Planet ENW-9605 User manual

Table of contents

Popular Adapter manuals by other brands

PCB Piezotronics

PCB Piezotronics 090B274 Installation and operating manual

Auvidea

Auvidea J20 Technical reference manual

Gossen MetraWatt

Gossen MetraWatt AT3-III E operating instructions

Akribis

Akribis ITF-21-BISS-MIT user manual

Tenda

Tenda W54U user guide

ROHO

ROHO AGILITY Operation manual

PROLiNK

PROLiNK WN2001 Quick installation guide

Hawking

Hawking HUF2 Specifications

Airlink101

Airlink101 AWLC4030 user manual

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter user manual

Philips

Philips SWA4554S/10 user manual

JVC

JVC TS-C9D2B Assembly and installation instructions

NETGEAR

NETGEAR A6100 quick start

D-Link

D-Link DWA-121 Quick install guide

Philips

Philips SWA2037 Specifications

Basalte

Basalte 0610-20 installation manual

Yealink

Yealink EHS40 user guide

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A installation guide

– 1 – – 2 – – 3 –

PCI Gigabit Ethernet Adapter

Quick Installation Guide

Version 1.0

Thank you for purchasing PLANET PCI Gigabit Ethernet

adapter. It is a 10/100/1000Mbps Ethernet adapter for

PCI local bus-compliant PCs. Supports bus mastering

architecture and Auto-Negotiation for 10/100/1000Mbps

Ethernet connection. Provides a highly cost-effective

solution to upgrading to the Gigabit network with your

existing Ethernet infrastructures.

1. Package Content

PCI Gigabit Ethernet Adapter x 1

Quick Installation Guide x 1

CD Disk x 1

2. Hardware Installation

Step 1: Turn off the power of the PC.

Step 2: Remove any metal decorations from your

hands and wrists.

Step 3: Remove the cover from your PC.

Step 4: Locate an empty, non-shared bus mastering

PCI slot and remove the corresponding back

plate. Save the screw for use in Step 6.

Step 5: Carefully insert the PCI Gigabit Ethernet

Adapter into the chosen slot and press rmly

with proper push to ensure it is fully seated in

the slot.

Step 6: Secure the PCI Gigabit Ethernet Adapter with

the screw you saved in step 4.

Step 7: Replace the PC cover.

Step 8: Power on your PC and refer to next section to

install driver.

Note

Please do not install the PCI Gigabit

Ethernet adapter in a shared PCI slot.

Avoid any PCI slot next to an ISA slot

because this is often a shared slot

and does not support bus mastering.

Please refer to the user’s manual of the

motherboard for the information.

3. Installation on Windows XP

1. After installing Gigabit Ethernet Adapter to your PC

and boot up, Windows XP will detect it and ask you

to install driver. Please select the second option and

click “Next”.

2. Insert the bundled CD into the CD-ROM drive.

3. Please select “Include this location in the search” and

then click “Browse” to nd out the suitable driver

from the E:\Driver folder to install. (Assume “E” is

your CD-ROM). Click “Next” to continue.

4. WinXP will show this dialog box to prompt you the

driver has not passed Windows logo testing, please

click “Continue Anyway”, then WinXP will start to

install the driver.

5. Click “Finish” to complete the driver installation.

2011-A14020-001

– 4 – – 5 – – 6 –