5 6
8
7
Troubleshooting
Problem Solution
No sound / no FM reception Check that the hearing aid battery is inserted cor-
rectly. Check that the receiver is on and correctly
connected.
Check that the transmitter is on.
Press the Amigo transmitter SYNC button again.
The R12 cannot be synchronized Synchronization takes place wirelessly, so if the
receiver fails to confirm (with three blinks of the
LED), try to move the Amigo T/T/WRP closer,
farther away or slightly to one side. Then press the
SYNC button again.
Cleaning
Being moisture repellent, the Amigo R is easy to clean. It should be cleaned on a regular basis,
using a damp cloth. DO NOT use liquids to clean the R.
Warnings and precautions
Amigo parts can be dangerous if swallowed:
Amigo receivers should be kept out of children’s reach and anyone else who might play with them
and cause injury to themselves. Special attention should be paid to prevent children from swallow-
ing them and perhaps choking. If a receiver is swallowed, see a doctor immediately.
• NEVER change the battery and never connect the receiver to the hearing instrument in front of
infants, small children or people with learning diculties.
System dysfunctions
The Amigo system will cease to function if the batteries run out. The system may also produce a
high whistling noise (feedback) if the battery is low, or if it is subjected to loud sound while the
microphone is o but the receiver is still on. Users should be aware that these sounds should not
be confused with warning sounds – e.g. car horns in trac.
Interference
Your receiver has been thoroughly tested for interference, according to the most stringent interna-
tional standards. But new technical developments constantly bring new products into society, and
some may emit electromagnetic radiation, leading to unforeseen interference in hearing instru-
ments. Examples include induction cooking appliances, shop alarm systems, mobile telephones,
fax machines, personal computer devices, X-rays, computer tomography etc.
Use in aircrafts:
• FM systems should not be used on aircrafts without the permission of the flight crew.
Please note that Amigo FM devices can cause interference with other medical devices. Such interfer-
ence can also be caused by radio signals, power line disturbances, airport metal detectors, electro-
magnetic fields from other medical devices and electrostatic discharges.
Manufacturer’s declaration
This Amigo product fully complies with the essential requirements and other relevant provisions of
Directive //EC. Declaration of conformity is available at:
Oticon A/S
Kongebakken 9
DK-2765 Smørum
Denmark.
www.oticon.com
Safety requirements regarding Direct Audio Input (DAI)
The safety of an Amigo with DAI (Direct Audio Input) is determined by the external signal source.
When connecting the DAI to AC-operated equipment, this equipment must comply with IEC,
IEC or equivalent safety standards.
Manufacturers’ warranty
As the manufacturer, Oticon, issues a two-year limited warranty to the original consumer of this
product.
This warranty comes into eect upon the date of original purchase of this equipment, and will
remain in eect for two calendar years from that date.
What is covered by this warranty?
Any electronic component which, due to workmanship, manufacturing, or design defects, fails to
function properly under normal use during the warranty period will be replaced or repaired at no
charge for parts or labor when returned to the point of purchase. Transportation must be paid by
the customer. If it is determined that repair is not feasible, the entire unit may be replaced with an
equivalent subject to mutual agreement between the hearing care professional and customer.
Statement:
NOTICE:
This device complies with Part 15 of the FCC Rules (and with RSS-210 of Industry Canada).
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTICE:
Changes or modifications made to this equipment not expressly approved by Oticon A/S may void
the FCC authorization to operate this equipment.
NOTICE:
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital de-
vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
908 64 411 00 / 04.08
N1175
FCC: UAR
IC ID: BT
Waste from electronic equipment
must be handled according to local
regulations.
Oticon, Inc.
29 Schoolhouse Road
Somerset, NJ 08873
www.oticonusa.com
www.amigofm.com
