POSIFLEX MT-4210A User manual

MT-4210A/R

Package Contents

MT-4210A/R………………………...(x1)

Pistol grip…………………………….(x1)

5V/15W power adaptor……...……....(x1)

Stylus………………………………...(x1)

RB-3000 Battery pack for pistol grip..(x1)

User manual………………………….(x1)

Barcode scanner user manual………..(x1)

MT-4210A/H

Package Contents

MT-4210A/H………………………...(x1)

5V/15W power adaptor……………...(x1)

Stylus………………………………...(x1)

User manual………………………….(x1)

MT-4210A is required to be charged over 8 hours when being

used for the first time.

MT-4210A

Mobile Terminal System

User Manual

12570900020 Ver. B0

http://www.posiflex.com

SOME IMPORTANT NOTES

FCC NOTES

This system meets industry & government requirements and applicable

standards. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions

manual, may cause interference to radio communications. It has been tested

and found to comply with limits for a Class A digital device pursuant to

subpart B of Part 15 of FCC Rules, which are designed to provide reasonable

protection against interference when operated in a commercial environment.

Operation of this equipment in a residential area is likely to cause interference

in which case the user at his own expense will be required to take whatever

measures to correct the interference.

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

CE CLASS A WARNING

This equipment is compliant with Class A of CISPR 32. In a residential

environment this equipment may cause radio interference.

WARRANTY LIMITS

Warranty will terminate automatically when the machine is opened by any

person other than the authorized technicians. The user should consult his/her

dealer for the problem happening. Warranty voids if the user does not follow

the instructions in application of this merchandise. The manufacturer is by no

means responsible for any damage or hazard caused by improper application.

警告使用者

這是甲類的資訊產品，在居住的環境中使用時，可能會造成射頻干擾，在這種情

況下，使用者會被要求採取某些適當的對策。

BATTERY CAUTION NOTES

Dispose of used batteries according to the instructions.

Replacement of a battery with an incorrect type that can defeat a

safeguard (for example, in the case of some lithium battery types)

Disposal of a battery into fire or a hot oven, or mechanically crushing

or cutting of a battery that can result in an explosion.

Leaving a battery in an extremely high temperature surrounding

environment that can result in an explosion or the leakage of flammable

liquid or gas.

A battery subjected to extremely low air pressure that may result in an

explosion or the leakage of flammable liquid or gas.

BATTERIE ATTENTION NOTES

Jetez les piles usagées conformément aux instructions.

Remplacement d'une batterie avec un type incorrect qui peut annuler

une sauvegarde (par exemple, dans le cas de certains types de batterie

au lithium)

Mise au rebut d'une batterie dans le feu ou dans un four chaud, ou

écrasement ou coupure mécanique d'une batterie pouvant entraîner une

explosion.

Laisser une batterie dans un environnement environnant à des

températures extrêmement élevées pouvant entraîner une explosion ou

la fuite de liquide ou de gaz inflammable.

Une batterie soumise à une pression atmosphérique extrêmement basse

pouvant provoquer une explosion ou une fuite de liquide ou de gaz

inflammable.

警告

本電池如果更換不正確會有爆炸的危險，請依製造商說明書處理用過之

電池。

Product Feature

Ergonomic Design

Pistol grip shape handle is ergonomically designed for easy handling of the

tablet.

Extra Protection

Hand strap strengthens the stability and eases user’s fatigue during the hours of

work.

All-in-one Solution

Optional dock station equips with a built-in 3” thermal printer and various I/O

connectivity; once the tablet is integrated with the dock station, an all-in-one

POS is instantly at your disposal.

Versatile Function

MSR attachment and 1D or 2D barcode scanner built in the pistol grip; MT-

4210A offers more than just mobility but versatility.

Long Hour Operation

MT-4210A is designed with advanced power saving technology that provides

long battery life for daily operation. The pistol grip also houses a removable

battery that can vastly extend the overall operating time.

Views of MT-4210A/H

Front View

Rear View

LED Indicator

Rear Camera

Speaker

Hand strap

Expansion Slot for

Optional Attachment

Projected Capacitive

Touch Screen

Rubber Cushion

Bottom Side View

Left Side View

microUSB Port

Power Button

Nano SIM Card Slot

(Only available for MT-4210A series

with 4G module)

Micro SD Card Slot

Mic-in/Line-Out

Combo Jack

Docking Station Connector

5VDC-IN Power Jack

Docking Station Locking Hole

Smart Card Reader

(Optional)

Loading RB-3000 Battery Pack and a Stylus into PG-200E

(for MT-4210A/R)

The MT-4210A/R working with PG-200E pistol grip supports 1D CCD

barcode scanner, 1D laser barcode scanner, and 2D imager. Before the

scanner/imager can be initiated, it is required to install the RB-3000 battery

pack and a stylus in the battery compartment inside the pistol grip. Please

follow the steps listed below to finish the installation.

1. Press down the lever and then push up the cover for battery

compartment as shown in the figure.

2. To replace the existing battery, gently push

the metal clip outwards to release the

battery. If you are installing the battery for

the first time, please skip to the next step.

3. After having the rail on the battery pack

aligned with battery clip, push down the

battery pack into battery compartment.

4. Push down the cover to close the battery

compartment.

Metal clip

Connecting the Pistol Grip onto MT-4210A/R

The MT-4210A/R model is equipped with an additional pistol grip which aims

to help users grip the terminal more easily while they are operating the scanner.

Please refer to the following instructions to install the pistol grip onto the tablet.

1. To attach the pistol grip to the tablet, align the arrow head on the top

side of the pistol grip with the tail of the arrow on the rear of the

tablet.

2. After ensuring the pistol grip is well

attached to the tablet, push the pistol

grip in the direction indicated by the

arrow as shown in the figure.

3. Make sure the head of the down arrow on the pistol grip is supposed to

be aligned with the head of the arrow on the rear side of the tablet as

the below figure shows, which indicates the pistol grip is well

mounted.

4. To check how much battery capacity

remains in PG-200 pistol grip, press the

battery capacity checking button on the

pistol grip to show the current battery

capacity level through the LED

indicator.

Replacing the Pistol Grip with a Hand Strap Cover (Optional)

The hand strap cover is an optional peripheral designed for users to easily hold

the tablet for operation. To replace the pistol grip with a hand strap cover,

follow the steps listed below.

1. While pushing the release lever to the left

(1), slide the pistol grip in the direction

indicated by the arrow in the figure (2).

2. Pull the pistol grip off from the tablet.

3. Align the hand strap cover with the grooves

on the rear side of the table.

4. Make sure that the hand strap cover is well

attached to the rear side of the tablet.

5. Slide the hand strap cover up in the

direction indicated by the arrow until it is

clicked into place.

6. Fasten the hand strap cover onto the tablet

using a screw.

Replacing the Hand Strap Cover with a Pistol Grip (Optional)

Please follow the below steps to replace the hand strap cover with a pistol grip.

1. Loosen the screw to remove the hand strap

cover from the tablet.

2. Slide the hand strap cover down in the

direction indicated by the arrow.

3. Remove the hand strap cover from the rear

side of the tablet.

4. Go through the Connecting the Pistol Grip onto MT-4210A/R

section which is described previously to complete the installation of

the pistol grip onto the tablet.

Installing a microSD Card and a SIM Card in MT-4210A

Please follow the below steps complete the installation of a micro SD card and

a SIM card.

1. Turn off MT-4210A completely. Then, pull off the rubber cover

located on the left side of your tablet to find a micro SD card slot

and a nano-SIM card slot.

2. Have the rear of the tablet face towards you to install the microSD

card and the nano-SIM card.

2.1. To insert the microSD card into the

microSD card slot, make sure the

side with the golden finger of the

card faces downwards, and then slide

the card down into the slot.

2.2. Similarly, to install the nano-SIM

card, push the nano-SIM card into

the nano-SIM card slot with its gold

contacts facing towards you.

3. Pull off the rubber cover to close the compartment.

4. If you attempt to release a micro SD card or SIM card from the

slot, push the card with your fingertip to slide it out.

Charging the Battery

Below are some cautionary advices you need to keep in mind while you

attempt to charge the battery.

1. MT-4210A is required to be charged over 8 hours when being used for

the first time.

2. When the low battery warning message appears as shown below,

please fully charge the battery to avoid data loss.

3. When the low battery capacity indicator on the pistol grip beams or

low battery warning message appears, please charge or replace the

battery for the pistol grip immediately.

This manual suits for next models

Table of contents

Other POSIFLEX Touch Terminal manuals

POSIFLEX

POSIFLEX KS-6115 User manual

POSIFLEX

POSIFLEX XP-2000 Series User manual

POSIFLEX

POSIFLEX LM-31XXE User manual

POSIFLEX

POSIFLEX XT-5415 User manual

POSIFLEX

POSIFLEX KS-7415 User manual

POSIFLEX

POSIFLEX TX-2000 User manual

POSIFLEX

POSIFLEX JIVA HS-2410W User manual

POSIFLEX

POSIFLEX PB-4700DVI User manual

POSIFLEX

POSIFLEX Jiva KS-6615 Series User manual

POSIFLEX

POSIFLEX XT-3015 User manual

POSIFLEX

POSIFLEX KS-6812A User manual

POSIFLEX

POSIFLEX RT-2015E User manual

POSIFLEX

POSIFLEX DT-207 series User manual

POSIFLEX

POSIFLEX HC-1521 Series User manual

POSIFLEX

POSIFLEX RT-1016A User manual

POSIFLEX

POSIFLEX PS-3515 User manual

POSIFLEX

POSIFLEX PD - 7301 Series User manual

POSIFLEX

POSIFLEX HT-3200 SERIES User manual

POSIFLEX

POSIFLEX XT-3815-G2 User manual

POSIFLEX

POSIFLEX PST-7000 Series User manual

POSIFLEX

POSIFLEX TM-7117E User manual

POSIFLEX

POSIFLEX XP-3000 Series User manual

POSIFLEX

POSIFLEX KS - 7210 series User manual

POSIFLEX

POSIFLEX PS-3415 User manual

Popular Touch Terminal manuals by other brands

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced user manual

Ingenico

Ingenico AXIUM EX4000 user guide

Heisei Electronics

Heisei Electronics Q-POS 815 user guide

Amano

Amano MTX-15 installation guide

FLOWBIRD

FLOWBIRD CWT Compact Touch manual

Demco

Demco SP7 installation guide

Lathem

Lathem PC600 Series user guide

Partner

Partner MF-2352 user manual

NCR

NCR RealPOS 7460-2 supplementary guide

Simrad

Simrad MS50 Manual guide

Unitech

Unitech MR350 MKII Software guide

Jungheinrich

Jungheinrich WMT 210 Service manual

Motorola

Motorola MTP850 user guide

YASKAWA

YASKAWA 62H-MDC0 manual

MVG industries

MVG industries NeptuLink user manual

Price Industries Limited

Price Industries Limited FDC Installation, operation & maintenance manual

Honeywell

Honeywell TemaKey installation manual

EBN

EBN BPC65-B-A16G user manual