POSIFLEX TM-7117E User manual

Package Contents

17” TM/LM-7117E

Standalone Monitor……………….(x 1)

VGA Cable………………………..(x 1)

USB type A to B cable...……….....(x 1)

Power Cord………………………..(x 1)

12V/40W Power Adapter………....(x 1)

User Manual………………………(x 1)

Product Features

17” TFT LCD panel

LCD resolution up to 1280 x 1024

5-wire resistive or IR touch panel for TM-7117E

Easy tilt angle adjustment from 15˚to 70˚

2 x USB port support

Optional side attachment support (SD-466Z or KP-300W)

Optional VESA mounting kit (WB-6000V-B)

Dimension : 401 mm (H) x 385 mm (W) x 286 mm (D);

Weight : 6.82 kg

19630902010 Ver. Original

http://www.posiflex.com

TM/LM-7117E

Standalone POS Monitor

User Manual

Views of the TM/LM-7117E

Front View

Rear View

Bottom View

Side Mount Cover

Release Button

Cable Exit

17”LM-7117E LCD Panel

17”TM-7117E Resistive or IR Touch Panel

LED Indicator

Cable Holder

Cable Groove

Rubber Feet with Fixing Screw

Cable Passage

Gen 5 Base

Cable Cover

Rubber Feet with Fixing

Screw

Left-Side View

Right-Side View

I/O Ports

VGA Port

USB (Type B) Port

DC-IN Power Jack

USB (Type A)

Port

OSD button

EXT button

＋button

－button

Tilt Adjustment Lever

OSD Control Button

Power button

Positioning your monitor for a Perfect Viewing Angle

Follow the below steps to adjust the viewing angle for TM/LM-7117E with

Gen5 base stand using the tilt adjustment lever.

1. After pushing down the tilt adjustment lever on

the right side of the stand, tilt the screen up or

back to your desired angle.

2. Release the adjustment lever to lock the LCD

panel into place.

Connecting VGA and USB Cables

Gen5 base features its own cable management to help you well organize the

cords. The following will provide some useful cable-routing instructions for

you to connect VGA and USB cables to TM/LM-7117E.

1. To release LCD panel from Gen5 base, support your monitor with one

hand holding to the bottom of the panel and then push it up while

pressing down the release button located on the back of TM/LM-7117E.

2. Laying Gen5 base stand with its bottom facing

towards you.

Tilt adjustment lever

Release

Button

3. Take power adaptor, VGA and USB cables,

and then neatly thread the cables along the

cable groove first, and then snap it into the

cable holder as shown in the figure.

4. Pass the cables through the cable passage.

5. Place Gen5 base in upright position and make

sure the cables can be pulled out of the cable

passage.

6. Lift your monitor to aim four screw bolts on the rear of the monitor to

the four screw holes on the Gen5 base. Then, along the rail slots push

down the monitor until the LCD panel is well locked into place with a

click sound.

7. Connect the monitor to the terminal using VGA cable.

7.1 Connect one end of the VGA cable to

the VGA port at the bottom I/O plate

of your monitor.

7.2 Take the other end of VGA cable to insert it into the VGA port

of your terminal.

Cable groove

Cable holder

Cable passage

8. For TM series or LM series with side attachment, please connect the

monitor to the terminal using USB type A to B cable to enable touch

function for your monitor.

8.1 Grab Type-B connector of USB

cable, and then insert it into Type-B

USB port of your monitor

8.2 Properly attach Type-A connector of USB cable to your POS

terminal.

9. To use external sources to supply power to

your monitor, plug power adapter to the DC-In

power jack and then connect its power cord to

electrical outlet.

Powering ON/OFF your Monitor

To start up TM/LM-7117E, you have to make sure that the monitor is well

connected to POS terminals and electricity is supplied to the monitor through

external power sources.

Power ON TM/LM -7117E

Press the power button of the terminal to power up the terminal. Few seconds

later the monitor will be initiated automatically.

Power OFF TM/LM -7117E

After following the standard shutdown procedure to shut down your terminal,

the monitor will be consequently turned off.

Power LED Indicator

Power LED indicator, located at the bottom of the screen, is used to notify

users of the current status of your monitor by emitting various LED signals.

Please refer to the below chart to accurately interpret the of the indicators

status to facilitate your troubleshooting.

Status

Description

ON, solid blue

System power ON

ON, solid green

System Standby

OFF

System power OFF

Identifying your Monitor as Secondary Touchscreen Monitor

in Extended Mode

Based on the type of your touch panels, you are required to adopt different

approaches to set up TM series as the extended monitor when you attempt to

extend the desktop across multiple monitors. In the following section the

related descriptions will be offered to help you achieve the purpose.

For TM-7117E Model with Resistive or IR Touchscreen

For TM-7117E users, please follow the below instructions to complete

installation of The Dual Touch Manager, a tool designed to allow your monitor

to work as a secondary touchscreen monitor in extended mode.

1. Make sure that the monitor is well connected to your POS terminal with

USB type A to B cable.

2. Visit Posiflex official site ( http://www.posiflex.com/en-

global/Home/index). Or, you may find USB Dual Touch Manager from

your Posiflex POS terminal instead.

3. Click on Products, which is located on the upper right side of your

browser window. Then, select POS Monitor in the pop-up menu.

4. Select Standalone type of POS monitor. After scrolling down the page,

click on TM-7117E item.

5. Click on the Download tab, and then Drivers & Utility.

6. Click Setup icon of USB Dual Touch Manager to install the USB

Dual Touch Manager.

7. Follow the instructions to complete the manager installation. After the

installation is finished, restart your terminal.

Setting up Display Resolution for Your Monitor

The below chart defines the list of recommended display settings for

TM/LM-7117E. Improper display configuration will prevent the monitor from

properly displaying the image and lead to a warning message of “out of range”

prompted on the screen.

Display

Resolution

Horizontal Frequency

(KHz)

Refresh Rate (Hz)

640 x 400

31.5

640 x 480

31.5

37.9

37.5

720 x 400

31.5

800 x 600

35.1

37.9

48.1

46.9

1024 x 768

48.4

56.5

1280 x 1024

Using the OSD Menu

OSD, as known as On-Screen Display, is employed to assist users in adjusting

a variety of monitor-related settings depending on personal preference.

Through this section, it is expected to familiarize you with the options which

are accessible via OSD menu, and to optimize your experiences with

TM/LM -7117E.

Power & OSD Buttons

Power & OSD buttons are available on the right-

hand side of the LCD monitor. Each of four OSD

controls works differently in various occasions.

Please refer to the below figure to get an idea of

how they could possibly function in relation to

OSD menu.

Icon

Description

OSD button

While OSD menu is activated:

to select the specific menu option

While OSD menu is deactivated:

to activate the OSD menu

EXT button

While OSD menu is activated:

to exit from the current configuration

“＋” Button

While OSD menu is activated:

to navigate through OSD menu options

to increase the value of the specific item

“－” Button

While OSD menu is activated:

to navigate through OSD menu options

to decrease the value of the specific item

While OSD menu is deactivated:

to initiate auto-adjustment function

Power Button

turn on/off the monitor

To help you get started with the OSD menu, the following points are

guidelines you are suggested to go through:

1. Firstly, press the OSD button to access the OSD menu.

2. Scroll through OSD menu options using either the “＋” or “－” button.

3. Press the OSD button to select the particular menu option of interest. It

will lead you to its sub-menu page if the selected menu option contains

sub-menu items.

4. Under the selected menu item with available sub-menu items, use the

“＋” or “－”button to switch among different items. Then, press the

OSD button to select the sub-menu item which you intend to adjust.

5. Use the “＋” or “－” button to adjust the value of the selected OSD item.

Then, press the OSD button to save settings.

6. Press the EXT button to exit from the current configuration.

This manual suits for next models

Table of contents

Other POSIFLEX Touch Terminal manuals

POSIFLEX

POSIFLEX HS-3510W-E User manual

POSIFLEX

POSIFLEX XT-4015-G2 User manual

POSIFLEX

POSIFLEX TX-3000 Series User manual

POSIFLEX

POSIFLEX KS - 6810 User manual

POSIFLEX

POSIFLEX MT-4308W Series User manual

POSIFLEX

POSIFLEX KS - 6715 User manual

POSIFLEX

POSIFLEX Jiva LT-5600 User manual

POSIFLEX

POSIFLEX TX-5300 User manual

POSIFLEX

POSIFLEX PS-3415 User manual

POSIFLEX

POSIFLEX PS-3315 User manual

POSIFLEX

POSIFLEX XT-3817 User manual

POSIFLEX

POSIFLEX KS - 6910 series User manual

POSIFLEX

POSIFLEX KS - 6915 User manual

POSIFLEX

POSIFLEX HS-35 W-G2 Series User manual

POSIFLEX

POSIFLEX HC-1521 Series User manual

POSIFLEX

POSIFLEX Jiva TP-5815 Pro series User manual

POSIFLEX

POSIFLEX HT-4712 User manual

POSIFLEX

POSIFLEX PB-7700 Series User manual

POSIFLEX

POSIFLEX Jiva LT - 8300 User manual

POSIFLEX

POSIFLEX RT-1016A-G2 User manual

POSIFLEX

POSIFLEX JIVA TP-5700 User manual

POSIFLEX

POSIFLEX MT-4210A User manual

POSIFLEX

POSIFLEX KS-6812 User manual

POSIFLEX

POSIFLEX HT-2000 Series User manual

Popular Touch Terminal manuals by other brands

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced user manual

Ingenico

Ingenico AXIUM EX4000 user guide

Heisei Electronics

Heisei Electronics Q-POS 815 user guide

Amano

Amano MTX-15 installation guide

FLOWBIRD

FLOWBIRD CWT Compact Touch manual

Demco

Demco SP7 installation guide

Lathem

Lathem PC600 Series user guide

Partner

Partner MF-2352 user manual

NCR

NCR RealPOS 7460-2 supplementary guide

Simrad

Simrad MS50 Manual guide

Unitech

Unitech MR350 MKII Software guide

Jungheinrich

Jungheinrich WMT 210 Service manual

Motorola

Motorola MTP850 user guide

YASKAWA

YASKAWA 62H-MDC0 manual

MVG industries

MVG industries NeptuLink user manual

Price Industries Limited

Price Industries Limited FDC Installation, operation & maintenance manual

Honeywell

Honeywell TemaKey installation manual

EBN

EBN BPC65-B-A16G user manual