POSIFLEX MT-4310W/R User manual
1
MT-4308W/R
MT-4310W/R
MT-4210A/R
Package Contents
MT-4308W/R or MT-4310W/R
or MT-4210A/R (x 1)
Pistol grip (x1)
15W power adaptor (x 1)
Stylus (x 1)
RB-3000 Battery pack for pistol grip
(x 1)
User manual (x 1)
Barcode scanner user manual (x 1)
MT-4308W/H
MT-4310W/H
MT-4210A/H
Package Contents
MT-4308W/H or MT-4310W/H
or MT-4210A/H (x 1)
15W power adaptor (x 1)
Stylus (x 1)
User manual (x 1)
12550900030 Ver. B0
http://www.posiflex.com
MT-4308W/4310W/4210A
Mobile Terminal System
User Manual
MT-4308W/4310W/4210A is required to be
charged over 8 hours when used for the first time.
2
Product Feature
Ergonomic Design
Pistol grip shape handle is ergonomically designed for easy handling of the
tablet.
Extra Protection
Hand strap strengthens the stability and eases user’s fatigue during the hours of
work.
All-in-one Solution
Optional dock station equips with a built-in 3” thermal printer and various I/O
connectivity; once the tablet is integrated with the dock station, an all-in-one
POS is instantly at your disposal.
Versatile Function
MSR attachment and 1D or 2D barcode scanner built in the pistol grip; MT-
4308W/4310W/4210A offers more than just mobility but versatility.
Long Hour Operation
MT-4308W/4310W/4210A is designed with advanced power saving
technology that provides long battery life for daily operation. The pistol grip
also houses a removable battery that can vastly extend the overall operating
time.
Views of MT-4308W/H
Front View
Rear View
LED Indicator
Rear Camera
Speaker
Hand strap
3-track Magnetic Stripe
Reader (Optional)
Projected Capacitive
Touch Screen
3-track Magnetic Stripe
Reader (Optional)
3
Top View
Left Side View
Right Side View
microUSB Port
Power Button
Micro SD Card Slot
Mic-in/Line-Out
Combo Jack
Docking Station Connector
5VDC-IN Power Jack
Docking Station Locking Hole
4
Views of MT-4310W/H & MT-4210A/H
Front View
Rear View
Left Side View
microUSB Port
LED Indicator
Mic-in/Line-Out
Combo Jack
Rear Camera
Speaker
Hand strap
3-track Magnetic Stripe
Reader (Optional)
Docking Station Connector
5VDC-IN Power Jack
Docking Station Locking Hole
Projected Capacitive
Touch Screen
3-track Magnetic Stripe
Reader (Optional)
5
Right Side View
Load RB-3000 Battery Pack and a stylus into Pistol Grip PG-
200E (for MT-4308W/R & MT-4310W/R & MT-4210A/R)
MT-4308W/R, MT-4310W/R and MT-4210A/R with PG-200E pistol grip
support 1D CCD, 1D Laser, and 2D barcode scanner. Before the scanner can
be initiated, it is required to install the battery pack RB-3000 and a stylus in
the battery compartment inside the pistol grip. Please follow the steps listed
below to finish the installation.
1. Press down the lever and then push up the cover for battery
compartment as shown in the figure.
2. To replace the existing battery, gently push
the metal clip outwards to release the
battery. If you are installing the battery for
the first time, please skip to the next step.
Metal clip
Power Button
Micro SD Card Slot
Smart Card Reader
(Optional)
6
3. After having the rail on the battery pack
aligned with battery clip, push down the
battery pack into battery compartment.
4. Push down the cover to close the battery
compartment.
Connecting the Pistol Grip onto MT-4308W/R & MT-
4310W/R & MT-4210A/R
MT-4308W/R, MT-4310W/R and MT-4210A/R models are equipped with an
additional pistol grip which aims to help users grip the terminal more easily
while they are operating the scanner. Please refer to the following instructions
to install the pistol grip onto the tablet.
1. To attach the pistol grip to the tablet, align the arrow head on the top
side of the pistol grip with the tail of the arrow on the rear of the
tablet.
2. After ensuring the pistol grip is well
attached to the tablet, push the pistol
grip in the direction indicated by the
arrow as shown in the figure.
7
3. Make sure the head of the down arrow on the pistol grip is supposed to
be aligned with the head of the arrow on the rear side of the tablet as
the below figure shows, which indicates the pistol grip is well
mounted.
4. To check how much battery capacity
remains in PG-200 pistol grip, press the
battery capacity checking button on the
pistol grip to show the current battery
capacity level through the LED
indicator.
Replacing the Pistol Grip with a Hand Strap Cover (Optional)
The hand strap cover is an optional peripheral designed for users to easily hold
the tablet for operation. To replace the pistol grip with a hand strap cover,
follow the steps listed below.
1. While pushing the release lever to the left
(1), slide the pistol grip in the direction
indicated by the arrow in the figure (2).
2. Pull the pistol grip off from the tablet.
1
1
2
2
8
3. Align the hand strap cover with the grooves
on the rear side of the table.
4. Make sure that the hand strap cover is well
attached to the rear side of the tablet.
5. Slide the hand strap cover up in the
direction indicated by the arrow until it is
clicked into place.
6. Fasten the hand strap cover onto the tablet
using a screw.
Replacing the Hand Strap Cover with a Pistol Grip (Optional)
Please follow the below steps to replace the hand strap cover with a pistol grip.
1. Loosen the screw to remove the hand strap
cover from the tablet.
9
2. Slide the hand strap cover down in the
direction indicated by the arrow.
3. Remove the hand strap cover from the rear
side of the tablet.
4. Go through the Connecting the Pistol Grip onto MT-4308W/R &
MT-4310W/R & MT-4210A/R section which is described
previously to complete the installation of the pistol grip onto the
tablet.
Installing micro SD Card card in MT-series
Please follow the below steps complete the installation of micro SD card.
1. Turn off MT-series completely. Then, pull off the rubber cover
located on the right side of your tablets to find micro SD card slot
2. To insert a micro SD card into the micro
SD card slot, make sure the side with the
golden finger of the card faces
downwards, and then slide the card down
into the slot
3. Pull off the rubber cover to close the compartment.
4. If you attempt to release a micro SD card from the slot, push the
card with your fingertip to slide it out.
10
Charging the Battery
Below are some cautionary advices you need to keep in mind while you
attempt to charge the battery.
1. MT-4308W/4310W/4210A is required to be charged over 8 hours
when used for the first time.
2. When the low battery warning message appears as shown below,
please fully charge the battery to avoid data loss.
3. When the low battery capacity indicator on the pistol grip beams or
low battery warning message appears, please charge or replace the
battery for the pistol grip immediately.
4. Only charge the battery with power adapter which comes with
MT-4308W/4310W/4210A. Using a different power adapter may
damage your device.
5. When the battery is running very low (less than 6 percent of battery
capacity), the system will be automatically shut down to protect the
battery from being over-discharged.
Please go through the following instructions to charge MT-4308W/4310W
using the power adapter.
For MT-4308W/R & MT-4310W/R & MT-4210A/R
In considering the battery life could be consumed drastically under heavy
usage, you may also choose to purchase either another replacement battery
RB-3000 for the pistol grip or the battery charger CS-100 for rapidly charging
the replacement battery RB-3000.
1. Connect the power connector of the
power adaptor to the tablet.
2. Plug the AC power adaptor cord into an electrical outlet. In general,
the tablet battery will be charged first. Once the process of charging
the tablet is complete, the pistol grip battery will then be charged.
This manual suits for next models
5
Table of contents
Other POSIFLEX Touch Terminal manuals
POSIFLEX
POSIFLEX KS - 6215N User manual
POSIFLEX
POSIFLEX XP-3000 Series User manual
POSIFLEX
POSIFLEX HS-3310A-G2 User manual
POSIFLEX
POSIFLEX XT6315 User manual
POSIFLEX
POSIFLEX KS - 6810 User manual
POSIFLEX
POSIFLEX PS-3515 User manual
POSIFLEX
POSIFLEX Jiva TP-5815 Pro series User manual
POSIFLEX
POSIFLEX KS-6812A User manual
POSIFLEX
POSIFLEX HC-1521 Series User manual
POSIFLEX
POSIFLEX RT-2015-G2 User manual
POSIFLEX
POSIFLEX PS-3515-G2 User manual
POSIFLEX
POSIFLEX HC-1621IR User manual
POSIFLEX
POSIFLEX KS - 6915 User manual
POSIFLEX
POSIFLEX LCD Customer Display PD-7100 User manual
POSIFLEX
POSIFLEX PST-1000 Series User manual
POSIFLEX
POSIFLEX XP-3000 Series User manual
POSIFLEX
POSIFLEX PST-6000 SERIES User manual
POSIFLEX
POSIFLEX KV-2000 Series User manual
POSIFLEX
POSIFLEX Jiva LT 8015 User manual
POSIFLEX
POSIFLEX KS-7410 User manual
