POSIFLEX XT-3915 User manual
1
Package Contents
Terminal with base stand………x1
60W power adaptor……………x1
Power cord……………………..x1
Screw for IO cable cover………x2
User manual……………………x1
Recovery or information CD......x1
Product Features
Standard Features
System
Intel Bay Trail-D J1900 2.0G up to 2.42G, 2M Cache, 4 core
Mechanical Structure
Fanless structure with Aluminum die-cast main unit casing
Water resistant structure allowing easy cleaning
Foldable base
Display
High-quality 15” TFT active matrix LCD monitor provided
with true-flat Projected Capacitive touch panel supporting
10-point multi-touch for 3815, with resistive touch panel for
XT-3915, and with Infrared touch panel for XT-3915IR
XT-3815/3915/3915IR
Fanless LCD Touch Terminal
User Manual
16780900050 Ver. D0
http://www.posiflex.com
2
Optional Items
System
DDR3L SODIMM memory expansions up to 8GB (Max.) for
XT-3815/3915/3915IR (J1900) in one SODIMM
Preload Windows POSReady 7 / Win 7 / Windows Embedded
8.1 Industry / Linux per request
WIFI
Wireless LAN module, through Mini PCI-E Interface
Connection Cable
Parallel extension cable
RJ50-to-DB9 serial port conversion cable
Split cable for 2 cash drawer control
Base
GEN 8E base including UPS battery and poweredUSB board,
and supporting 60W/80W/150W power adaptor
Integration Kit
Integrated side mount upgrade kits, such as SA-105 provided
with optional MSR, SA-205 provided with iButton, SA-305,
and SA-405
1”SATA SSD
PoweredUSB kit in GEN 8E base stand, such as PU-480 or
PU-490
Power adapter kits for 80W/150W power adapters
Back mount displays, such as LM/TM-3010/3014 and PD-
6307
3
Views of the XT-3815/3915/3915IR
Front and Rear Views of Terminal with Gen 7E Base Stand
Left Side View of Terminal with Gen 7E Base Stand
Bottom View of Terminal with GEN 7E Base Stand
Neck Cover
DDR3 Memory Cover
LCD Touch Panel
Power Indicator
Base Stand
HDD Cover
Hinge
for main unit
Cable Exit
Cable Cover
Power Button
Brightness Adjustment
Button “+”
Brightness Adjustment
Button “-”
USB 2.0 Port
Locking Hook
Bottom Plate
Rubber Cushion
Wrapping Screw
4
Front and Rear Views of Terminal with GEN 8E Base Stand
Left Side View of Terminal with GEN 8E Base Stand
Bottom View of Terminal with GEN 8E Base Stand
DDR3 Memory Cover
LCD Touch Panel
Power Indicator
Base Stand
HDD Cover
Hinge
for main unit
Cable Exit
Neck Cover
Cable Cover
Power Button
Brightness Adjustment
Button “+”
Brightness Adjustment
Button “-”
USB 2.0 Port
Locking Hook
Rubber Cushion
Wrapping Screw
PoweredUSB Board Cover
Bottom Plate
Power Adaptor Chamber
UPS Chamber
5
Views of I/O Interfaces of Terminal
1
DC-IN Power Jack
6
VGA Port
2
UPS Port
7
LAN Port
3
CR Port
8
USB 2.0 Port
4
DB9 COM Port
9
USB 2.0 Port
5
RJ50 COM Port
10
USB 3.0 Port
Positioning your POS for a Perfect Viewing Angle
The adjustable bases designed for XT-3815/3915/3915IR come in two models,
Gen 7E/8E, and allow you to determine an ideal position for your terminal by
using its unique tilt adjustment mechanism. As the below figures suggest, both
bases provide three standard positioning solutions for your terminal: Flat
Folded mode, Low Profile mode, and Full Extended mode.
XT-3815/3915/3915IR with Gen 7E Base
Flat Folded mode
Low Profile mode
Full Extended mode
XT-3815/3915/3915IR with Gen 8E Base
Flat Folded mode
Low Profile mode
Full Extended mode
1
2
3
6
4
5
7
8
9
10
6
In general, XT-3815/3915/3915IR will be set up beforehand in Flat Folded
mode and then packaged into the box for shipping. After it is unpacked, you
may re-adjust the terminal in either Low Profile mode or Full Extended mode
according to your situation. Below will provide instructions on how to adjust
the specific base connected to the POS system. As a reminder, please be
careful not to touch the LCD panel while setting up the tilt angle.
XT-3815/3915/3915IR with Gen 7E Base
Please refer to the following instructions on how to switch among different
positioning modes to find an ideal viewing angle for XT-3815/3915/3915IR
with Gen 7E base.
1. Unpack XT-3815/3915/3915IR, which is
supposed to be set in flat folded mode, out of
the package box and then lay your POS
system on a flat surface.
2. Steady the base with one hand, and then tilt
the screen downwards.
3. Position your terminal in Full Extended mode
3.1 After grabbing the bottom edge of the screen with your hand, gently
move the screen upward until the screen is locked into place with a
click sound.
7
3.2 Support the screen with one hand holding onto its bottom edge.
Then, while pulling the lever backwards, move the display upwards
until the lever is snapped into the lower hook to raise the screen as
shown in the below figure.
3.3 With the screen facing toward you, tilt the
screen up or down to your desired angle.
Please do not press on the LCD panel while
setting up the tilt angle.
3.4 Remove the cable cover from the base.
Lever
Lower
hook
8
3.5 Fix the base with two #/6/32-14L screws.
4. Return your terminal back to Flat Folded mode from Full Extended
mode.
4.1 Remove the cable cover from the base.
4.2 Remove the two screws from the base.
Remove the two screws.
9
4.3 Tilt your screen in a horizontal position.
4.4 Support the screen with one hand holding onto its bottom edge.
While pulling the lever backwards, move the display downwards
until the lever is lifted off the hook as shown in the figure.
4.5 Push the cable cover back.
4.6 Tilt the screen again to the horizontal
position.
Hook
Lever
10
5. Position the terminal in Low Profile mode.
5.1 Follow Step 4 to set up the termimal in Flat
Folded mode.
5.2 Tilt the screen all the way down
5.3 To tilt screen up or down to your desired
angle, please be advised to keep the base
steady with one hand to do so. Do NOT
press on the LCD panel while setting up the
tilt angle.
XT-3815/3915/3915IR with Gen 8E Base
Please refer to the following instructions on how to switch among different
positioning modes to find an ideal viewing angle for XT-3815/3915/3915IR
with Gen 8E base.
1. Unpack XT-3815/3915/3915IR, which is
supposed to be set in flat folded mode, out
of the package box and then lay your POS
system on a flat surface.
2. While steadying the terminal with your
hand holding onto the base, tilt the screen
down.
This manual suits for next models
2
Table of contents
Other POSIFLEX Touch Terminal manuals
POSIFLEX
POSIFLEX TP/LT- 5600 User manual
POSIFLEX
POSIFLEX XT-2614Q User manual
POSIFLEX
POSIFLEX MT-4310W/R User manual
POSIFLEX
POSIFLEX FT-6315 User manual
POSIFLEX
POSIFLEX Jiva KS-6615 Series User manual
POSIFLEX
POSIFLEX HC-1621IR User manual
POSIFLEX
POSIFLEX XT-2614E User manual
POSIFLEX
POSIFLEX XT-3615 User manual
POSIFLEX
POSIFLEX TM-7117E User manual
POSIFLEX
POSIFLEX RT-2015E User manual
POSIFLEX
POSIFLEX KS-6115 User manual
POSIFLEX
POSIFLEX MT-4308W Series User manual
POSIFLEX
POSIFLEX PS Series User manual
POSIFLEX
POSIFLEX Jiva 5815 Pro User manual
POSIFLEX
POSIFLEX KS - 2010 User manual
POSIFLEX
POSIFLEX SA-104 User manual
POSIFLEX
POSIFLEX Jiva LT 8015 User manual
POSIFLEX
POSIFLEX HS-35 W-G2 Series User manual
POSIFLEX
POSIFLEX RT-5015 User manual
POSIFLEX
POSIFLEX MT-5208A User manual
