PEERLESS LCT Series Guide

Max Load Capacity: 25 lbs (11kg)

3215 W. North Ave. • Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com

ISSUED: 05-25-05 SHEET #: 090-9104-4 02-24-06

Installation and Assembly:

LCT Series LCD Arm

Model: LCT-102, LCT-103, LCT-104, LCT-102-KIT

Note: Read entire instruction sheet before you start installation and assembly.

• Donot begin toinstall your Peerlessproduct until youhave read andunderstood the instructionsand warnings

contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please

callPeerlesscustomer service at 1-800-729-0307.

• Make sure that the desk will safely support the combined load of the equipment and all attached hardware and

components.

• Neverexceed theMaximum Load Capacityof25 lb (11kg).

• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

• Tighten screwsfirmly,butdo not overtighten.Overtighteningcandamage the items,greatlyreducing their holding

power.

• Special precaution on the overall balancing of the arm assembly must be taken when adjusting the swing angle of the

crosswings. (Please refer to section IV -Adjustment Details.)

• During the installation, beware of the arm body recoil when attaching or detaching the LCD monitor to the LCDArm.

When changing LCD panels in the LCDArm, please always re-adjust the gas strut to a lowest force level to control

the recoil of the arm body.The LCD arm gas strut has been adjusted with the reserved force to load the original LCD

panel, and the LCDArm body will be recoiled when detaching the LCD panel directly without adjusting the gas strut.

• Do not attempt to disassemble, service or modify the product yourself.

• Use only a slightly damp cloth to clean theArm surface. Never use flammable solvents like alcohol, beneze, thinner,

etc.

WARNING

Forcustomer care call(800)729-0307 or (708)865-8870.

2 of 13 ISSUED: 05-25-05 SHEET #: 090-9104-4 02-24-06

Type 1 - Desk Clamp

(ACC 916 - Sold Separately)

3 of 13 ISSUED: 05-25-05 SHEET #: 090-9104-4 02-24-06

Type 2 - Desk Bolt

(ACC 915 - Sold Separately)

4 of 13 ISSUED: 05-25-05 SHEET #: 090-9104-4 02-24-06

Type 3 - Desk Stand

(ACC 917 - Sold Separately)

FRONTOFSTAND

NOTE: Screensshould be balancedand face the

frontof thestand

5 of 13 ISSUED: 05-25-05 SHEET #: 090-9104-4 02-24-06

6 of 13 ISSUED: 05-25-05 SHEET #: 090-9104-4 02-24-06

7 of 13 ISSUED: 05-25-05 SHEET #: 090-9104-4 02-24-06

8 of 13 ISSUED: 05-25-05 SHEET #: 090-9104-4 02-24-06

9 of 13 ISSUED: 05-25-05 SHEET #: 090-9104-4 02-24-06

10 of 13 ISSUED: 05-25-05 SHEET #: 090-9104-4 02-24-06

Other manuals for LCT Series

This manual suits for next models

Other PEERLESS Rack & Stand manuals

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 