EN
5
1.1.1 Record cong
Go to Main menu - Record - Record cong (Record setup)
Set recording parameters on each channel or all channels at the same time. The system is set to
start recording 24 hours continuously.
Note: The HDD must be set to read / write mode.
Channel: Choose the channel number for which you want to set up the recording. Choose All to
make settings for all channels at the same time.
Redundancy: The function is not active for this model
Length: Set the length of each recording le (in minutes). The default is 60 minutes.
Pre-Record: Recorded between 1 and 30 seconds before an alarm event
Mode: Set the recording type: programmed, manually, or o.
• Scheduled recording: You can choose 4 recording times (between 0:00 and 24:00 hours)
and 3 modes (normal recording, motion detection and alarm):
• Regular (normal recording): The device records in the set time. The video le type is ”R”.
• Detect: The device detects motion detection. Video le type is ”M”.
• Alarm: The alarm recording function includes: Motion detection, lack of image, loss of video
signal.
• Manual recording: Click the button and the corresponding channel will record regardless of
the current status.
• Stop: Click the button and the corresponding channel will stop recording regardless of the
current status.
Note: The Advanced button opens the following menu: Up Window, Show desktop, Copy, Paste,
Default, Restore the Storage, configuration of the storage unit).
1.1.2 Playback
There are two ways you can play the recorded les on the internal HDD:
- Right click on the screen - Playback
- Right-click on the screen - Main Menu - Record - Playback
