Pisector GSM-06 User manual

PiSector All in ONE

Wireless GSM Alarm System

User Manual (GSM-06)

Read manual ully be ore use.

PiSector Inc., USA, www.pisector.com

INTRODUCTION .......................................................................... 5

SYSTEM INITIALIZATION ........................................................... 9

SYSTEM SETTING INSTRUCTIONS ........................................ 10

3.1.

NTERING

ETTING

ODE

..................................................... 10

3.2.

DDING

EMOTE

ONTROLLER

.............................................. 11

3.3.

ELETING

EMOTE

ONTROLLER

........................................... 13

3.4.

ENSORS TO MAIN PANEL

................................................ 14

3.5.

NSTALLATION OF

OOR

ENSORS

.......................................... 16

3.6.

NSTALLATION OF

IRELESS

PIR

OTION

ENSORS

................. 18

3.7.

ELETING

EFENSE

ONE

..................................................... 21

3.8.

ETTING

EFENSE

ONE

LACES

........................................... 22

3.9.

ETTING

EFENSE

ONE

ODES

........................................... 23

3.10.

ETTING

EFENSE

ONE

IREN

............................................. 24

3.11.

LARM

ELAY

ETTING

......................................................... 25

3.12.

DDING

HONE

MBER

....................................................... 26

3.13.

ELETING

HONE

MBER

.................................................... 27

3.14.

DDING

SMS

ELL

HONE

MBER

...................................... 28

3.15.

ELETING

SMS

ELL

HONE

MBER

................................... 29

3.16.

ORK

ENTER

NCTION

........................................ 30

3.17.

OICE

ECORDING

............................................................... 32

3.18.

OICE

ECORDING

EPLAY

................................................... 33

3.19.

ETTING

YSTEM

ATE

......................................................... 34

3.20.

ETTING

YSTEM

IME

.......................................................... 35

3.21.

CHED LING

IMELY

...................................................... 36

3.22.

CHED LING

IMELY

ISARM

................................................. 37

3.23.

IRELESS

IREN

ODING

...................................................... 38

3.24.

IRELESS

IREN

ODE

NCRYPTION

..................................... 39

3.25.

HANGE

PERATION

ASSWORD

............................................ 42

3.26.

HANGE

ROGRAM

ASSWORD

.............................................. 43

3.27.

ETTING

ELAY

IME

..................................................... 44

3.28.

ETTING

LARM

ALL

)

ELAY

IME

................................ 45

3.29.

OICE

ROMPT

ETTING

....................................................... 46

3.30.

IREN

ROMPT

ETTING FOR

EMOTE

ONTROLLER

............... 47

3.31.

ACKLIGHT

ETTING

............................................................. 48

3.32.

IREN

ETTING IN

“E

MERGENCY

”

ODE

.................................. 49

3.33.

ISARM

SMS

OTIFICATION

......................................... 50

3.34.

ANG AGE

ETTING

.............................................................. 51

3.35.

ING

IMES

EFORE

NSWERING

............................. 52

3.36.

HOICE

ODE OF

LARM

ETWORK

....................................... 53

3.37.

ACTORY

ESET

................................................................... 54

3.38.

ASSWORD

ESET

................................................................ 55

SYSTEM USAGE INSTRUCTIONS ........................................... 56

4.1.

............................................................................. 56

4.2.

OME

........................................................................... 57

4.3.

ISARM

................................................................................ 57

4.4.

NSWER

LARM

ALL

........................................................... 58

4.5.

EMOTE

ONTROL

................................................................ 59

4.6.

MERGENCY

LARM

ALL

...................................................... 60

4.7.

SE AS

ELEPHONE

.............................................................. 60

4.8.

LARM

ISTORY

EVIEW

....................................................... 61

TECHNICAL SPECIFICATIONS ................................................ 62

CARE AND MAINTENANCE ..................................................... 63

Main Features

 Quad-band worldwide cellular phone (900/1800/850/1900 MHz).

 Elegant touch keypad with easy to use detailed menu system.

 128×64 lattice LCD screen with clock display (English/Chinese)

 4 wired and 10 wireless (433MHz) defense zones; each wireless

zone supports up to 10 sensors.

 Support for up to 8 remote controllers.

 Built-in loud speaker and intelligent voice announcer.

 Auto-play 10-second pre-recorded voice message on alarm

(useful for giving address/GPS position to emergency services).

 p to 6 phone numbers to dial out on alarm.

 p to 3 SMS numbers: to send SMS to when alarm.

 Remote control by phone to arm, disarm, or intercom (listen-in).

 One-touch control: ARM (out arm), STAY (home arm) via touch

keypad or arm and disarm via remote controller or telephone.

 4 Arm Modes: out arm, home arm, delay arm and timely arm for

scheduling arm / disarm times).

 8 Defense Zone Places: SOS, fire, gas, door, hall, window,

balcony, and boundary.

 4 Arm Delay Modes: Real-time (immediate), 01-99 second delay,

24 hours (always-armed even if system disarmed), Disable

 Alarm calls have priority over all other calls if the device is busy.

 Direct wireless coding of any additional wireless accessories.

 Alarm History to store the last 30 alarm records.

 Arm via the main unit panel, remote controller, or remote call by

phone.

 SMS alert of power failure and recovery.

 Built-in Lithium-Ion battery with automatic recharge.

1. Introduction

Install battery to all door sensors

Open the cover and remove the insulated paper then close the cover.

Put small magnet next to sensor

Install battery to IR motion sensor

Install batteries and keep them switched off.

Know Your System

1. LCD Screen: Resolution: 128×64; English and Chinese display.

2. LED Status Indicators

POWER: power and system activity indicator:

- fast flashing once per second: system is searching for GSM signal.

- slow flashing once per 3 seconds: system is in ready mode.

SET: is ON when the system enters setting mode.

SIGNAL: wireless signal indicator (used by wireless sensors).

ALARM: is ON if any sensor triggers or sets off an alarm.

3. Touch Keypad: Resistive Touch Panel requires gentle key pressing.

Do not press the keypad heavily as this may reduce its sensitivity.

ARM: press to enter O T ARM status (gives you 40 seconds to

leave home before system is armed).

STAY: press to enter HOME ARM status (deactivates all sensors

with Home defense zone mode and activates all other sensors).

CALL: For making phone calls. Enter the number you want to call,

and then press this CALL button. Press again to end call (hang up).

SOS: press to raise an emergency alarm.

ESC: clears the input content or back to last operation.

ENTER: confirms current command or operation.

4. Wired Port - Function inter ace o the main unit

T_VCC

External keyboard power supply 12V

2 T_GND Ground External keyboard

Connecting external keyboard A

Connecting external keyboard B

5 GND Ground

6 Zone 1 Wired sensor 1: support both NO and NC

GND

Ground

8 Zone 2 Wired sensor 2: support both NO and NC

GND

Ground

10 Zone 3 Wired sensor 3: support both NO and NC

GND

Ground

12 Zone 4 Wired sensor 4: support both NO and NC

GND

Ground

14 G_ANT External antenna Ground

15 ANT External antenna

5. Internal Backup Battery Switch.

6. Power port for 12V 1.2AM adapter plug in

7. SP: Siren in for plug a external siren or wireless siren transmitter

8. Tel: Your exist telephone device connector port

LINE: Main telephone line connector jack

9. SIM Card Slot: Please pay attention to the direction arrow marked

on the slot: “LOCK” / “OPEN”. Do not insert or take out the SIM card

when the main unit panel is powered on.

2. System Initialization

Correct initialization of the main unit panel is important to its normal

working and lifespan.

1. Connect the wired accessories that you need.

2. Insert the SIM card.(NEVER insert SIM card during power on)

3. Connect the power adapter. The main unit panel will start

self-inspection and the POWER indicator LED will flash once per

second. If this LED does not light on, you need to restart the main

unit panel. Please do it at least 10 seconds later as repeated power

on and off in short times will shorten the service life of the system.

4. The POWER indicator will flash once every 3 seconds after finding

GSM network successfully. This is the normal system state.

5. Turn on the internal backup battery switch on the back of the main

unit panel.

6. Check the GSM signal icon on the LCD screen. Signal less than 3

bars will affect normal performance. Please place the main unit

panel at a place with good GSM signal reception.

3. System Setting Instructions

3.1. Entering Setting Mode

All settings have to be done in the setting mode.

se keys 2 / 8 / 4 / 6 as direction keys (up / down / left / right).

At the disarm state, input your 6-digit password (default: 888888), then

press ENTER. The main unit panel will sound a beep and the SET

indicator lights on. The screen will display Remote Control menu.

Fig 1: disarm status

Fig 2: please enter password

Fig 3: press ENTE to set

Table of contents

Other Pisector Security System manuals

Pisector

Pisector GS08 User manual

Pisector

Pisector Motion sensor User manual

Pisector

Pisector PS03 User manual

Pisector

Pisector GS08 User manual

Pisector

Pisector GSM-01 User manual

Pisector

Pisector GSM-03 User manual

Pisector

Pisector GSM-01 User manual

Pisector

Pisector GS08 User manual

Pisector

Pisector P09 series User manual

Pisector

Pisector PS03 User manual

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual