Oticon BTE 312 User manual

INSTRUCTIONS FOR USE BTE 312

BTE POWER

Thank you

Thank you for choosing a Safari hearing instrument for yourself or your child.

To support your efforts, we have put great care and attention into making sure that

all new hearing instruments are of the highest quality and that they are easy to

use and maintain.

We recommend that you read this manual carefully to exploit the maximum benefit

of the hearing instruments.

We would like to congratulate you on your decision to actively improve your or your

childs hearing with today’s most advanced hearing technology in the market.

Contents

Instrument View BTE 312 5a

Instrument View BTE Power 5b

Changing batteries 7

BTE 312 – Tamper-resistant battery door (Optional) 9

BTE Power – Tamper-resistant battery door (Optional) 10

Turning your instrument ON and OFF 11

Left/Right ear marking 12

Putting on the hearing instrument 13

Push-button 14

Programs (Optional) 16

Volume Control (Optional) 18

Stand-by (Optional) 20

Telecoil (Optional) 21

Auto Phone (Optional) 22

FM 24

DAI (Direct Audio Input) 26

Audible and visual indicators 28

Instrument View BTE 312

Battery size: 312

Microphone

openings

Visual indicator

(LED)

Push-button/

Volume Control

Earmould

Battery door

Sound hook Plastic tube

Sound outlet

Ventilation

opening

Caring for the hearing instrument 31

Avoiding heat, humidity and chemicals 36

Good communication habits if your child has a hearing loss 37

Seven easy steps to better hearing if you have a hearing loss 38

Common problems and their solutions 44

Warnings

IMPORTANT NOTICE

Please familiarise yourself with the entire contents of this booklet before using the

hearing instruments. It contains instructions and important information about the use

and handling of the hearing instruments and batteries.

Safari BTE Power is a powerful hearing instrument. Never allow others to wear your

hearing instruments as incorrect or wrongful usage could cause permanent damage

to their hearing.

Instrument View BTE Power

Battery size: 13

Microphone

openings

Visual indicator

(LED)

Push-button/

Volume Control

Earmould

Battery door

Sound hook Plastic tube

Sound outlet

Ventilation

opening

Changing batteries

A worn out battery should be removed immediately and

disposed of according to local regulations.

When the battery power is low, the visual indicator (LED)

blinks rapidly and continuously (if enabled), and the user

will hear 2 beeps (if enabled).

This pre-warning starts when the battery has only a few

hours of operation left. The 2 beeps will be repeated in

moderate intervals to indicate it is time to change the

battery.

If the battery runs out the instrument turns off. When that

happens, 4 beeps are played and the visual indicator (LED)

will turn off (if enabled) to indicate that the instrument is

no longer operating.

8 9

BTE 312 – Tamper-resistant battery door

(Optional)

To keep the battery out of reach of small children and people with

learning difficulties, it is strongly recommended to use a tamper-

resistant battery door on the hearing instrument.

Instructions

To lock the battery door:

Make sure the door is completely closed. Use the screwdriver in the

Multitool to turn the tamper-resistant screw to locked position.

To unlock the battery door:

Use the screwdriver in the Multitool to turn the tamper-resistant

screw to unlocked position. The battery door can be opened as usual.

Important: Do not force the battery door beyond its fully opened

position. Make sure to insert the battery correctly. The use of

excessive force can deform the battery door, which will reduce its

tamper resistant effectiveness.

To replace the battery, follow these instructions:

• Open the battery door fully by pushing the raised edge on the bottom of the

instrument. Remove the old battery. To assist with the handling of the batteries,

the magnet placed at the end of the MultiTool can be used.

• Remove the sticky label from the + side of the new battery.

• The new battery may be inserted by using the magnetic end of the MultiTool.

Ensure that the positive (+) marking faces the positive (+) sign printed on the

battery door. Close the battery door.

Any moisture on the battery surface should be

wiped off before use.

After replacing the battery, it will take a few seconds

before the battery works to full capacity. MultiTool

10 11

Turning your instrument ON and OFF

Turn ON the hearing instrument by closing the battery door completely with the battery

in place. If enabled the instrument will start up by playing a jingle and the LED will blink

according to program setting (see chapter about programs). This indicates that the

battery is working and the instrument is operating.

Turn OFF the hearing instrument by opening the battery door slightly until a “click” is felt.

To preserve the battery, make sure the hearing instrument is switched off when not worn.

IMPORTANT NOTICE

Open the battery compartment

fully to allow air to circulate

whenever you are not using your

hearing instrument, e.g. at night!

Click

OFF

Click

BTE Power – Tamper-resistant battery door

(Optional)

To keep the battery out of reach of small children and people with learning difficulties,

it is strongly recommended to use a tamper-resistant battery door on the hearing

instrument.

The battery door is designed only to be opened using a tool. Use the MultiTool to unlock

the door by inserting it into the channel in the bottom of the hearing instrument and

push on the door to open.

Important: Do not force the battery door beyond

its fully opened position. Make sure to insert the

battery correctly. The use of excessive force can

deform the battery door, which will reduce its

tamper resistant effectiveness.

12 13

Putting on the hearing instrument

Place the tip of the earmould in the ear canal, twisting

slightly, making sure that the top part of the earmould (A)

is pushed behind and under the fold (B) of the ear.

Gently pull up the ear and press the earmould in the

direction of the ear canal.

With the earmould positioned correctly in the ear, place

the hearing instrument behind the ear by lifting the base

of the hearing instrument over the top of the ear.

Left/Right ear marking

Hearing instruments are fitted to the uniqueness of each ear, which means that if you or

your child has two instruments the left hearing instrument may be programmed differ-

ently from the right. Therefore, it is important to distinguish between the left and the

right hearing instrument.

In order to easily identify the left or right hearing instrument, colour markings may be

applied inside the battery door.

Blue marks the LEFT instrument.

Red marks the RIGHT instrument.

14 15

DOWN

Push-button

The hearing instrument has an ergonomic designed push-button for volume adjustment

and shifting between programs.

The push-button can be activated by pressing either the upper (UP) or lower (DOWN) end

of the button.

The push-button on the hearing instrument can be programmed to one of 3 functionalities.

To be filled out by your Hearing Care Professional!

Left Right

Program shift:

Press shortly to change program.

Volume control:

Press shortly to adjust the volume.

Both volume control and program shift:

Press shortly to adjust the volume and press long (about 2seconds)

to shift program.

Binaural coordination enabled (see “Using 2 instruments” in the programs and

volume control chapters).

16 17

Below you can see a description of the programs available in the hearing instrument.

To be filled out by the Hearing Care Professional!

Prg. 1:

Prg. 2:

Prg. 3:

Prg. 4:

Using 2 instruments

For ease of use, the push-button can be programmed to shift to the equivalent program

in the other instrument (Safari 900 and 600 only). Shifting the program on one side, will

shift the program on the other side as well. This is referred to as binaural coordination of

the push-button.

Backward

Forward

Programs (Optional)

The hearing instrument can have up to 4 different programs. When using FM or DAI

2 additional programs are added (see chapters about FM and DAI for more details).

When shifting between programs, the hearing instrument will beep to indicate to the user

which program is set. If enabled, the visual indicator will show a corresponding blinking

pattern.

Tone Visual indicator

One beep, when you switch to program 1 One blink

 Two beeps, when you switch to program 2 Two blinks

 Three beeps, when you switch to program 3 Three blinks

 Four beeps, when you switch to program 4Four blinks

Press the upper end of the push-button to go forwards in the program cycle e.g from P1-P2.

Press the lower end of the push-button to go backwards in the program cycle e.g from P3-P2.

This manual suits for next models

Table of contents

Other oticon Hearing Aid manuals

oticon

oticon Nera2 Pro Ti User manual

oticon

oticon HIT PRO User manual

oticon

oticon miniRITE Alta2 User manual

oticon

oticon OPN User manual

oticon

oticon RemoteCare User manual

oticon

oticon Intiga i User manual

oticon

oticon Amigo T10 Assembly instructions

oticon

oticon STREAMER PRO User manual

oticon

oticon miniRITE R User manual

oticon

oticon CIC WL Fusion 2 User manual

oticon

oticon Steamer User manual

oticon

oticon Alta2 Pro Ti User manual

oticon

oticon Agil User manual

oticon

oticon Amigo R5 bodyworn with Advanced Bionics... User manual

oticon

oticon OPN MINIRITE User manual

oticon

oticon Chili Assembly instructions

oticon

oticon Oticon Opn 1 BTE13 PP User manual

oticon

oticon ConnectClip User manual

oticon

oticon Xceed BTE SP User manual

oticon

oticon IIc User manual

oticon

oticon EduMic User manual

oticon

oticon miniRITE R User manual

oticon

oticon minirite User manual

oticon

oticon minirite User manual

Popular Hearing Aid manuals by other brands

Sonic

Sonic Bliss miniBTE user guide

Lexie

Lexie B1 Replacement guide

Widex

Widex FM+DEX User instructions

Siemens

Siemens Triano user guide

Camplicomms

Camplicomms HC-200 user guide

Widex

Widex SUPER 220 S2-VSD user manual

Phonak

Phonak Q90 user guide

Williams Sound

Williams Sound SoundPlus WIR 237 Manual and user guide

Oticon Medical

Oticon Medical Ponto SoundConnector Instructions for use

Siemens

Siemens Life micon user guide

Starkey

Starkey Destiny Operation manual

Audicus

Audicus The Icon instruction manual

Advanced Bionics

Advanced Bionics Slim HP Standard Instructions for use

Widex

Widex DREAM440 THE DREAM SERIES User instructions

Phonak

Phonak myPilot user guide

NIKEN

NIKEN NK-401 instruction manual

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Getting started guide

Sonetik

Sonetik GOHEAR user guide

oticon BTE 312 User manual

Popular Hearing Aid manuals by other brands