Overland Storage SnapServer XSD 40 User manual

*10400592001*

SnapServer®XSD 40

Add-on/Spare DIMM Instructions

This document describes how to add an additional or remove

and replace an existing DIMM (Dual In-line Memory Module)

in a SnapServer XSD 40 from Overland Storage.

WARNING: To reduce the risk of electric shock or damage to

equipment, always remove any power cords while working

with the unit.

WARNUNG: Um das Risiko eines elektrischen Schlags oder

Schäden am Gerät zu vermeiden, ziehen Sie stets den

Netzstecker, bevor Sie an der Einheit arbeiten.

AVERTISSEMENT: Pour réduire le risque de choc électrique

ou endommagement de l'équipement, retirez toujours les

cordons électriques en travaillant avec l'appareil.

CAUTION: While working with the unit, observe standard

Electrostatic Discharge (ESD) precautions to prevent damage

to micro-circuitry or static-sensitive devices.

NOTE: If you are only replacing an existing DIMM, skip ahead to

the next section, “Prepare the Unit.”

When adding a second DIMM to your unit, you must first

support are not available until this is done:

1. Go to the Overland Storage website

http://www.overlandstorage.com/

2. Select

Service & Support > My Products

3. At the Site Login, enter your e-mail address and

password, and click GO.

4. Click the Manage Products button.

5. From the Product Selector drop-down list, select the

XSD 40 in which you are installing the extra DIMM.

6. Click Add a Component.

7. Enter the DIMM information.

8. Click Save & Exit.

IMPORTANT: Your warranty certificate will be emailed to you.

Follow the instructions included in the email to complete the

registration process.

Enter

5325301507-XSD 40 s/n: 0247

Add-on/Spare DIMM Instructions

Prepare the Unit

Power Off and Disconnect

1. Briefly press the Power button on the front.

2. When all front LEDs are off, disconnect the power cord.

3. Disconnect all the cables from the unit.

Remove the Right-side Panel

DIMMs are accessed through the right-side panel, when facing

the unit front.

1. On the back of the unit, remove and retain the thumb

screw securing the side panel.

2. Slide the side panel towards the back of the unit until the

anchors release and the panel is free to remove sideways.

3. Set the panel on a secure surface.

Remove the DIMM

This process applies only to replacing existing DIMMs. To

simply install an additional DIMM, proceed to “Install DIMM.”

1. Press the latches on each end of the DIMM.

2. Unseat the DIMM by pulling it straight out.

3. If desired, repeat Steps 1–2 to replace the second DIMM.

Power Button

Right-side Thumb Screw

DIMM slot

Add-on/Spare DIMM Instructions

Install DIMM

Install DIMMs

NOTE: If only one DIMM is installed, it must be installed in the

lower DIMM slot.

1. In the lowest available empty DIMM slot, align the DIMM

in the slot, lining up the DIMM notch with the guide in the

slot.

2. Firmly press the DIMM down until the latches lock it in

place.

3. To install a second DIMM, repeat Steps 1–2 using the

remaining DIMM slot.

Reassemble the Unit

Reinstall the Side Panels

NOTE: The panels are interchangeable; if you are having issues,

reverse the orientation of the panel. When correctly installed, the

side panels will slightly overlap the back of the unit.

1. On the new chassis, position the side panel with no more

than one-half inch (1.25 cm) extending out over the rear

of the unit.

2. Align the tabs on the panel with the slots on the side of the

unit.

3. Push the panel sideways to be flush with the side of the

unit, then slide the panel towards the front of the unit.

Ensure that the tabs are seated securely in the slots.

4. Reinstall the thumb screw on the back of the unit to

secure the panel.

IMPORTANT: If this is a new appliance install, continue with

the SnapServer XSD 40 Quick Start Guide instructions.

Reattach Cables and Power Cord

1. Reattach all cables to the same connections as before.

2. Attach the power cord.

3. At the front, press the power button to power it ON.

DIMM slot

AC Power

Cable Ports

http://support.overlandstorage.com

You can get additional technical support on the Internet at the Overland Storage Support web page, or by contacting Overland Storage using

the information found on the Contact Us page on our web site.

Add-on/Spare DIMM Instructions

Verify Memory

1. In the Web Management Interface, go to

Monitor >

System Status

2. Verify the

Memory

amount is correct.

The usual DIMM memory GB rounding variations apply.

If necessary, click

Refresh

to display the current settings.

3. Click

Return Old Parts to Overland

1. Place the old part in the anti-static bag and put it in the

replacement part’s box.

2. Use an RMA to return the part to Overland Storage.

For return shipping details and RMA number, go to:

http://docs.overlandstorage.com/return-instructions

Other manuals for SnapServer XSD 40

Table of contents

Other Overland Storage Storage manuals

Overland Storage

Overland Storage SnapServer User manual

Overland Storage

Overland Storage NEO S-Series User manual

Overland Storage

Overland Storage NEO XL Series Manual

Overland Storage

Overland Storage LTO-4 User manual

Overland Storage

Overland Storage SnapScale X2 User manual

Overland Storage

Overland Storage NEO 200S User manual

Overland Storage

Overland Storage SnapServer Service manual

Overland Storage

Overland Storage NEOs T24 User manual

Overland Storage

Overland Storage SnapServer DX2 User manual

Overland Storage

Overland Storage NEO 8000E User manual

Overland Storage

Overland Storage NEO XL Series User manual

Overland Storage

Overland Storage SnapServer DX1 User manual

Overland Storage

Overland Storage REO 4500x User manual

Overland Storage

Overland Storage NEO 8000 User manual

Overland Storage

Overland Storage LTO-5 User manual

Overland Storage

Overland Storage REO 1000 User manual

Overland Storage

Overland Storage NEO 2000e User manual

Overland Storage

Overland Storage Neo Series 2000 User manual

Overland Storage

Overland Storage PowerLoader User manual

Overland Storage

Overland Storage E Series User manual

Overland Storage

Overland Storage NEO 2000e User manual

Overland Storage

Overland Storage NEO XL Series User manual

Overland Storage

Overland Storage ARCvault 48 User manual

Overland Storage

Overland Storage NEO 8000 User manual

Popular Storage manuals by other brands

QNAP

QNAP TS 32PXU Series user guide

LaCie

LaCie RUGGED RAID user manual

Freecom

Freecom CLS DOCK Quick install guide

PNY

PNY Attache P-FD64MBATT3 install guide

HP StorageWorks MSL2024 Getting started

OLT

OLT 6x6 Maximizer Assembly manual

Transcend

Transcend JetFlash 160 Specifications

LaCie

LaCie RUGGED MINI user manual

Thunderbolt

Thunderbolt 600 user manual

Panasonic

Panasonic LB-DH8 series Operator's guide

Intel

Intel RAID High Availability user guide

LaCie

LaCie 12big Thunderbolt 3 Quick install guide

Spectra Logic

Spectra Logic T-Series Spectra T50e quick start guide

Panasonic

Panasonic LKM-F931-1 instruction manual

Tabernus

Tabernus Enterprise Erase E2400 user guide

Rocstor

Rocstor COMMANDER 3F series user manual

HP P9000 user guide

Western Digital

Western Digital Ultrastar Data60 installation guide