Pulsar Y911 User manual
ENGLISH
★“WHITE-ON” display
A newly-developed transparent liquid crystal panel called “WHITE-ON”
display is provided over the analogue dial. It shows white characters
clearlywithoutblockingtheviewofthehandsanddial,andvariousdigital
displays can be turned on and off as you require. The watch, therefore,
serves as a multi-function digital watch as well as being an analogue
watch.
●Analogue time and digital calendar
●Single-time alarm
●3-channel regular alarm
●Stopwatch with 20 lap/split memory
CAL. Y911
WITH “WHITE-ON” DISPLAY
English
2
Minute hand
Press any one
of the buttons.
a b
Hour hand
Second
hand
CROWN
AC
B
a: Normal position : Free
b: Extended position : Time setting
Digital display turned off
English
3
STOPWATCH mode
SINGLE-TIME ALARM mode
REGULAR ALARM mode
CALENDAR mode
A
A
A
Press
BPress
CPress
(Press once.)
(Press twice.) A
(Press 4 times.)
English
4
[for models with screw down crown]
Unlocking the crown
Locking the crown
1Turn Crown counterclockwise until you no
longer feel the threads turning.
2Crown can be pulled out.
1Push Crown back in to normal position.
2TurnCrownclockwisewhilepressingitlightly
until tight.
English
5
Minutes ➾Hour ➾ Year ➾Month ➾ Date
➾
✽Selection of the digits
●Set the analogue and digital times at the same time.
B
C
A
CROWN
▲
B
Pulloutwhen Second hand
isat the12 o’clock position.
Select the digits to be
adjusted.✽
C
▲
Set the flashing digits.
▲
▲
CROWN TurntosetHourandMinute
hands to the digital time.
▲
CROWN Push back in accordance
with a time signal.
English
6
B
C
A
Mode
mark
Single-time alarm mark
(indicating the alarm is engaged)
●To disengage the alarm:
Band C
●The alarm time can be set to ring within 24 hours of the current time.
●The alarm rings once at a designated time and is automatically disengaged thereafter.
ALARM TIME SETTING
BPress in CALENDAR mode
to show SINGLE-TIME
ALARM mode.
A
▲
▲
Bor CSet the alarm time.
Return to CALENDAR mode.
* At the designated time, the alarm rings for 20
seconds. To stop it manually, press any one
of the buttons.
In SINGLE-TIME ALARM mode, press at the same time.
English
7
ALARM TIME SETTING
AIn REGULAR ALARM mode, select the desired alarm display.
▲
DISPLAY CHANGE IN REGULAR ALARM MODE
CPress in CALENDAR mode to show REGULAR ALARM mode.
AWith each press, the display changes in the following order.
▲
ALARM-1 ALARM-2
➾ALARM-3
➾➾HOURLY TIME
SIGNAL
➾
CALENDAR mode
●Three regular alarms can be set one by one to the desired alarm times.
They can be engaged and disengaged independently of one another.
English
8
“ON/OFF”
(Alarm engagement/
disengagement mark)
B
A
Mode mark
Regular alarm mark
(indicating any one of
three regular alarms is engaged)
Alarm No.
C
Show ALARM SETTING
display.
B
▲
BSelect the digits to be
adjusted.✽
C
▲
▲
▲
Set the flashing digits.
Return to REGULAR ALARM
mode.
B
*At the designated time, the alarm rings
for 20 seconds. To stop it manually,
press any one of the buttons.
✽Selection of the digits
Alarm
engagement/
disengagement
12-/24-hour
indication ➾
➾
REGULAR
ALARM
mode
➾ Hour ➾ Minutes ➾
English
9
TURNING ON/OFF OF HOURLY TIME SIGNAL
B
A
Hourly time signal mark
AInREGULARALARMmode,press
to select HOURLY TIME SIGNAL
display.
B
▲
Witheach press,hourlytimesignal
is turned on and off alternately.
▲
AReturn to CALENDAR mode.
English
10
●The stopwatch measures up to 12 hours in 1/100-second increments for the first 60
minutes and in 1-second increments thereafter.
●Up to 20 sets of lap and split times can be stored in memory for later recall.
DISPLAY SELECTION IN STOPWATCH MODE
APress in CALENDAR mode to show STOPWATCH mode.
CWith each press, the display changes alternately.
▲
LAP TIME SPLIT TIME
➾
➾
LAP mark
SPLIT
mark
C C
Table of contents
Other Pulsar Watch manuals
