Prorack K793 User manual

Table of contents

Popular Automobile Accessories manuals by other brands

James Baroud

James Baroud Odyssey user guide

Motorola

Motorola i50sx owner's manual

Yakima

Yakima 9MM STANDARD BIKE MOUNT instructions

Feniex

Feniex T3 instruction manual

Renault

Renault 77 11 423 180 Installation instruction

Kia

Kia E8300-4D000 manual

Brink

Brink 756843 installation instructions

Whispbar

Whispbar K085W Fitting instructions

v.link

v.link CI-VL2-PC-HSD manual

Viking

Viking Stack-Rack Assembly and use instructions

Aries

Aries 203015 installation manual

Choetech

Choetech AT0005 user manual

ZZ2

ZZ2 ZZAIR-PRO instruction manual

Holman

Holman 4A80L installation guide

Thule

Thule 2075 parts manual

Motorola

Motorola T325 quick start guide

TAUBENREUTHER

TAUBENREUTHER 16-3950 FITTING INSTRUCTION

DV8

DV8 FBJL-02 Product installation manual

K793

Fitting Kit

EN Fitting Instructions for Basic Carrier

x 1 x 1 x 4 x 1

x 1 x 1 x 1 x 1

Revision No: 5E 1

Fitting Kit K793

x 1 x 1 x 1 x 1

x 1

2

Fitting Kit K793

MAX kgs (lbs)

W/P WHD

Volkswagen

Polo, 5dr Hatch 09-+ AU 50 kgs (110 lbs) 50 kgs (110 lbs)

Polo, 5dr Hatch 09-+ NZ 50 kgs (110 lbs) 50 kgs (110 lbs)

Polo, 5dr Hatch 09-+ ZA 50 kgs (110 lbs) 50 kgs (110 lbs)

Polo, 5dr Hatch 11-+ CN 50 kgs (110 lbs) 50 kgs (110 lbs)

3

Fitting Kit K793

X

A B C 1 2 3

Polo, 5dr Hatch 09-+ (AU) -210mm 510mm - 880mm 835mm -

-8 -1/4ths" 20 1/16ths" - 34 5/8ths" 32 7/8ths" -

Polo, 5dr Hatch 09-+ (NZ) -210mm 510mm - 880mm 835mm -

-8 -1/4ths" 20 1/16ths" - 34 5/8ths" 32 7/8ths" -

Polo, 5dr Hatch 09-+ (ZA) -210mm 510mm - 880mm 835mm -

-8 -1/4ths" 20 1/16ths" - 34 5/8ths" 32 7/8ths" -

Polo, 5dr Hatch 11-+ (CN) -210mm 510mm - 880mm 835mm -

-8 -1/4ths" 20 1/16ths" - 34 5/8ths" 32 7/8ths" -

4

Fitting Kit EN

K793

First Time Installation

●Remove parts from inside the package and

check. Contact your dealer if any parts are

missing or damaged.

●This kit fits type A, B, C and D.

●These instructions show type A crossbar

fitted. They also apply to type B, C and D.

NOTE: Clamp images in these instructions may

not be representative of the clamps in this kit

5

Fitting Kit EN

K793

●Use keys to remove covers.

●Use hex screwdriver to reverse adjusting

screw 10 turns.

●Press adjusting screw and pull crossbar

legs out. Refer to the crossbar instructions

for crossbar adjustment method.

●Ensure each end of the crossbar is

adjusted equally.

6

Fitting Kit EN

K793

●Remove locking screw.

●Apply protective strip as shown.

Trim if required.

●It is important to put the clamps in the

correct position on the vehicle.

●Letters refer to the part numbers stamped

on clamps.

●Clamp Part Number:

A = C310

B = C311

C = D312

D = D313

7

Fitting Kit EN

K793

●Attach clamp to each leg. NOTE; clamps

may have labels showing their positions on

the vehicle (For example; "Front Right").

●Refit locking screw so that it goes through

the hole in the clamp. Do not begin to

tighten the locking screw.

●Refer to the underside of the pad for the

part number.

8

Fitting Kit EN

K793

●It is important to put the pads in the correct

position on the vehicle.

●Letters refer to the pad part numbers and

position.

●Pad Part Number:

A = 296

B = 295

C = 251

D = 250

●Place rubber pads (supplied with fitting kit)

on the vehicle roof. Pad may vary in shape

to that shown.

●Make sure the pad fits into the holes

underneath the foot.

9

Fitting Kit EN

K793

Fitment

●Clamps directly to edge of roof under the

doors

●Please check the front of this manual for

information relating specifically to your

vehicle.

●Place crossbar on vehicle. Minimum

recommended spacing between the bars is

700mm (27 1/2") (unless otherwise stated).

●Adjust the legs on the crossbar so that they

are positioned equally from the ends of the

crossbar, and the clamps engage firmly on

the body work of the vehicle.

●Tighten adjusting screw to 2 Nm (1.5 ft lb)

hand tight.

10