Panasonic WJND200 - NETWORK DISK RECORDER User manual
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
HDD Viewer
Operating Instructions
Model No. WJ-ND200
2
Limitation of Liability
Disclaimer of Warranty
THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS.
CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS
PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).
IN NO EVENT SHALL MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD. BE LIABLE TO ANY PARTY OR ANY
PERSON,
EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES,
INCLUDING BUT NOT LIMITED TO BELOW:
(1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSE-
QUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;
(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION
OF THE USER;
(3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER;
(4) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYS-
TEM COMBINED BY THE DEVICES OF THIRD PARTY.
(5) ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR ORGANIZATION BEING A PHO-
TOGENIC SUBJECT, DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF THAT SURVEILLANCE-
CAMERA’S PICTURE, INCLUDING SAVED DATA, FOR SOME REASON, BECOMES PUBLIC OR IS USED
FOR THE PURPOSE OTHER THAN SURVEILLANCE
3
Features
The HDD viewer (Hard Disk Drive Viewer) is the software that can play recorded images on the removable hard disk
drive (that is removed from the WJ-ND200 and connected to a PC).
By using this software, playback of recorded images searched using the search filters (such as the time and date fil-
ter), saving and printing of the paused playback image are also available.
When the removable hard disk drive is needed to be checked, the removable hard disk drive can be checked using
this software.
Note:
Refer to the installation guide or the operating instructions (PDF) for how to remove the hard disk drive from the
WJ-ND200.
About copyright and license
This software can be distributed and used only if you agree to the copyright and license agreement of this software.
Distributing, copying, disassembling, reverse compiling, reverse engineering, and also exporting in violation of export
laws of the software provided with this product are expressly prohibited.
MPEG-4 Visual patent portfolio license
This product is licensed under the MPEG-4 Visual patent portfolio license for the personal and non-commercial use
of a consumer for (i) encoding video in compliance with the MPEG-4 Visual Standard ("MPEG-4 Video") and/or (ii)
decoding MPEG-4 Video that was encoded by a consumer engaged in a personal and non-commercial activity
and/or was obtained from a video provider licensed by MPEG LA to provide MPEG-4 Video. No license is granted or
shall be implied for any other use. Additional information including that relating to promotional, internal and commer-
cial uses and licensing may be obtained from MPEG LA, LLC. See http://www.mpegla.com.
PC in which this software is installed
WJ-ND200
Removed hard disk drive
Remove the removable hard disk drive.
Connect the removed hard
disk drive with the PC.
Optional interface cable
(USB-SATA cable)
4
Trademarks and registered trademarks
•Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United
States and/or other countries.
•Microsoft, Windows, Internet Explorer, and ActiveX are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
•Other names of companies and products contained in these operating instructions may be trademarks or regis-
tered trademarks of their respective owners.
Abbreviations
The following abbreviations are used in these operating instructions.
Microsoft®Windows®2000 Professional Service Pack 4 is described as Windows 2000.
Microsoft®Windows®XP Professional SP2 and Microsoft®Windows®XP Home Edition SP2 are described as
Windows XP.
System requirements for a PC
It is recommended to operate this software using a PC that meets the following system requirements. If using a PC
that does not meet the following system requirements, it may cause problems such as slow imaging or this software
becomes inoperable.
OS Microsoft®Windows®2000 Professional SP4
Microsoft®Windows®XP Professional SP2
Microsoft®Windows®XP Home Edition SP2
OS Language English, French, Spanish, German, Italian
CPU Pentium®4 3.0 GHz or faster
Memory 512 MB or more
Monitor 1 024 x 768 pixels or more, 24-bit True color or better
Interface USB port (USB 2.0 compliant)
Required hard disk drive space 200 MB or more
Other CD-ROM drive: It is necessary to read the operating instructions and use the
software on the provided CD-ROM.
Adobe®Reader: It is necessary to read the operating instructions on the pro-
vided CD-ROM.
Notes:
•This software must be installed or started by the administrator. Otherwise, any problems will not be covered by
the warranty.
•In these operating instructions, the settings are performed on Windows XP as examples.
5
CONTENTS
Limitation of Liability .................................................................................................................. 2
Disclaimer of Warranty .............................................................................................................. 2
Features .................................................................................................................................... 3
About copyright and license ................................................................................................... 3
Trademarks and registered trademarks ................................................................................. 4
Abbreviations .......................................................................................................................... 4
System requirements for a PC ............................................................................................... 4
Installing This Software ............................................................................................................. 6
Uninstalling This Software ......................................................................................................... 7
Connect the Removed Hard Disk Drive with the PC ................................................................. 8
Start the Software ...................................................................................................................... 9
About the Operation Window .....................................................................................................10
Operations Flow ......................................................................................................................... 11
Search and Play Recording Event ............................................................................................. 15
About filtering .......................................................................................................................... 15
About displaying the recording event list window ................................................................... 15
How to operate ....................................................................................................................... 16
Save the Displayed Paused Playback Image ............................................................................ 18
Print the Displayed Paused Playback Image ............................................................................. 19
Check the Removal Hard Disk Drive ......................................................................................... 20
Troubleshooting ......................................................................................................................... 21
6
Installing This Software
Install this software as follows.
Step 1
Insert the provided CD-ROM into the CD-ROM drive on the PC.
Step 2
Double click "hdvsetup.exe" in the "HDD Viewer" folder.
The confirmation window will be displayed.
Step 3
Click the "OK" button and follow the installation wizard to install this software.
The "HDD Viewer" folder will be created (C:\Program Files\Panasonic\WJ-ND200\HDD Viewer) and the necessary
files will be copied in it.
When installation is complete, the application will be added to "Programs" in "Start" and the shortcut will be created
on the desktop.
Important:
Do not edit, remove, or move the directory path of the files above. Otherwise, this software may not function
properly.
Note:
When re-installing this software is needed, the existing software must be uninstalled first.
7
Uninstalling This Software
If required, uninstall this software as follows.
Step 1
Open "Add or Remove Programs" in "Control Panel".
The "Add or Remove Programs" window will be displayed.
Step 2
Select "HDD Viewer" and click the "Remove" button.
Step 3
Follow the uninstall wizard.
8
Connect the Removed Hard Disk Drive with the PC
Connect the removed hard disk with the PC in which this software is installed as follows.
Step 1
Remove the removal hard disk drive from the WJ-ND200.
Note:
Refer to the installation guide or the operating instructions (PDF) of the WJ-ND200 for how to remove the remov-
able hard disk drive.
Step 2
Connect the removed hard disk drive and the PC in which this software is installed using an optional interface cable.
Note:
Contact your dealer about the interface cable to be used to connect the removable hard disk drive and the PC.
Step 3
Check if the connected hard disk drive is displayed in "My Computer".
Important:
The connected hard disk drive will be displayed as "Local Disk (*:)".
("*" varies depending on the system configuration of the PC.)
Do not perform the following operations on this local drive.
Otherwise, this hard disk drive may become inoperable on both the WJ-ND200 and the viewer software.
•Deletion of folders and files
•Move of directories of folders and files
•Edit of folders and files (contents, attributes, etc.)
•Defragmentation
•Formatting
9
Start the Software
Start the software as follows.
Screenshot 1
Start operation just after the PC is started up. Step 1
Select "HDD Viewer" from the "Start" menu ("Start" - "All
Programs" - "Panasonic" - "WJ-ND200" - "HDD Viewer")
or double click the shortcut icon of "HDD Viewer" on the
desktop.
→The software will start up.
Important:
Log in to the PC as an administrator before starting
the software.
Screenshot 2
The operation window will be displayed. Step 2
Click the [HDD select] button, and then select the
removal hard disk drive connected with the PC dis-
played as "Local Disk (*:)" under "My Computer".
Note:
"*" varies depending on the system configuration of
the PC.
Step 3
Close the window by clicking the button at the top
right of the window to exit the software.
Important:
•When using Windows®XP Professional or Home
Edition SP2, it may be possible that the "Windows
Security Alert" window is displayed. In this case,
click the "Unblock" button on the displayed
"Windows Security Alert" window.
10
About the Operation Window
Tool bar
(Status display area): Indicates the cur-
rent playback status.
[Search] button: Click this button to start searching
recording events to be played.
[Save] button: Click this button to save the current-
ly displayed paused playback image.
(This button works only when the paused playback
image is displayed. It doesn’t work when the save
button is displayed as .)
[Print] button: Click this button to print the currently
displayed paused playback image using a printer
connected with the PC.
(This button works only when the paused playback
image is displayed. It doesn’t work when the print
button is displayed as .)
[HDD select] button (Open button): Click this but-
ton to select the connected removal hard disk drive.
The path of the selected removable hard disk drive
will be displayed on the left side of the HDD select
button (HDD path display area).
[HDD check] button: Click this button to start the
HDD check.
Recording event list
A list of recording events will be displayed.
Playback image display area
Playback images will be displayed in this area.
Various playback functions are available using the but-
tons located below the playback image display area.
The current playback point will be indicated by the point-
er on the slider.
Tool bar
Recording event list
Playback
image dis-
play area
Playback operation buttons
Other manuals for WJND200 - NETWORK DISK RECORDER
6
Table of contents
Other Panasonic Software manuals
Panasonic
Panasonic PANATERM Ver. 3.7 User manual
Panasonic
Panasonic PT-LW80NT User manual
Panasonic
Panasonic Avccam AG-AF100A Series User manual
Panasonic
Panasonic AJ-SF771AP User manual
Panasonic
Panasonic HNP11 User manual
Panasonic
Panasonic WORKIO DP-1810 User manual
Panasonic
Panasonic BB-HNP60 User manual
Panasonic
Panasonic WV-AS65 User manual
Panasonic
Panasonic WJMPU955A - CENTRAL PROCESSING UNIT User manual
Panasonic
Panasonic WJ-ND300 Administrator Console User manual
Panasonic
Panasonic WV-ASC970 User manual
Panasonic
Panasonic Voice Editing Ver.2.0 User manual
Panasonic
Panasonic Australia Asset Library User manual
Panasonic
Panasonic BB-HNP11A User manual
Panasonic
Panasonic Workio DP-2310 User manual
Panasonic
Panasonic RQT6118-Y Technical specifications
Panasonic
Panasonic WORKIO DP-130 User manual
Panasonic
Panasonic WJMPU955 - PROCESSING UNIT - TMU User manual
Panasonic
Panasonic Workio DP-3510 User manual
Panasonic
Panasonic BB-HPN15A Instruction manual
