Pulsar W855 User manual
CAL. W855
DIGITAL QUARTZ
●Full-panel dot-matrix liquid crystal panel
●Time/calendar
●5-channel regular alarm
●10-hour stopwatch with memory recall function
●Metronome
●World time
●Button operation confirmation light
●Illuminating light (electroluminescent panel)
●Changeover between normal and enlarged displays
2
MODE CHANGE
●To change over a mode to another, press button A to return to the MENU display,
and then press the corresponding button to select the desired mode.
●Selection of a desired mode can be made by pressing the corresponding button
in the MENU display.
[MENU display]
* When the desired mode is selected, the opening graphic display is shown before the
selected mode appears.
E➡
D➡
C➡STOPWATCH
mode
B
➡
ALARM
mode
METRONOME
mode
WORLD TIME
mode
A
➡
TIME/
CALENDAR
mode
3
●In all modes except the METRONOME, the display can be selected
between the normal display that shows all the data with characters of a
normal size and the enlarged display that shows the main data with
characters of an enlarged size.
DWith each press, the normal and enlarged displays alternately
appear.
[Ex. : In TIME/CALENDAR mode]
CHANGEOVER BETWEEN NORMAL AND ENLARGED DISPLAYS
Normal display
(Data is shown in four rows)
D
➡
➡
Enlarged display
(Data is shown in three rows)
D
4
TIME/CALENDAR MODE
●Once the time/calendar of your area is set in the TIME/CALENDAR mode, the
times of the 38 cities covered in the WORLD TIME mode will be set automatically.
●Changeover between the standard time and daylight saving time can be made.
Press in MENU display to show TIME/CALENDAR mode.
A
Date
Day
Daylight saving time
(summer time) mark
Month
“EL” mark
Hourly time signal
mark
Time
B
A
C
D
E
5
TIME/CALENDAR SETTING
Press for 2 to 3 seconds to show TIME/CALENDAR SETTING
display.
B
▲
▲
Press to select the digits to be adjusted.
Selection of the digits
➾Seconds ➾Minutes ➾Hour
City ➾
➾
➾
12-/24-hour indication
➾
Year Month
➾
➾
Date
Standard time/
daylight saving time
D
▲
Set the flashing digits. (Increasing digits)
Set the flashing digits. (Decreasing digits)
C
E
or
▲
BReturn to TIME/CALENDAR mode.
6
SHOWING THE SELECTED CITY
Press to show the city selected for TIME/CALENDAR mode.
E
* The name of the selected city is displayed in place of the day, scrolls from right
to left, and then the day is displayed again.
TURNING ON/OFF OF HOURLY TIME SIGNAL AND
BUTTON OPERATION CONFIRMATION SOUND
CWith each press, the hourly time signal
and sound for button operation
confirmation are alternately switched
on and off.
* When the hourly time signal mark is
displayed, the hourly time signal rings
every hour on the hour and the
confirmation sound beeps with each press
of the buttons.
C
Hourly time signal mark
7
DEMONSTRATION FUNCTION
●Provided with a demonstration function, the watch shows the displays in
each mode.
EPress for 3 seconds in TIME/CALENDAR mode to start the
demonstration.
* The name of the selected city appears in place of the day, and then the
demonstration display will start, showing the display of each mode
repeatedly.
* To stop the demonstration, press button A, B, C, D or E.
ADJUSTING THE CONTRAST ON THE DISPLAY
CPress for 5 to 6 seconds in TIME/CALENDAR mode to show
CONTRAST ADJUSTMENT display.
▲
Cor EPress repeatedly to adjust the contrast.
▲
BReturn to TIME/CALENDAR mode.
8
ALARM MODE
●The alarm can be set to ring daily at five different times a day.
●The alarms can be engaged and disengaged independently of one another.
Press in MENU display to show ALARM mode.
B
Set alarm time
Alarm mark
Current time
Alarm channel
“ON” mark
C
D
E
B
9
ALARM TIME SETTING
E
▲
Press to select the desired alarm channel (Ch.-1 – Ch.-5).
B
▲
Press for 2 to 3 seconds to show ALARM SETTING display.
▲
Press to select the digits to be adjusted (hour/minutes).
D
▲
Set the flashing digits. (Increasing digits)
Set the flashing digits. (Decreasing digits)
C
E
or
▲
BReturn to ALARM mode.
* “ON” and the alarm marks appear and the alarm is automatically engaged.
10
ALARM ENGAGEMENT/DISENGAGEMENT
●The alarms can be engaged and disengaged independently of one another.
Press to select the desired alarm
channel (Ch.-1 – Ch.-5).
E
▲
With each press, the selected alarm is
engaged and disengaged alternately.
C
* At the designated time, the alarm rings for 20
seconds. To stop it manually, press any of the
buttons.
E
C
Alarm mark
“ON”/“OFF” mark
Table of contents
Other Pulsar Watch manuals
Pulsar
Pulsar VD59 User manual
Pulsar
Pulsar PJU Series User manual
Pulsar
Pulsar P1 User manual
Pulsar
Pulsar Y911 User manual
Pulsar
Pulsar PBK002 User manual
Pulsar
Pulsar VJ22 User manual
Pulsar
Pulsar CAL. VD53 User manual
Pulsar
Pulsar Y182 User manual
Pulsar
Pulsar VD84 User manual
Pulsar
Pulsar NX04 User manual
