Promise VessJBOD 1730 User manual

VessJBOD

1730, 1740,

1830, 1830+, 1840, 1840+

Quick Start Guide

Kurzanleitung

Guide de démarrage rapide

Guida Introduttiva

Guía de inicio rápido

Руководство по быстрому началу

работы

クイックスタートガイド

快速安裝手冊

快速安装手册

빠른 시작 안내서

Version 2.0

VessJBOD 1730, 1740, 830, 1830+, 1840, 1840+ Quick Start Guide

Contents

English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Pусский язык . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

日本語 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116

繁體中文 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135

简体中文 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153

한국어 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172

Task 1: Unpacking the VessJBOD

VessJBOD Task List

• Task 1: Unpacking the VessJBOD (page 3)

• Task 2: Mounting VessJBOD in a Rack (page 7)

• Task 3: Installing Disk Drives (page 10)

• Task 4: Making Data and Management Connections (page 12)

• Task 5: Setting Up Serial Cable Connections (page 16)

• Task 6: Connecting the Power (page 17)

• Task 7: Setting Up the CLI Connection (page 19)

• Contacting Technical Support (page 20)

Task 1: Unpacking the VessJBOD

The VessJBOD box contains the following items:

•VessJBODUnit

•Quick Start Guide printed

• RJ11-to-DB9 serial data cable

• Screws for disk drives

(70 pieces for 16-bay, 50 pieces

for 12-bay)

• 1.5m (4.9 ft) Power cords

(1700 models, 1; 1800 models, 2)

• CD with Product Manual and Quick

Start Guide in PDF format

Warning

This is a Class A product. In a domestic environment this product

may cause radio interference in which case the user may be

required to take adequate measures.

Warning

The electronic components within the VessJBOD enclosure are

sensitive to damage from Electro-Static Discharge (ESD).

Observe appropriate precautions at all times when handling the

VessJBOD or its subassemblies.

VessJBOD 1000 Series Quick Start Guide

VessJBOD Model Line-up

Figure 1. 12-bay VessJBOD with the “original” drive carrier design

Figure 2. 12-bay VessJBOD with the “plus” drive carrier design

Model Interface Number

of Drives

Drive

Carriers

Power

Supplies

Controller

Fans

1840+ SAS 16 plus 2 external

1840 SAS 16 original 2 internal

1830+ SAS 12 plus 2 external

1830 SAS 12 original 2 internal

1740 SAS 16 original 1 internal

1730 SAS 12 original 1 internal

Drive Carrier LEDs

Drive Carriers Power and Status LEDs

Drive Carrier LEDs

Drive Carriers Power and Status LEDs

Task 1: Unpacking the VessJBOD

Figure 3. VessJBOD 1840+ rear view

Figure 4. VessJBOD 1730 rear view

Figure 5. VessJBOD 1830 rear view

External Fans

I/O ModulePower Supplies

I/O Module

Power Supply

Internal Fans

I/O Module

Power Supplies

Internal Fans

VessJBOD 1000 Series Quick Start Guide

Figure 6. VessJBOD 1830+ rear view

For descriptions of the LEDs, see page 17.

I/O Module

Power Supplies

External Fans

Task 2: Mounting VessJBOD in a Rack

The VessJBOD subsystem installs to the rack using the available mounting rails.

You can also use your existing rails.

Cautions

• At least two persons are required to safely lift, place, and

attach the VessJBOD unit into a rack system.

• Do not lift or move the VessJBOD unit by the handles, power

supplies or the controller units. Hold the subsystem itself.

• Do not install the VessJBOD unit into a rack without rails to

support the subsystem.

• Only a qualified technician who is familiar with the installation

procedure should mount and install the VessJBOD unit.

• Be sure all switches are OFF before installing the VessJBOD

unit or exchanging components.

• Mount the rails to the rack using the appropriate screws and

flange nuts, fully tightened, at each end of the rail.

• Do not load the rails unless they are installed with screws as

instructed.

• The rails available for the PROMISE VessJBOD unit are

designed to safely support that PROMISE VessJBOD unit

when properly installed. Additional loading on the rails is at

the customer’s risk.

• PROMISE Technology, Inc. cannot guarantee that the

mounting rails will support your PROMISE VessJBOD unit

unless you install them as instructed.

Note

To lighten the VessJBOD enclosure, remove the power supplies.

Replace the power supplies after the VessJBOD unit is mounted in

your rack.

VessJBOD 1000 Series Quick Start Guide

Figure 7.

A 16-bay VessJBOD mounted in a rack with the available rails

To install the VessJBOD unit into a rack with the available mounting rails:

1. Check the fit of the mounting rails in your rack system.

See page 9, Figure 8.

2. Adjust the length of the mounting rails as needed.

The rear rail slides inside the front rail. The rail halves are riveted together

and use no adjustment screws.

3. Attach the mounting rail assemblies to the outside of the rack posts, using

the attaching screws and flange nuts from your rack system.

Be sure the front rail support is on the bottom facing inward.

The alignment pins fit into the rack holes above and below the attaching

screws.

Use the attaching screws and flange nuts from your rack system. Tighten the

screws and flange nuts according to your rack system instructions.

4. Place the VessJBOD unit onto the rails.

5. Secure the VessJBOD unit to the rack.

One screw each side, in the upper hole only. Use the attaching screws and

flange nuts from your rack system. Tighten the screws and flange nuts

according to your rack system instructions.

Vertical Rack Post VessRAID subsystem

Mounting rails mount

outside the rack post

Handles mount

outside the rack post

Task 2: Mounting VessJBOD in a Rack

Figure 8. Rack mount assembly diagram

This completes rack mounting. Go to “Task 3: Installing Disk Drives” on page 10.

Inside of post

Rack front post

Rail attaching screws

(not included)

Rail adjustment screw

(center, outside of rail)

Flange

Inside of post

Rack back post

Front rail Rear rail

Support

Locating pins (2 on each end)

VessJBOD 1000 Series Quick Start Guide

Task 3: Installing Disk Drives

The VessRAID subsystems and VessJBOD expansion units support:

• SAS and SATA hard disk drives

• 3.5-inch hard disk drives

For a list of supported physical drives, download the latest compatibility list from

the PROMISE support website.

Drive Slot Numbering

You can install any suitable disk drive into any slot in the enclosure. The diagram

below shows how VessJBOD’s drive slots are numbered. Whether you have the

original or plus carriers, the slots are numbered the same.

Slot numbering is reflected in the WebPAM PROe and CLU user interfaces. See

Figures 9 and 10.

Figure 9. 16-bay VessJBOD drive slot numbering

Figure 10. 12-bay VessJBOD drive slot numbering

Install all of the drive carriers into the VessJBOD enclosure to ensure proper

airflow, even if you do not populate all the carriers with disk drives.

Installing Your Disk Drives

1. Remove a disk drive carrier.

2. Carefully lay the disk drive into the drive carrier at the front, so that the screw

holes on the sides line up.

This manual suits for next models

Table of contents

Languages:

Other Promise Storage manuals

Promise

Promise VTrak D5000 Series User manual

Promise

Promise Vess A Series User manual

Promise

Promise PEGASUS 2 R2+ User manual

Promise

Promise VTrak S3000 User manual

Promise

Promise SMARTSTOR NS4300N User manual

Promise

Promise VessRAID 1000f Series User manual

Promise

Promise Apollo User manual

Promise

Promise Vess A7000 Series User manual

Promise

Promise E610f User manual

Promise

Promise VTRAK M610p User manual

Promise

Promise Vess A2600 User manual

Promise

Promise VTRAK M610i User manual

Promise

Promise VTrak J830s User manual

Promise

Promise VTrak J5960 User manual

Promise

Promise ULTRATRAK RM4000 User manual

Promise

Promise VTRAK 15200 User manual

Promise

Promise VTrak N1616 User manual

Promise

Promise E610f User manual

Promise

Promise VessJBOD 1740 User manual

Promise

Promise VSky A1100 User manual

Promise

Promise Pegasus3 R4 User manual

Promise

Promise SmartStor NAS User manual

Promise

Promise Pegasus2 R6 User manual

Promise

Promise Pegasus J2 User manual

Popular Storage manuals by other brands

QNAP

QNAP TS 32PXU Series user guide

LaCie

LaCie RUGGED RAID user manual

Freecom

Freecom CLS DOCK Quick install guide

PNY

PNY Attache P-FD64MBATT3 install guide

HP StorageWorks MSL2024 Getting started

OLT

OLT 6x6 Maximizer Assembly manual

Transcend

Transcend JetFlash 160 Specifications

LaCie

LaCie RUGGED MINI user manual

Thunderbolt

Thunderbolt 600 user manual

Panasonic

Panasonic LB-DH8 series Operator's guide

Intel

Intel RAID High Availability user guide

LaCie

LaCie 12big Thunderbolt 3 Quick install guide

Spectra Logic

Spectra Logic T-Series Spectra T50e quick start guide

Panasonic

Panasonic LKM-F931-1 instruction manual

Tabernus

Tabernus Enterprise Erase E2400 user guide

Rocstor

Rocstor COMMANDER 3F series user manual

HP P9000 user guide

Western Digital

Western Digital Ultrastar Data60 installation guide