Panasonic PressIT TY-SB01WP User manual
Operating Instructions
Basic Guide
Wireless Presentation System Receiver Board
For business use
Model No. TY-SB01WP
Thank you for purchasing the Panasonic product.
• Please read these instructions before operating this product and retain
them for future reference.
•Be sure to read “Safety Precautions ” (page 2) before use.
DPQX1531ZA/X1DA0121TS0 -PB
Safety Precautions 2
Part Names 4
Transmitter Extension Method (Pairing) 8
Installtion of the receiver board 5
Basic Use 6
Setting 10
Notes on Using Wireless LAN 15
Request Regarding Security 17
Specifications 19
English
* PressIT is a nickname for “Wireless Presentation System”.
Precautions for use 3
2 English
Safety Precautions
WARNING:
When mounting or removing this product on or from
the flat panel display unit, be sure to turn the power
off, and remove the power plug from the socket.
Otherwise, electric shock may occur.
Never attempt to disassemble or modify this product.
Doing so may cause fire, electric shock or operation
errors.
If you sense smoke, unpleasant odour or unusual
noises, immediately disconnect the power plug from
the socket.
Using the product in an abnormal condition may cause
fire or electric shock.
For mounting or removing this product on or from
the flat panel display unit, ask a qualified technician
or sales dealer.
Installing the product improperly may cause a
malfunction or electric shock.
• If you terminate the use of the product, ask a
professional to remove it promptly.
Use the product 15 cm or more away from a location
where a cardiac pacemaker is embedded.
Radio waves may affect the operation of the pacemaker.
Do not use the product in an airplane.
The operational safety may be impaired.
Do not use the product near an automatic door, fire
alarm or other automatic control devices.
Radio waves from this product may affect automatic
control devices, which may cause an operational error,
resulting in an accident.
Do not use the product in hospital or a location with
medical equipment.
Radio waves from this product may affect medical
equipment, which may cause an operational error,
resulting in an accident.
Do not wet the product.
Doing so may cause a fire or electric shock.
CAUTION:
Do not place the product at a high-temperature
location, humid or dusty location, or location subject
to oil smoke or steam (such as a cooking table and
humidifier).
Doing so may cause a fire or electric shock.
Do not place the product in locations subject to
direct sunlight or extremely high temperature.
• The internal parts may be damaged, or fire may occur.
3English
Precautions for use
This product is a Wireless Presentation System
Receiver Board used by being attached to a
Panasonic display.
Do not touch this product directly by hand.
• Static electricity may occur, destroying the
components. Static electricity is also generated from
clothing or human body. Let the static electricity
escape by touching metallic objects such as a steel
cabinet beforehand.
The illustrations and figures in this manual are for
explanatory purposes and may differ from the actual
product.
Details of usage
For details of usage, read “Operating Instructions -
Functional Manual”.
Download the “Operating Instructions - Functional
Manual” from the following URL.
https://panasonic.net/cns/prodisplays/wps2/
For detailed usage of a display supporting this product,
read the operating instructions of the display.
4 English
Part Names
1Antenna
▼Connectionterminals/Controls
2FUNCTION button
Used to save a pairing file to the USB memory.
3LAN terminal (RJ45)
Connectstothenetworktochangethesettingsofthe
product.
4USB terminal (Type-A)
ConnectsthetransmitterorUSBmemorywhen
pairing devices.
Use this by connecting an HID device (mouse, touch
module).
5FUNCTION LED
Displays the pairing status.
6Power Indicator
Displays the power supply status, and connection
statuses of LAN and USB.
7Reset button
Restores the product to the factory default state.
Reset operation starts when the reset button is
pressed for 5 seconds or more.
1
▼Connectionterminals/Controls
2 3 4
5
6 7
5English
Installtion of the receiver board
The installation instruction below is based on the flat
panel display SQ1 series as an example.
For attaching or removing this product to or from the flat
panel display unit, it is recommended to ask a qualified
technician or sales dealer. A malfunction may occur due
tostaticelectricity,etc.Consultthesalesdealer.
Follow the steps below.
Note
• Be sure to turn off the display unit and connected
devices, remove the power plug from the socket, and
disconnect the cables from the display.
•
When attaching/removing the receiver board, do not allow
the metal to damage the back cover or display label.
1Remove the 2 screws, and then remove
the slot cover or receiver board from the
display unit.
To remove the receiver board, hold the handle of
the receiver board and pull it out slowly in the arrow
direction.
2Insert the receiver board to the main unit
slot, and tighten the 2 screws.
Fix the receiver board with the 2 screws removed in
step 1.
●Tightening torque guideline: 0.5 N·m or less
Note
• When replacing another receiver board with this
product, the customer shall keep the replaced receiver
board for future repair or servicing.
6 English
Basic Use
Receiver board
1Turn on the display.
2Switch the input of the display to [SLOT].
3Pair the receiver board and the transmitter.
(when connecting for the first time, see page 8)
4When the standby screen appears on the
display, preparation of the receiver board is
complete.
Standby screen
Transmitter
1Connect the USB terminal and HDMI input
terminal of the transmitter to the image
output device.
• For power supply to the transmitter, 5 V/0.9 A
power supply is necessary.
HDMI input
terminal
TY-WPBC1
USB terminal
TY-WPB1
ForTY-WPBC1,connecttheUSBterminal(Type-C)to
an image output device that supports the DisplayPort
ALT Mode.
7English
2
Main LED changes from red blinking
(connecting) to white illumination (standby).
Red blinking (connecting) White illumination
(standby)
3Press the main button of the transmitter.
The image is displayed.
Standby screen Full screen display
White illumination
(standby)
Green illumination
(display)
Pressing the main button again changes the main
LED to white and returns to standby state.
(The screen returns to the standby screen as well.)
• When using multiple transmitters, the image is
switched to the image of the transmitter of which
the main button is pressed.
8 English
Transmitter Extension Method (Pairing)
Pairing by connecting the receiver board
and transmitter
1Slide the mode switch to the STD side.
2
Connect the USB terminal of the transmitter
to the USB terminal of the receiver board.
TY-WPB1 TY-WPBC1
ToconnecttheTY-WPBC1,
use the conversion adaptor
for pairing supplied with
theTY-WP2BC1/TY-
WPBC1.
WaitforawhileuntiltheFUNCTIONLEDofthe
receiver board blinks in white. Then, pairing starts
automatically.
“Pairing…” (pairing in progress) is displayed on the
standby screen.
3Pairing is complete.
“Pairing OK”isdisplayedandtheFUNCTIONLEDof
the receiver board lights up in white.
Pairing... Pairing OK
4Remove the USB cable of the transmitter
from the receiver board.
9English
Pairing by saving a file to the USB memory
Supported device
●CommerciallyavailableUSBmemorydevicesare
supported. (Those with security functions are not
supported.)
●USB memory devices other than those formatted in
FAT16 or FAT32 cannot be used.
●Up to 32 GB of USB memory in size are supported.
●Only single partition configuration is supported.
1Connect the USB memory to the USB
terminal of the receiver board.
1
2
2Press the FUNCTION button.
TheFUNCTIONLEDlightsupinwhiteandthe
pairing file is saved to the USB memory.
3Remove the USB memory.
4Slide the mode switch to the EXT side.
5Supply power to the transmitter.
6
5
6
5
TY-WPB1
TY-WPBC1
5 V/0.9 A
Power supply
5 V/0.9 A
Power supply
6Connect the USB memory to the USB
terminal of the transmitter.
7Pairing is complete.
The main LED of the transmitter lights up in white.
8Remove the USB memory from the
transmitter.
10 English
Setting
[Setup] menu (display setting)
When this product is connected to the compatible
display and the [Setup] menu is set, the following
functions can be used.
This section explains each setting using the
display SQ1 series as an example. For settings
on other models, see the Panasonic information
site.
Panasonic display link function
Just connect the receiver board to a Panasonic display
supporting this product and turn them on to perform
the link operation. (It is necessary to set [Wireless
presentation link] to [On].)
Set link function details in the following setting menus.
■External device link settings
Sets external device link.
[External device link settings]- submenu screen
External device link settings
Device information Off
Wireless presentation link
On
●[Device information]
Sets whether to display or hide the information of the
device connected to the HDMI terminal and SLOT.
[Off]: Connecteddeviceinformationisnot
displayed.
[On]: Connecteddeviceinformationisdisplayedas
shown below.
SLOT
16:9
PressIT
Note
• The obtained information of either signal or HDMI-
CECisdisplayed.
• Up to the first 16 characters obtained are displayed.
Table of contents
Other Panasonic Receiver manuals
Panasonic
Panasonic RF-2400D User manual
Panasonic
Panasonic CQ-VD5505W User manual
Panasonic
Panasonic CQ-DFX501 User manual
Panasonic
Panasonic KX-NS8290 User manual
Panasonic
Panasonic RF-B11 User manual
Panasonic
Panasonic SA-HR45E User manual
Panasonic
Panasonic SH-FX60 - Wireless Audio Delivery System User manual
Panasonic
Panasonic CF-AA1683A User manual
Panasonic
Panasonic RF-SW100 User manual
Panasonic
Panasonic SAHE75 - RECEIVER User manual
Panasonic
Panasonic SAHE7 - RECEIVER User manual
Panasonic
Panasonic WVRC100 - BROADCAST RECEIVER Operating instructions
Panasonic
Panasonic QTR 2140 User manual
Panasonic
Panasonic SH-FX50T User manual
Panasonic
Panasonic SAXR70 - RECEIVER User manual
Panasonic
Panasonic CZ-RWRL3 User manual
Panasonic
Panasonic CQVW100U - Car Audio - In-Dash DVD Receiver User manual
Panasonic
Panasonic CQ-RDP153N User manual
Panasonic
Panasonic SHFX71 - WIRELESS SYSTEM User manual
Panasonic
Panasonic SC-HT270 Operating User manual
