Pulsar 5Y67 User manual
ENGLISH
CAL. 5Y67
RETROGRADE DAY INDICATOR
●Time indicates by the hour, minute and
second hands
●Date indicates by the date hand
●Day of the week indicates by the day
hand
●The 24-hour hand indicates the hour in
the 24-hour indication
English
2
DISPLAY AND CROWN
Date hand
Second hand
CROWN
Minute hand
a b c
Hour hand
24-hour hand
Day hand
(retrograde day
indicator: see page 7)
a. Normal position c. Second click
b. First click
*Orientation of the retrograde display may vary depending on the model.
English
3
SCREW DOWN CROWN
[for models with screw down crown]
Locking the crown
1Turn Crown counterclockwise until you no
longer feel the threads turning.
2Crown can be pulled out.
1Push Crown back in to normal position.
2Turn Crown clockwise while pressing it lightly
until tight.
English
4
➠
DAY AND TIME SETTING
2Turn clockwise to advance Hour
and Minute hands until Day hand
is set to the desired day of the
week.
➠
Day hand
CROWN
1Pull out to second click when Second
hand is at the 12 o’clock position.
3Turn to set the time.
4Push the crown back into the
normal position in accordance
with a time signal.
clockwise
counterclockwise
English
5
➠
Date hand
CROWN
2Turn counterclockwise to set Date
hand to the desired date.
1Pull out to first click.
3Push in.
DATE SETTING
English
6
NOTES ON OPERATING THE WATCH
TIME/DATE SETTING
●To advance the day hand quickly, turn back the hour and minute hands 4 to 5 hours
beyond the point the day changes (between 11:00 p.m. and 4:00 a.m.), and then
advance them again until the day hand is set to the next.
*The day hand will not move back by turning the crown counterclockwise.
●After the day hand reaches the last day of the week, turn the crown clockwise and the
hand will return to the first day of the week (retrograde day indicator).
●When adjusting the day hand, turn the crown slowly.
●The 24-hour hand moves correspondingly with the hour hand.
●When setting the hour hand, check that the 24-hour hand is correctly set.
●When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and
then turn it back to the exact time.
DATE SETTING
●Do not set the date hand between 9:00 p.m. and 1:00 a.m. Otherwise, it may not turn
properly.
●While setting the date hand, check that it moves properly in one-day increments.
●It is necessary to adjust the date on the first day after a 30-day month and February.
Table of contents
Other Pulsar Watch manuals
Pulsar
Pulsar VK63 User manual
Pulsar
Pulsar Y911 User manual
Pulsar
Pulsar Linetic Series User manual
Pulsar
Pulsar W860 User manual
Pulsar
Pulsar CAL. W440 User manual
Pulsar
Pulsar VD84 User manual
Pulsar
Pulsar W170 User manual
Pulsar
Pulsar NX04 User manual
Pulsar
Pulsar V145 User manual
Pulsar
Pulsar w863 User manual
Pulsar
Pulsar W540 User manual
Pulsar
Pulsar CAL. VD53 User manual
Pulsar
Pulsar W855 User manual
Pulsar
Pulsar NX11 User manual
Pulsar
Pulsar W522 User manual
Pulsar
Pulsar VJ33 User manual
Pulsar
Pulsar VX3K User manual
Pulsar
Pulsar Z021 User manual
Pulsar
Pulsar 7T32 User manual
Pulsar
Pulsar Pulsar ANALOGUE User manual
