Premier Mounts LMVSP User manual

9531-000-013-0X v3.1 10/03/18

LMVSP

POP AND RELEASE ULTRA SLIM MOUNT

Installation Guide

premiermounts.com | p. 800.368.9700 | e. [email protected]

500 W Central Ave, Suite A, Brea, CA 92821 USA

Pencil Protective Eyewear

Electronic Stud Finder M6 or 1/4” Drill Bit M8 or 5/16” Concrete Drill Bit

Portable DrillPhillips Head Screwdriver Socket Wrench

13mm or 1/2” Socket10mm Socket

Level

Included Components

Required for installation

5/16” x 3” Lag Bolts

(Qty 4)

Thread Depth Indicator

(Qty 1)

Universal Spacers

(Qty 8)

Finned Anchors

(Qty 4)

M8 Washers

(Qty 4)

M8 Nylon Nut

(Qty 4)

5/16” Flat Washers

(Qty 4)

Universal Washers

(Qty 4)

M5 Allen Driver

(Qty 1)

M4 x 12mm (Qty 4)

M4 x 16mm (Qty 4)

M4 x 25mm (Qty 4)

M6 x 12mm (Qty 4)

M6 x 16mm (Qty 4)

M6 x 25mm (Qty 4)

M8 x 12mm (Qty 4)

M8 x 16mm (Qty 4)

M8 x 25mm (Qty 4)

Extension Bracket

(Qty 1 Pair)

Wall Mount

(Qty 1)

Bracket

(Qty 1 Pair)

Installation Guide

LMVSP

Page 2

Maximum Flat Panel Weight:

100 lb. / 45.35 kg.

premiermounts.com | p. 800.368.9700 | e. [email protected]

the vicinity of the mount.

2. Use a pencil to mark each of the wall studs.

Use a pencil to mark the upper right mounting location

of the wall stud.

Drill a pilot hole using a M6 or 1/4” drill bit on the

stud that was marked on the upper right.

1. Place the mount against the wall and align it

with the pilot hole.

2. Insert one (1) 5/16” x 3” lag bolt one (1) 5/16”

washer into the upper right pilot hole.

3. Use a socket wrench and a 1/2” socket to

tighten the lag bolt.

4. Do not over tighten the lag bolt.

Installation Guide

LMVSP

Page 3

Wood Stud Installation

premiermounts.com | p. 800.368.9700 | e. [email protected]

1. Level the mount

2. Use a pencil to mark the remaining three (3)

mounting locations

1. Insert one (1) 5/16” x 3” lag bolt and one (1) 5/16”

washer into each pilot hole.

2. Tighten all lag bolts using a socket wrench and

1/2” socket.

3. Do not over tighten the lag bolts

Drill a pilot hole in each of the three (3) marks with a

power drill and a M6 or 1/4” drill bit.

Installation Guide

LMVSP

Page 4

5 6

premiermounts.com | p. 800.368.9700 | e. [email protected]

Two people recommended for this step; one person

to level the mount and another person to mark the

mounting locations.

Drill a pilot hole in each of the four (4) mark areas

with a 3/8” masonry drill bit.

Insert the Finned anchors into each pilot holes.

Lightly tap each Finned anchors into place with a

hammer.

1. Insert one (1) 5/16” x 3” Lag Bolt and one (1) 5/16”

washer into each pilot holes.

2. Tighten all lag bolts using a socket wrench and

1/2” socket.

Installation Guide

LMVSP

Page 5

10 11

Concrete Wall Installation

premiermounts.com | p. 800.368.9700 | e. [email protected]

Use commercially available hardware to secure the spacer.

Utilize the same spacer for multiple LMVSP installations.

For illustration only. LMVSP Spacer will vary.

spacers. Simply repeat step one when installing each of the

surrounding LMVSP mounts. Use one spacer for each 2x2

installation by mounting it to the wall, or utilize the same spacer as

many times needed to complete an unlimited LMVSP large matrix

video wall.

1. Plumb and level and mark each corner where the LMVSP will

be mounted (or secure to the wall).

2. Install the second mount working in a horizontal direction.

3. Square, Level, and Plumb.

4. Repeat this step for each mount horizontally

1) Mount the LMVSP to the desired location.

2) Align and Level the spacer to the corner register tabs

of the mount.

Level

For ease of installation

installation tim on large video wall array. Contact Customer

Installation Guide

LMVSP

Page 6

premiermounts.com | p. 800.368.9700 | e. [email protected]

1) Insert a small straw or toothpick into the threaded inserts found

2) Use a pencil to mark the depth of the threaded insert on the

small straw or toothpick.

3) Mark the straw or toothpick 1/8” above the depth of the

threaded insert, as shown in Figure 1.

4) Insert the small straw or toothpick into the remaining threaded

inserts to compare and verify their depth using the straw or

toothpick’s 1/8” allowance mark.

5) Locate the correct diameter screw for the threaded insert.

If the selected screw is longer than the 1/8” allowance mark

on the small straw or toothpick, as shown in Figure 2 and

Figure 3, do not use this screw. The screw length must not

bypass the mark.

6) Test each size of the screws provided.

The correct screws should thread easily into the mounting

point and not pull out when tension is applied.

Small Straw or Toothpick

Marking the 1/8”

Allowance

Small Straw

or Toothpick

Small Straw

or Toothpick Depth Plus 1/8” Allowance

Mark

Depth Plus 1/8” Allowance

Mark

Optional adapters are available with the LMVSP mount.

Secure the adapters to the LMVSP brackets with the supplied

(4) M8 washers and (4) M8 nuts.

TOP

BOTTOM

TOP

BOTTOM

Securing the Adapters

Installation Guide

LMVSP

Page 7

Selecting the Mounting Hardware

premiermounts.com | p. 800.368.9700 | e. [email protected]

Universal Spacer Installation

Flat Panel

Universal Washer

Universal Spacer

Mounting Bracket

Mount Point

Mounting Screw

2) Identify the number and location of the thread inserts on the

3) Aligning the holes on each mounting bracket with the thread

minimum of two (2) screws per bracket.

Do not over tighten the mounting hardware.

Make sure the directional arrows on the mounting brackets

are facing up.

Universal Washer Installation

Universal Washers are designed to accommodate the various

M5, M6

Installation Guide

LMVSP

Page 8

Universal Spacers allow the user to attach the mounting bracket

Universal Spacer adds 1/4” to the distance between the mounting

The Universal Spacers must be stacked and oriented as

shown.

The Universal Spacers must only be installed between the

premiermounts.com | p. 800.368.9700 | e. [email protected]

Mounting bracket adjustments are factory pre-set (see Note).

This section requires two people.

hooks of both mounting brackets must be securely seated on

the upper and lower mounting rails.

wall panel.

3) Engage the top and bottom mounting brackets to the rails of the

mount.

Attaching the Flat-Panel to the Mount

being accidently dislodged from the LMVSP.

1) Locate the pre-installed security locking safety screw at

the bottom of each of the mounting brackets.

2) Use the M5 Allen driver (supplied) to tighten the locking

safety screw.

Locking Safety Screw Installation

Do not overtighten the locking safety screws.

Note: Tighten screw to surface, then tighten 1/4” turn

Pre-installed

Locking Safety Screw

( 1 per Bracket )

Note: These

registers must align

prior to installation.

They are factory set.

Check to determine

proper alignment

ONLY TIGHTEN AFTER

FINAL ADJUSTMENT

Installation Guide

LMVSP

Page 9

premiermounts.com | p. 800.368.9700 | e. [email protected]

Left

Control

Left

Control

Right

Control

Right

Control

TOPLOW

TOPLOW TOPLOW

TOPLOW

TOPLOW TOPLOW

TOPLOW

TOPLOW TOPLOW

TOPLOW

AND/

Installation Guide

LMVSP

Page 10

TILT DOWN

TILT UP

MOVE OUTWARD

MOVE INWARD

premiermounts.com | p. 800.368.9700 | e. [email protected]

Other manuals for LMVSP

Table of contents

Other Premier Mounts Rack & Stand manuals

Premier Mounts

Premier Mounts ECM-3763D User manual

Premier Mounts

Premier Mounts On-Wall Equipment GearBox UNI-GB User manual

Premier Mounts

Premier Mounts PTM-B User manual

Premier Mounts

Premier Mounts LMVLF User manual

Premier Mounts

Premier Mounts PFM-32C1 User manual

Premier Mounts

Premier Mounts UFA User manual

Premier Mounts

Premier Mounts AM300-B User manual

Premier Mounts

Premier Mounts CTM-MS1 User manual

Premier Mounts

Premier Mounts UNI User manual

Premier Mounts

Premier Mounts TL84-MS2 User manual

Premier Mounts

Premier Mounts INW-UNIFM User manual

Premier Mounts

Premier Mounts LPWS100 User manual

Premier Mounts

Premier Mounts Universal Tabletop Stand PSD-TTS/C User manual

Premier Mounts

Premier Mounts PBC- UMW User manual

Premier Mounts

Premier Mounts EST100 User manual

Premier Mounts

Premier Mounts PSM-442T User manual

Premier Mounts

Premier Mounts SVL Series User manual

Premier Mounts

Premier Mounts PBC-1.5 Series User manual

Premier Mounts

Premier Mounts Polaris MAG-EXT User manual

Premier Mounts

Premier Mounts LMVSP User manual

Premier Mounts

Premier Mounts SpiroLock SPI-PRO User manual

Premier Mounts

Premier Mounts PP-FCTA User manual

Premier Mounts

Premier Mounts PSD-EB User manual

Premier Mounts

Premier Mounts Universal Flat-Only Mount UFM User manual

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 