Polycom VSX 8000 Series User manual

Quick Setup for the

Polycom Mobile Responder

Polycom® and the Polycom logo are registered trademarks and

Mobile Responder

™

and VSX

™

are trademarks of Polycom, Inc.

1725-23337-001/A

The Polycom® Mobile Responder™ is a complete video

conferencing system packaged in a portable case. Based

on Polycom’s VSX™ 8000 system, the Mobile Responder

includes a built-in display, camera, microphone, and IP

network interface.

17” display Speaker Camera IR receiver

Connection panel Accessory compartment Microphone

The Mobile Responder weighs 39 pounds (18 kg). You

should get help lifting it if you cannot carry this much weight.

The Mobile Responder complies with FAA carry-on luggage

regulations for overhead storage. Although it is built to

withstand the rigors of travel, you should handle the Mobile

Responder as you would handle a laptop. For example,

when using it, place it on a secure, flat surface.

IR activity

indicator

Side

panel

Note

Connecting Equipment to the Connection Panel

The equipment shown in the illustration below is optional. You

can also add an optional ISDN/V.35 network interface card to

the Mobile Responder as described in the User’s Guide for

the Polycom Mobile Responder. For more information about

purchasing optional components, contact your Polycom

distibutor.

LAN

111

VGA VGA

Line

Out

Mic

Audio InAudio In

2668-23206-ENG

LAN

VSX

To connect the power cord:

For complete information about how to use the VSX 8000 to

place calls and perform other video conferencing tasks, refer

to the VSX 8000 series documentation. For more information

about the Mobile Responder, refer to the User’s Guide for the

Polycom Mobile Responder. These documents are available

on the CDs that you received with your Mobile Responder or

at www.polycom.com/videodocumentation.

1. Open the panel on the side of the Mobile Responder by

2. Make sure you have the appropriate power cord for your

3. Connect the other end of the power cord to a wall outlet.

The system can accept AC voltages between 98 and 250 VAC.

To power on the Mobile Responder:

1. Press the power button located inside the side panel to

the ON position.

2. Wait one to two minutes for the system to completely

power on.

When the system is powered on, the VSX 8000 home screen

appears on the display.

pressing down on the latch.

country, and connect one end of the cord to the power

connector inside the side panel.

Powering on the Mobile Responder

Performing Video Conferencing Tasks

Other manuals for VSX 8000 Series

This manual suits for next models

Table of contents

Other Polycom Conference System manuals

Polycom

Polycom VSX 7000e Series User manual

Polycom

Polycom SoundStructure C16 Manual

Polycom

Polycom SoundStructure C16 Guide

Polycom

Polycom VSX Series User manual

Polycom

Polycom RMX DOC2551A User manual

Polycom

Polycom Real-Time Media Conferencing Platform RMX... User manual

Polycom

Polycom VSX 3000 User manual

Polycom

Polycom RealPresence Trio 8500 User manual

Polycom

Polycom RealPresence Group Series User instructions

Polycom

Polycom CX7000 series User manual

Polycom

Polycom ReadiManager LX 100 User manual

Polycom

Polycom Poly VVX 450 User manual

Polycom

Polycom MGC-100 User manual

Polycom

Polycom V500 User manual

Polycom

Polycom RMX 2000 User manual

Polycom

Polycom Studio User manual

Polycom

Polycom QDX 6000 System User manual

Polycom

Polycom V500 User manual

Polycom

Polycom G7500 User manual

Polycom

Polycom RealPresence Experience RPX HD User manual

Polycom

Polycom ViewStation FX4000 User manual

Polycom

Polycom SoundStructure C16 Guide

Polycom

Polycom QSX 300 User manual

Polycom

Polycom VS4000 User instructions

Popular Conference System manuals by other brands

Kramer

Kramer VIA GO quick start guide

AVT

AVT MAGIC AC1 Go Configuration guide

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO user manual

Sony

Sony PCS-I150 Operation guide

Middle Atlantic Products

Middle Atlantic Products VTC Series instruction sheet

Prentke Romich Company

Prentke Romich Company Vanguard Plus Setting up and using

Speakerbus

Speakerbus iD 712 user guide

Trelleborg

Trelleborg SafePilot CAT PRO user guide

Sennheiser

Sennheiser ADN instruction manual

ADTRAN

ADTRAN NetVanta 7100 Configuration guide

AINA

AINA PTT Voice Responder quick guide

Yamaha

Yamaha ProjectPhone PJP-100H owner's manual

vissonic

vissonic VLI Series user manual

Panasonic

Panasonic KX-VC500 user manual

Poly

Poly Trio 8300 user guide

Crestron

Crestron Mercury CCS-UCA-SMK Do guide

Inmarsat

Inmarsat mini M manual

Tenveo

Tenveo ALL-IN-ONE manual