Pulsar W650 User manual
CAL. W240, W620, W650
DIGITAL QUARTZ
●Time/calendar
●Stopwatch with 8 lap memory
●Countdown timer with preset and
adjustable timer functions
●Daily alarm
●Stroke function (Cal. W240, W620)
●Auto illumination function (Cal. W650)
●Electroluminescent panel
2
Mode mark
MODE CHANGE
Cal. W240, W620
(No mode mark in TIME/
CALENDAR mode)
Change modes A
STOPWATCH
➡
STROKE
ALARM
➡
➡
TIME/
CALENDAR
TIMER
➡
➡
Cal. W650
A
Mode mark
Change
modes
➡
➡
TIME/
CALENDAR
➡
STOPWATCH
➡
TIMER
ALARM
3
TIME/CALENDAR MODE
TIME/CALENDAR SETTING
Press for 2 to 3 seconds.
B
▲
CSelect the digits to be adjusted.
▲
DSet the flashing digits.
▲
▲
BReturn to TIME/CALENDAR
mode.
D
BC
Selection of the digits
Cal. W240, W620 Cal. W650
Seconds ➾Minutes ➾Hour ➾Date
➾
12-/24-hour indication Year Month
➾
➾
➾
➾Seconds ➾Minutes
AUTO ILLUMINATION
on/off
Hour
➾
➾➾
Date
12-/24-hour
indication
➾➾
Year Month
➾
4
AUTO ILLUMINATION FUNCTION (only for Cal. W650)
When the function is turned on:
●The display is illuminated with each press of a button to operate the watch.
●While the stopwatch or timer is counting, the display is illuminated every
minute to signal the lapse of time: For the first 19 minutes in the stopwatch
function and for the last 19 minutes in the timer function.
Press for 2 to 3 seconds.
B
▲
D
▲
B
Turn on/off the AUTO
ILLUMINATION FUNCTION.
The function
is on.
Return to TIME/CALENDAR mode.
5
STOPWATCH MODE
Lap time measurement
C
D
Start / Stop / Restart
Reset /
Measure lap time
▲
▲
▲
▲
C
START
D
LAP
D
LAP
D
RESET
C
STOP
Current time
B
Time measured
6
MEMORY RECALL FUNCTION
B
D
▲
B
▲
**In memory recall after measurement,
the oldest data in memory is displayed.
In memory recall during measurement,
the newest one is displayed.
D
B
●The stored data can be recalled either during or after the measurement.
Press to activate the memory
recall function.
**
With each press, stored data
are recalled from the oldest to
the newest.
Return to STOPWATCH mode.
7
STROKE MODE
(For Cal. W240 and W620)
●The number of strokes per minute is automatically calculated by measuring the
time required to make three strokes.
CPress to start measurement.
C
▲
CPress to stop measurement
when the third stroke is made.
* The number of strokes per minute
will be displayed.
8
TIMER MODE
PRESET TIMER SETTING
Select the preset time.
D
●Two types of timer are available: preset timer and adjustable timer.
* For Cal. W240 and W620, 9 different
lengths of time have been preset
for the timer.
For Cal. W650, 4 different lengths
of time have been preset for the
timer.
BC
D
Selection of the preset time/adjustable timer
Cal. W240, W620 Cal. W650
3 min. ➾5 min. ➾10 min. ➾15 min. ➾20 min.
45 min. 40 min. 35 min. 30 min.
➾
➾
➾
➾
➾
Adjustable timer ➾3 min.
15 min. 10 min. 5 min.
➾
➾
➾
➾
9
ADJUSTABLE TIMER SETTING
Select the adjustable timer. (only for Cal. W650)
D
▲
Press for 2 to 3 seconds.
B
▲
▲
CSelect the digits to be adjusted (hour/minutes).
▲
DSet the flashing digits.
▲
Return to TIMER mode.
B
TIMER OPERATION
B
Time measured
CStart / Stop / Restart
DReset
No. of times the countdown
is repeated
* When the set time is up, a
warning sound beeps for 5
seconds. To stop it manually,
press any one of the buttons.
10
ALARM MODE
ALARM SETTING
Press for 2 to 3 seconds.
B
▲
C
▲
▲
D
B
Set the flashing digits.
Return to ALARM mode.
▲
Select the digits to be adjusted
(hour/minutes).
BC
D
* The alarm is automatically engaged.
Alarm engagement/disengagement
“on” mark
Engage/disengage the alarm
C
Alarm mark
[ ]
[ Alarm engaged ]
Other manuals for W650
1
This manual suits for next models
2
Table of contents
Other Pulsar Watch manuals
Pulsar
Pulsar Y302 User manual
Pulsar
Pulsar NX11 User manual
Pulsar
Pulsar 7S26 User manual
Pulsar
Pulsar N944 User manual
Pulsar
Pulsar Y621 Operating instructions
Pulsar
Pulsar VK63 User manual
Pulsar
Pulsar VD57 User manual
Pulsar
Pulsar W150 User manual
Pulsar
Pulsar W890 User manual
Pulsar
Pulsar YM62 User manual
