Paradyne Hotwire 8775 User manual

Hotwire®TDM SDSL

Termination Units

Models 8775 and 8785

User’s Guide

Document No. 8700-A2-GB25-10

February 2001

AFebruary 2001 8700-A2-GB25-10

Printed in U.S.A.

Notice

This publication is protected by federal copyright law. No part of this publication may be copied or distributed,

transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language in any form or

by any means, electronic, mechanical, magnetic, manual or otherwise, or disclosed to third parties without the express

written permission of Paradyne Corporation, 8545 126th Ave. N., Largo, FL 33773.

Paradyne Corporation makes no representation or warranties with respect to the contents hereof and specifically

disclaims any implied warranties of merchantability or fitness for a particular purpose. Further, Paradyne Corporation

reserves the right to revise this publication and to make changes from time to time in the contents hereof without

obligation of Paradyne Corporation to notify any person of such revision or changes.

Changes and enhancements to the product and to the information herein will be documented and issued as a new

release to this manual.

Warranty, Sales, Service, and Training Information

Contact your local sales representative, service representative, or distributor directly for any help needed. For additional

information concerning warranty, sales, service, repair, installation, documentation, training, distributor locations, or

Paradyne worldwide office locations, use one of the following methods:



Internet: Visit the Paradyne World Wide Web site at www.paradyne.com. (Be sure to register your warranty

at www.paradyne.com/warranty.)



Telephone: Call our automated system to receive current information by fax or to speak with a company

representative.

—Within the U.S.A., call 1-800-870-2221

—Outside the U.S.A., call 1-727-530-2340

Document Feedback

We welcome your comments and suggestions about this document. Please mail them to Technical Publications,

Paradyne Corporation, 8545 126th Ave. N., Largo, FL 33773, or send e-mail to userdoc@paradyne.com. Include the

number and title of this document in your correspondence. Please include your name and phone number if you are

willing to provide additional clarification.

Trademarks

ACCULINK, COMSPHERE, FrameSaver, Hotwire, MVL, NextEDGE, OpenLane, and Performance Wizard are

registered trademarks of Paradyne Corporation. ReachDSL and TruePut are trademarks of Paradyne Corporation. All

other products and services mentioned herein are the trademarks, service marks, registered trademarks, or registered

service marks of their respective owners.

Regulatory and Safety Information

Refer to the appropriate Digital Subscriber Line Access Multiplexer (DSLAM) manual for all regulatory notices and

safety information.

8700-A2-GB25-10 February 2001 i

Contents

About This Guide



Document Purpose and Intended Audience . . . . . . . . . . . . . . . . . . . . v



Document Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v



Product-Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

1 About Hotwire 8775 and 8785 Termination Units



TDM SDSL Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1



Hotwire 8775 and 8785 Termination Unit Features . . . . . . . . . . . . . . . 1-2



Network Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3



SNMP Management Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Management Information Base (MIB) Support . . . . . . . . . . . . . . . 1-4

SNMP Trap Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

2 Using the Asynchronous Terminal Interface



User Interface Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1



Management Serial Port Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1



Logging In to the Hotwire DSLAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2



Initiating an ATI Session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2



Menu Hierarchy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4



Screen Work Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5



Navigating the Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Keyboard Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

Switching Between Screen Areas . . . . . . . . . . . . . . . . . . . . . . . . . 2-8



Ending an ATI Session. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9



Exiting From the DSLAM Session . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

Contents

ii February 2001 8700-A2-GB25-10

3 Initial Startup and Configuration



Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1



Entering Identity Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2



Configuring the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Current and Default Factory Configurations . . . . . . . . . . . . . . . . . 3-4

Configuration Loader. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5



Saving Configuration Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7



Downloading Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8



AutoRate Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10

Disabling AutoRate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10

Resetting AutoRate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11



Restoring Access to the User Interface . . . . . . . . . . . . . . . . . . . . . . . . 3-12



Resetting the Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

4 Monitoring the Unit



What to Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1



Viewing System and Test Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Health and Status Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Self-Test Results Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Test Status Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5



Performance Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Viewing Network Error Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Viewing Network Performance Statistics. . . . . . . . . . . . . . . . . . . . 4-8

Viewing Current Network Performance . . . . . . . . . . . . . . . . . . . . . 4-10



Viewing LED Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11



Front Panel LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12

5Testing



Accessing the Test Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1



Running Network Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Line Loopback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Repeater Loopback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

Remote Send Line Loopback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Send and Monitor 511 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6



Running SYNC Data Port Tests. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

Data Terminal Loopback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

Data Channel Loopback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9

Send Remote Data Channel Loopback. . . . . . . . . . . . . . . . . . . . . 5-10

Contents

8700-A2-GB25-10 February 2001 iii



Device Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11

Lamp Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11



Ending an Active Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12

6 Messages and Troubleshooting



Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1



Configuring SNMP Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2



Device Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3



Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5

7 Security



Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1



ATI Access Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1



Creating a Login. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2



Deleting a Login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3



Controlling SNMP Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4

Assigning SNMP Community Names and Access Types . . . . . . . 7-4

Limiting SNMP Access through the IP Addresses of

the Managers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4

8 IP Addressing



Selecting an IP Addressing Scheme . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

Configurations Not Running IP Conservative Software. . . . . . . . . 8-1

All Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1



IP Addressing Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

A Configuration Options



Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1



Network Interface Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2



Synchronous Data Port Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4



Copy Ports Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-7



System Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8



Management and Communication Menu . . . . . . . . . . . . . . . . . . . . . . . A-9

Telnet Session Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-9

General SNMP Management Options. . . . . . . . . . . . . . . . . . . . . . A-11

SNMP NMS Security Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-12

SNMP Trap Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-13

Contents

iv February 2001 8700-A2-GB25-10

B Standards Compliance for SNMP Traps



SNMP Traps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

warmStart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

authenticationFailure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

linkUp and linkDown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2



Enterprise-Specific Traps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3

C Cables and Pin Assignments



Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1



50-Pin Telco Connector Pinouts for Model 8775 in a

Hotwire 8600 DSLAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2



50-Pin Telco Connector Pinouts for Model 8775 in a

Hotwire 8610 DSLAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-3



50-Pin Telco Connector Pinouts for Model 8775 in a

Hotwire 8800 or 8810 DSLAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-4



50-Pin Telco Connector Pinouts for Model 8775 in a

Hotwire 8820 DSLAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-5



50-Pin Telco Connector Pinouts for Model 8785 in a

Hotwire 8610 DSLAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-6



50-Pin Telco Connector Pinouts for Model 8785 in a

Hotwire 8810 or 8820 DSLAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-7



100-Pin Plug-to-Four DB25 Receptacle EIA-530-A Cable. . . . . . . . . . C-8



100-Pin Plug-to-Four MS34 Receptacle V.35 Cable . . . . . . . . . . . . . . C-12



100-Pin Plug-to-Four DB37 Receptacle RS-449 Cable . . . . . . . . . . . . C-16



100-Pin Plug-to-Four DB15 Receptacle X.21 Cable . . . . . . . . . . . . . . C-20



100-Pin Plug-to-Four DB25 Receptacle EIA-530-A Crossover Cable . C-23



100-Pin Plug-to-Four MS34 Receptacle V.35 Crossover Cable . . . . . C-27

D Technical Specifications

Glossary

Index

8700-A2-GB25-10 February 2001 v

About This Guide

Document Purpose and Intended Audience

This guide contains information needed to set up, configure, and operate 4-port

Hotwire 8775 and 8785 Time Division Multiplexer Symmetric Digital Subscriber

Line (TDM SDSL) Termination Units. It is intended for installers and operators.

Document Summary

Section Description

Chapter 1,

About Hotwire 8775

and 8785 Termination Units

Describes the features and capabilities of the unit.

Chapter 2,

Using the

Asynchronous Terminal Interface

Provides instructions for accessing the user interface

and navigating the screens.

Chapter 3,

Initial Startup and

Configuration

Provides procedures for setting up the user interface

and configuring the unit.

Chapter 4,

Monitoring the Unit

Describes using the LEDs, status, and network

statistics to monitor the unit.

Chapter 5,

Testing

Provides information about available tests and test

setup.

Chapter 6,

Messages and

Troubleshooting

Provides information on SNMP traps, device

messages, and troubleshooting.

Chapter 7,

Security

Presents procedures for creating a login, setting the

effective access levels, and controlling SNMP

access.

Chapter 8,

IP Addressing

Provides information and examples regarding IP

addresses.

Appendix A,

Configuration

Options

Contains all configuration options, default settings,

and possible settings.

Appendix B,

Standards

Compliance for SNMP Traps

Contains SNMP trap compliance information.

Appendix C,

Cables and Pin

Assignments

Contains connector and interface information.

About This Guide

vi February 2001 8700-A2-GB25-10

Product-Related Documents

Contact your sales or service representative to order additional product

documentation.

Paradyne documents are also available on the World Wide Web at

www.paradyne.com. Select

Library

→

Technical Manuals.

Appendix D,

Technical

Specifications

Contains physical and regulatory specifications,

network and port interfaces, power consumption

values, and accessory part numbers.

Glossary

Defines acronyms and terms used in this document.

Index

Lists key terms, acronyms, concepts, and sections in

alphabetical order.

Section Description

Document Number Document Title

7970-A2-GB20

Hotwire TDM SDSL Standalone Termination Units,

Models 7974, 7975, 7976, 7984, 7985, and 7986,

User’sGuide

8000-A2-GB22

Hotwire Management Communications Controller (MCC)

Card, IP Conservative, User’s Guide

8000-A2-GB29

Hotwire Management Communications Controller (MCC)

Card User’s Guide

8610-A2-GN10

Hotwire 8610 DSLAM Installation Instructions

8620-A2-GN20

Hotwire 8620 GranDSLAM Installation Guide

8700-A2-GN15

Hotwire TDM SDSL Termination Units,

Models 8775 and 8785, Installation Instructions

8810-A2-GN11

Hotwire 8810 DSLAM Installation Instructions

8820-A2-GN20

Hotwire 8820 GranDSLAM Installation Guide

8700-A2-GB25-10 February 2001 1-1

About Hotwire 8775 and 8785

Termination Units

TDM SDSL Overview

Hotwire®Time Division Multiplexer Symmetric Digital Subscriber Line (TDM

SDSL) products maximize customer service areas by varying the DSL line rate.

This ensures symmetric DSL connectivity over a wide range of telephone line

distances and transmission line qualities.

Hotwire TDM SDSL products support router, multiplexer and PBX connections

with maximum loop reaches, as shown in Table 1-1, Maximum Loop Reach.

Hotwire 8775 and 8785 Termination Units are equipped with an automatic

configuration capability that reduces the installation process to a simple

plug-and-play mode. Simply connecting the units to the line automatically

configures the customer for the maximum data rate supported by the local loop.

Units can also be configured at fixed line speeds to achieve maximum distances.

Table 1-1. Maximum Loop Reach

Model

Transmission Rate

128 kbps 2.048 Mbps

8775 (over 2-wire loop) 8.8 km (29,000 ft) 4.5 km (14,700 ft)

8785 (over 4-wire loop) 10.7 km (35,000 ft) 6.0 km (19,600 ft)

1. About Hotwire 8775 and 8785 Termination Units

1-2 February 2001 8700-A2-GB25-10

Hotwire 8775 and 8785 Termination Unit Features

A 4-port Hotwire 8775 or 8785 TDM SDSL Termination Unit is a circuit board

mounted in a Hotwire 8600 or 8800 Series Digital Subscriber Line Access

Multiplexer (DSLAM). It is used to transport signals at high speeds over a

twisted-pair connection.

Hotwire 8775 and 8785 Termination Units offer these standard features:



AutoRate Capability. Provides automatic configuration of line speed and data

rate upon connection.



Embedded Operations Channel (EOC). Provides remote management via

SNMP or Telnet session capability over the TDM SDSL network.



Asynchronous Terminal Interface (ATI). Provides a menu-driven

VT100-compatible terminal interface for configuring and managing the unit

locally or remotely by Telnet session.



Local Management. Provides local management using the DSLAM's

management card with a:

—Terminal or PC via the Management Serial port of the DSLAM.

—Network Management System (NMS) via the Management MCC port of

the 8600 Series DSLAM or 10BaseT port of the 8800 Series DSLAM.



Remote Management. Provides remote management:

—Out-of-band, using an external modem through the Management Serial

port of the DSLAM.

—Using SNMP or Telnet through the 10BaseT port or the Internal

Management Channel (IMC).

—Via Telnet over the EOC.



Alarm Indication. Activates front panel LEDs.



Diagnostics. Provides the capability to diagnose device and network

problems and perform tests, including digital loopbacks, pattern tests, and

self-test.



Device and Test Monitoring. Provides the capability of tracking and

evaluating the unit's operation, including health and status, and error-rate

monitoring.

Other manuals for Hotwire 8775

This manual suits for next models

Table of contents

Other Paradyne Network Hardware manuals

Paradyne

Paradyne FrameSaver SLV 9626 User manual

Paradyne

Paradyne COMSPHERE 3610 Operation and maintenance manual

Paradyne

Paradyne MIM-2E1 User manual

Paradyne

Paradyne Hotwire 5446 User manual

Paradyne

Paradyne COMSPHERE 3800PLUS Instruction Manual

Paradyne

Paradyne COMSPHERE 3810 User manual

Paradyne

Paradyne ACCULINK 317x E1 Manual

Paradyne

Paradyne COMSPHERE 3610 Parts list manual

Paradyne

Paradyne Hotwire 5446 User manual

Paradyne

Paradyne DC Power Entry Module 8820-S1-906 User manual

Paradyne

Paradyne 12000E User manual

Paradyne

Paradyne HotWire 7924 User manual

Paradyne

Paradyne Hotwire 5620 RTU User manual

Paradyne

Paradyne COMSPHERE 3610 Manual

Paradyne

Paradyne Hotwire 5216 User manual

Paradyne

Paradyne MIM-10/100 User manual

Paradyne

Paradyne COMSPHERE 3610 User manual

Paradyne

Paradyne FrameSaver NP 64+ User manual

Paradyne

Paradyne ACCULINK 3160 Manual

Paradyne

Paradyne Jetstream CPX-1000 User manual

Paradyne

Paradyne HotWire 7924 User manual

Paradyne

Paradyne BitStorm 2600 IP DSLAM User manual

Paradyne

Paradyne Hotwire 8784 User manual

Paradyne

Paradyne COMSPHERE 3610 User manual

Popular Network Hardware manuals by other brands

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL product manual

B&B Electronics

B&B Electronics ZXT9-IO-222R2 product manual

Yudor

Yudor YDS-16 user manual

D-Link

D-Link ShareCenter DNS-320L datasheet

Samsung

Samsung ES1642dc Hardware user manual

Honeywell Home

Honeywell Home LTEM-PV Installation and setup guide

evertz

evertz 7700 Series manual

D-Link

D-Link ShareCenter DNS-343 Quick installation guide

Asante

Asante AsanteBridge 1012 user guide

FireBrick

FireBrick FB2700 user manual

Audiovox Electronics

Audiovox Electronics ARWH2T user manual

ADC

ADC DSX-1 Operational Procedures Guide

NetComm

NetComm NF2 user guide

Alcatel-Lucent

Alcatel-Lucent 5620 user guide

Dell EMC

Dell EMC XC6420 Series Solution guide

Lanner

Lanner NCA-1020A user manual

Allied Telesis

Allied Telesis AT-TN121-A Specifications

Arista

Arista CCA-ETM-Q12 quick start guide