Planet XGS-6320-8X8TR User manual
L3 Multi-port 10Gigabit Managed Ethernet Switch
XGS-6320-8X8TR/XGS-6320-12X4TR
Quick Installation Guide
Table of Contents
1. Package Contents ....................................................................................... 3
2. Requirements ............................................................................................. 4
3. Terminal Setup ........................................................................................... 5
3.1 Logging on to Console ......................................................................... 6
3.2 ConguringIPAddress......................................................................... 7
3.3 StoringCurrentSwitchConguration..................................................... 9
4. Starting Web Management .........................................................................10
4.1 LoggingintotheManagedSwitch .......................................................10
4.2 SavingConguration...........................................................................13
5. RecoveringBacktoDefaultConguration.....................................................14
6. Customer Support .....................................................................................15
3
1. Package Contents
Thank you for purchasing PLANET Multi-port 10Gigabit Managed Ethernet Switch,
XGS-6320-8X8TR/XGS-6320-12X4TR. The descriptions of these models are shown
below:
XGS-6320-8X8TR L38-Port10GBASE-XSFP++8-Port10GBASE-TManaged
EthernetSwitch
XGS-6320-12X4TR L312-Port10GBASE-XSFP++4-Port10GBASE-TManaged
EthernetSwitch
“ManagedSwitch”isusedasanalternativenameinthisQuickInstallationGuide.
Open the box of the Managed Switch and carefully unpack it. The box should
contain the following items:
L3ManagedSwitchx1 QuickInstallationGuidex1 Rack-mountingKits
SFPDust Capsx12or8 DB9 to RS232 Cable x 1 ACPowerCordx1
If any item is found missing or damaged, please contact your local reseller for
replacement.
4
2. Requirements
zWorkstations running Windows 10/10/XP/2003/Vista/7/8/2008, MAC OS X or
later,Linux,UNIX,orotherplatformsarecompatiblewithTCP/IPprotocols.
zWorkstationsareinstalledwithEthernet NIC(NetworkInterfaceCard).
zSerial Port Connection(Terminal)
The above Workstations come with COM Port (DB9) or USB-to-RS232
converter.
TheaboveWorkstationshavebeeninstalledwith terminal emulator,suchas
TeraTerm,PuTTYorHyperTerminalincludedinWindowsXP/2003.
Serial cable -- one end is attached to the RS232 serial port, while the other
endtotheconsoleportoftheManagedSwitch.
zEthernet Port Connection
Networkcables--Usestandardnetwork(UTP)cableswithRJ45connectors.
TheabovePCisinstalledwithWebbrowser.
Note
It is recommended to use Chrome 98.0.xxx or above to access the
ManagedSwitch. Ifthe Web interface of the ManagedSwitch isnot
accessible, please turn off the anti-virus software or firewall and
then try it again.
5
3. Terminal Setup
To congure the system, connect a serial cable to a COM port on a PC or
notebookcomputerandtoRJ45typeofserialportoftheManagedSwitch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 3-1: Managed Switch Console Connectivity
A terminal program is required to make the software connection to the Managed
Switch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
zSpeed:115200
zData:8bit
zParity:None
zStop bits: 1 bit
zFlowcontrol:None
Figure 3-2: COM Port Conguration
6
3.1 Logging on to Console
Once the terminal is connected to the device, power on the Managed Switch, and
the terminal will display “running testing procedures”. Then, the following message
asks to log in user name and password. The factory default user name and
passwordareshownasfollowsandtheloginscreeninFigure3-3appears.
Username:admin
Password:admin
Note
Thefollowing consolescreen based on the XGS-6320-8X8TRwill be
thesameasthatoftheXGS-6320-12X4TR.
Figure 3-3: Managed Switch Console Login Screen
The user can now enter commands to manage the Managed Switch. For a detailed
descriptionofthecommands,pleaserefertothefollowingchapters.
Note
1. For security reason, please change and memorize the new pass-
wordafterthisfirstsetup.
2.Only accept command in lowercase letter under console inter-
face.
7
3.2 ConguringIPAddress
TheManagedSwitchisshippedwithdefaultIPaddressshownbelow.
IPAddress:192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
usetheproceduresasfollows:
Show the current IP Address
1.Atthe“#”prompt,enter“show ip interface brief”.
2.ThescreendisplaysthecurrentIPaddressasshowninFigure3-4.
Figure 3-4: IP Information Screen
8
Conguring IP Address
3.At the “#” prompt, enter the following command and press <Enter> as shown
inFigure3-5.
XGS-6320-8X8TR#congure terminal
XGS-6320-8X8TR(cong)#interface vlan 1
XGS-6320-8X8TR(cong-if-vlan)#ip address 192.168.1.100 255.255.255.0
ThepreviouscommandwouldapplythefollowingsettingsfortheManagedSwitch.
IPAddress: 192.168.1.100
Subnet Mask: 255.255.255.0
Figure 3-5: Conguring IP Address Screen
4.Repeatstep1tocheckiftheIPaddresshaschanged.
If the IP is successfully congured, the Managed Switch will apply the new IP
address setting immediately. You can access the Web interface of the Managed
SwitchthroughthenewIPaddress.
9
3.3 StoringCurrentSwitchConguration
In the Managed Switch, the running conguration sequence running-cong can
be saved from the RAM to FLASH by “copy” command, so that the running
conguration sequence becomes the start-up conguration le, which is called
congurationsave.
Atthe“#”prompt,enterthefollowingcommandandpress<Enter>.
# copy running-cong startup-cong
Figure 3-6: Saving Current Conguration Command Screen
Note
If you are not familiar with the console command or the related
parameter, enter “help” anytime in console to get the help
description.
10
4. Starting Web Management
The following shows how to start up the Web Management of the Managed
Switch. Note the Managed Switch is congured through an Ethernet connection.
Please make sure the manager PC must be set to the same IP subnet address.
Forexample, thedefaultIPaddress oftheManagedSwitchis 192.168.0.100,then
the manager PC should be set to 192.168.0.x (where x is a number between 1
and254,except100),andthedefaultsubnetmaskis255.255.255.0.
PC / Workstation
with Web Browser
192.168.0.x
Managed Switch
RJ45/UTP Cable
IP Address: 192.168.0.100
Figure 4-1: IP Management Diagram
4.1 Logging in to the Managed Switch
1.Use Internet Explorer 8.0 or above Web browser and enter IP address
https://192.168.0.100 (the factory default IP address or the one that you
havejustchangedinconsole)toaccesstheWebinterface.
2.When the following dialog box appears, please enter the default user name and
password “admin” (or the password you have changed via console). The login
screeninFigure4-2appears.
DefaultIPAddress:192.168.0.100
DefaultUsername:admin
DefaultPassword:admin
Figure 4-2: Login Screen
This manual suits for next models
1
Table of contents
Other Planet Switch manuals
Planet
Planet WGSW-52040 User manual
Planet
Planet NOVASwitch GSW-800S User manual
Planet
Planet HPOE-1200G User manual
Planet
Planet GSD-800 User manual
Planet
Planet MGSW-004-12F User manual
Planet
Planet WGSW-24040 User manual
Planet
Planet SGSW-4802 User manual
Planet
Planet ISW-1022MT User manual
Planet
Planet FGSD-1008HPS User manual
Planet
Planet SW-502 User manual
Planet
Planet GSD-802S User manual
Planet
Planet WGSW-20160HP User manual
Planet
Planet WGSW-20160HP User manual
Planet
Planet FSD-504HP User manual
Planet
Planet WGS-804HPT User manual
Planet
Planet GSW-4804SF User manual
Planet
Planet IAP-2000PE User manual
Planet
Planet FSD-5816 User manual
Planet
Planet EPL-2000 User manual
Planet
Planet EMQ-SGS-5240 Series User manual
