Quooker PRO3 User manual
Installation guide PRO3
Read this guide rst before installing
Introduction
The operation of the Quooker PRO3
The Quooker system consists of a vacuum-insulated tank, which is connected to the cold water
supply under the sink and to the Nordic single tap, the Fusion tap or the Flex tap. Both boiling
water and mixer water can be dispensed from the Fusion and Flex tap.
Inside the tank the water is heated electrically to approx. 108°C and is kept at this temperature.
The Quooker PRO3 has a capacity of 3 litres. Before water is dispensed, it is puried by
the HiTAC® water lter.
The Nordic single tap, the Fusion tap and the Flex tap are tted with a childproof push-and-turn
handle, which is clearly recognisable by its textured ring. The Nordic single tap is height adjustable
to guarantee safe use. Both the Nordic single tap, the Fusion tap and the Flex tap
are well insulated.
Despite all the safety features incorporated in the product, anyone using the Quooker system
must keep in mind the risks of using boiling water in general. Incorrect use can lead to injury.
Therefore, always read the manual carefully before use.
Installation, maintenance and warranty
Installing the Quooker requires connections to the mains water supply and the electrical system.
The Quooker is supplied with a handy connection kit (including the required Quooker inlet valve)
for simple installation. For optimally puried Quooker boiling water, we recommend changing the
HiTAC® lter cartridge every 3 - 5 years. If necessary, the tank can be descaled. In areas with hard
water this should be performed more regularly.
You must not connect the Quooker to a reverse osmosis system or to a water softener that
reduces the pH value.
The warranty period is two years, according to our General Terms of Business.
Users
The Quooker tap can be used by children above the age of eight and people with diminished
physical, sensory or intellectual abilities provided they are supervised or have been instructed
on the safe use of the device. Inform people who are unfamiliar with the Quooker system about
safe use and the possible dangers associated with the use of the boiling-water tap. Please note:
incorrect use may result in injury. Prevent children from using the tap as a toy and do not
allow children to clean or maintain the product unsupervised. Keep the plug out of reach
of small children.
The Quooker system is suitable for household use and commercial use such as in sta kitchens
at shops, oces, farms and other business premises and for use by visitors at hotels, motels,
bed & breakfasts and other residential accommodation.
Always follow the installation method described in the manual. Avoid spilling water on the plug.
If defective, the power plug may only be replaced by a qualied technician. Make sure you let
the tank cool o adequately before disconnecting it. The fastest way to do this is as follows: turn
o the Quooker, but leave the plug in the socket. Then open the boiling-water tap and turn it o
once the water runs cold. You can nd a more detailed explanation for disconnecting the tank
in chapter E.
Tips for use and the installation manual can also be found on our website: quooker.uk
Declaration of conformity
Quooker Nederland B.V., Staalstraat 13, 2984 AJ Ridderkerk (The Netherlands) herewith declares,
on our own responsibility, that the product Quooker PRO3 is in accordance with the conditions
of the following directives:
- 2014/35/EU Low Voltage Directive (LVD)
- 2011/65/EU Restriction of Hazardous Substances (RoHS) Directive
- 2014/30/EU Electromagnetic Compatibility Directive (EMCD)
- 2009/125/EC Ecodesign energy-related products Directive
- 2014/68/EU Pressure Equipment Directive
and complies with the following standards:
General product safety household and similar electrical appliances
EN 60335-1:2012 + AC:2014 + A11:2014
EN 60335-2-15:2002 + AC:2005 + A1:2005 + AC:2006 + A2:2008 + A11:2012 + A11:2012/AC:2013
+ EN 60335-2-15:2016
EN 60335-2-21:2003 + A1:2005 + AC:2007 + A2:2008 + AC:2010
Public exposure to electromagnetic elds (EMF)
EN 62233:2008 + AC:2008
Electromagnetic compatibility (EMC)
EN 55014-1:2017 + EN 55014-1:2006 + A1:2009 + A2:2011
EN 55014-2:2015 + EN 55014-2:1997 + AC:1997 + A1:2001 + A2:2008
EN 61000-3-2:2014
EN 61000-3-3:2013
Restriction of hazardous substances
EN 50581:2012
The Netherlands, Ridderkerk, June 2021
Niels Peteri, Director
Technical specications
Tank PRO3
Voltage 230 V
Wattage 1600 W
Capacity 3 litres
Heating-up time* 10 minutes
Standby power consumption 10 W
Tank height 46,7 cm
Total tank height requirement 54,7 cm
Tank diameter 15,3 cm
Min. mains pressure 200 kPa (2 bar)
Max. mains pressure 600 kPa (6 bar)
Max. working pressure 800 kPa (8 bar)
Mounting bracket optional yes
Safety features - maximum temperature fuse
- 800 kPa (8 Bar) overpressure protection,
intergrated into solenoid valve
Water shut-o valve electric
HiTAC® water lter High Temperature Activated Carbon
*These are average values.
Tap Nordic Fusion, Flex
single tap and mixer tap
Tap hole size 32 mm 35 mm
Recomm. temp. mixing water - 60°C
Tap base ring available yes yes
1
Contents of the pack
1. - Nordic single tap, small bre washer, centring ring, metal washer, threaded ring and two screws
- or Fusion tap, hoses, small bre washer, brass xing plate, xing nut, white tap support
(for thin work tops) and two inlet hose screens
- or Flex tap, hoses, small bre washer, metal washer, threaded ring with two screws,
counterweight with boiling water hose, white tap support (for thin work tops),
two inlet hose screens and quick-release tool.
Fusion
Flex
Nordic single tap
2
4
3
5
2. PRO3 tank
3. Inlet reducing valve with bre washer
4. Isolation valve with lter and bre washer
5. Inlet couplings and bre washers
Hot
Cold
A
C
D
B1
Overview of Nordic single tap installation
It is recommended that you install the Quooker in the following order:
A. Drilling hole
B1. Fitting Nordic single tap
C. Connecting water
D. Connecting tank to tap
E. Disconnecting tank
Note: Bear in mind that the tank, inlet valve and socket must remain easily accessible for servicing.
For an overview of the Fusion tap installation, please refer to the next page and for the Flex tap
to the page after that.
Overview of Fusion tap installation
It is recommended that you install the Quooker in the following order:
A. Drilling hole
B2. Fitting Fusion tap
C. Connecting water
D. Connecting tank to tap
E. Disconnecting tank
Note: Bear in mind that the tank, inlet valve and socket must remain easily accessible for servicing.
For an overview of the Flex tap installation, please refer to the next page.
Hot
Cold
A
C
D
B2
Overview of Flex tap installation
It is recommended that you install the Quooker in the following order:
A. Drilling hole
B3. Fitting Flex tap
C. Connecting water
D. Connecting tank to tap
E. Disconnecting tank
Note: Bear in mind that the tank, inlet valve and socket must remain easily accessible for servicing.
Hot
Cold
C
A
D
B3
Other manuals for PRO3
3
Table of contents
Other Quooker Plumbing Product manuals
Quooker
Quooker Scale Control Plus User manual
Quooker
Quooker PRO3 User manual
Quooker
Quooker Swap Guide
Quooker
Quooker COMBI User manual
Quooker
Quooker Nordic Assembly instructions
Quooker
Quooker PRO3 User manual
Quooker
Quooker COMBI User manual
Quooker
Quooker Swap User manual
Quooker
Quooker PRO3-VAQ B User manual
Popular Plumbing Product manuals by other brands
Weka
Weka 506.2020.00E ASSEMBLY, USER AND MAINTENANCE INSTRUCTIONS
Kohler
Kohler K-6228 Installation and care guide
UBERHAUS DESIGN
UBERHAUS DESIGN 75175017 Operator's manual
American Standard
American Standard DetectLink 6072121 manual
Uponor
Uponor Contec TS Mounting instructions
Pfister
Pfister Selia 49-SL Quick installation guide
Kohler
Kohler Centerset K-15240 Homeowner's guide
Viega
Viega Prevista Dry 8522.33 Instructions for use
Sanela
Sanela Lema SLP 59RB Instructions for use
Elkay
Elkay EDF15AC Installation, care & use manual
Hans Grohe
Hans Grohe AXOR Citterio E 36702000 Instructions for use/assembly instructions
baliv
baliv WT-140 manual