

Product Overview

This section provides an overview of the machine, and the options that can be

installed.

Met-C1yz Training

Slide 4

What Models are there in the Series?

Comparing Basic Specifications

Met-C1y (D176)

20 cpm (b/w, color)

Met-C1z (D177)

25 cpm (b/w, color)

No additional notes

Met-C1yz Training

Slide 5

What Models are there in the Series?

Regional Variations in Standard Models

1 model

ARDF is option;

Smart Operation

Panel is option

1 model

ARDF is option;

Smart Operation

Panel is option

2 models

1) ARDF, normal operation panel

(The Smart operation panel is not

available as an option)

2) ARDF, Smart operation panel

1 model

ARDF is standard;

Smart Operation

Panel is option

C1z

1 model

ARDF is option;

Smart Operation

Panel is option

1 model

ARDF is option;

Smart Operation

Panel is option

2 models

1) ARDF, normal operation panel

(The Smart operation panel is not

available as an option)

2) ARDF, Smart operation panel

1 model

ARDF is standard;

Smart Operation

Panel is option

C1y

RCNRARERAC

No additional notes

Met-C1yz Training

Slide 6

Product Positioning

Met-C1a/b: Successors to

the Di-C1.5 and Di-C1L

series

Mid.-

low

AT-C3b

(35/35)

(30/30)

AT-C3a Met-C1a

Met-C1b

(30/30)

(35/35)

(CPM)

low

(25/25)

Di-C1Lc/

C1.5c Met-C1z

(25/25)

(20/20)

Di-C1La/

C1.5a Met-C1y

(20/20)

No additional notes

Met-C1yz Training

Slide 7

Comparing Specifications

Met-C1y/z - 1

25202520Print/Copy Speed (FC, ppm)

320 x 600 mm, 12.6” x 18”305 x 600 mm, 12” x 18”Max Output Size (Bypass)

320 x 457 mm, 12.6” x 18”297 x 420 mm, 11” x 17”Max Output Size (Trays)

600 dpi600 dpiCopy Resolution, dpi

600 dpi600 dpiScan Resolution, dpi

1200 x 1200, 2-bit1200 x 1200Print resolution, dpi

5.610Recovery from Sleep Mode (Full

System, seconds)

1930Warm-up Time (seconds)

7.79.51st Copy Time (FC, seconds)

5.56.51st Copy Time (B/W, seconds)

25202520Print/Copy Speed (B/W, ppm)

81100Weight (kg)

587 x 677 x 760, w/o ADF587 x 676 x 724 , w/o ADFSize (WxDxH, mm)

zyca

Met-C1Di-C1.5

No additional notes

Met-C1yz Training

Slide 8

Comparing Specifications

Met-C1y/z - 2

55 lpm (200 dpi, 300 dpi)47 lpm (200 dpi)Scanning Speed (B/W, FC)

250160Hard Disk (GB)

1.5 (Max 2.0)1.5Memory (GB)

550 x 2 + 100 = 1200300 x 2 + 100 = 700Paper Feed Capacity (Standard)

550 x 4 + 100 = 2300500 x 2 + 300 x 2 + 100 =

1700

Paper Feed Capacity (Maximum)

52 - 30060 - 256Paper Weight (Bypass, gsm)

US: 1.584

EU: 1.7

US: 1.6

EU: 1.68

Max Power Consumption (kW)

0.860.71US: 1.30

EU: 1.20

US: 1.00

EU: 1.00

TEC Value (kWh)

52 - 16960 - 105Paper Weight (Duplex, gsm)

60 - 30060 - 256Paper Weight (Trays, gsm)

zyca

Met-C1Di-C1.5

Memory: To upgrade the memory to 2 GB, the 1.5 GB memory is removed and a

2 GB option is installed.

Met-C1yz Training

Slide 9

Differences from Other Models in the Series

No SP valueNo SP valueCorrection SP value must

be input when this board

is replaced

HVP-CB (high

voltage supply

board)

IPU is compatible with SPDF,

but an additional board (IPU

sub board) is mounted on

SPDF models, and must be

installed when an optional

SPDF is installed.

IPU is not compatible with SPDF

No SPDF option, so the

issues with the IPU do

not apply

IPU

Tray pull-in mechanismTray pull-in mechanism- Locked tray (At/Ap-C3)

- No pick up solenoid

- No Paper Feed sensor

(Main frame only)

Paper tray

8 fans

LD 1 beam

Met-C1a/b Met-C1c/d/eMet-C1y/z

11 fans7 fansAir flow

Only Met-C1eNoDouble feed

detection

Only Met-C1eNoBypass: Side

fence contact

sensor

mechanism

LD 4 beamsLD 1 beamLaser diode unit

No additional notes

Met-C1yz Training

Slide 10

Differences from Other Models in the Series

- AC charge roller (No contact

type)

- Lubricant bar

- 4-layer drum

- No discharge lamp

-AC charge roller (No contact

type)

- Lubricant bar

- 4-layer drum

- No discharge lamp

-DC charge roller

(Contact type)

- No lubricant bar

- 3-layer drum

- Discharge lamp is in the

mainframe

- Correction SP value

must be input when PCU

is replaced

PCU

Two mixing augers, one way circulation (see diagram below)

Met-C1a/b Met-C1c/d/eMet-C1y/z

Two mixing augers, two-

way circulation (see

diagram below)

Development unit

Met-C1yz Met-C1abcde

No additional notes

This manual suits for next models

Table of contents

Other Ricoh All In One Printer manuals

Popular All In One Printer manuals by other brands

Triumph Adler

Triumph Adler DC 2016 Instruction handbook

Epson

Epson WorkForce WF-2510 Basic guide

Epson

Epson Stylus Scan 2000 Product information guide

Epson

Epson PictureMate Snap PM 240 Start here

Konica Minolta

Konica Minolta bizhub C35 user guide

Brother

Brother MFC-J430w user guide

Konica Minolta

Konica Minolta BIZHUB 558 Quick reference guide

Lexmark

Lexmark MX710 Series setup sheet

Brother

Brother MFC-9760 owner's manual

Lexmark

Lexmark XC8155 user guide

Lexmark

Lexmark X642E Service manual

Sharp

Sharp MX-2310U Start guide

Aficio

Aficio 200 manual

Canon

Canon ImageCLASS 2300 setup sheet

Lexmark

Lexmark X925 Installation

Brother

Brother Business Smart MFC-J4510dw manual

Epson

Epson Stylus CX8400 Series Brochure & specs

Oce

Oce VarioLink 5022 user guide