oticon Alta2 Pro Ti User manual
Alta2 Nera2 Ria2
INSTRUCTIONS FOR USE BTE
Alta2 Pro Ti, Nera2 Pro Ti, Ria2 Pro Ti
Introduction to this booklet
This booklet guides you in how to use and maintain your new
hearing instrument. Please read the booklet carefully including
the Warning section. This will help you to achieve the full benet
of your new hearing instrument.
Your Hearing Care Professional has adjusted the hearing
instrument to meet your needs. If you have additional questions,
please contact your Hearing Care Professional.
About Start up Handling Options Warnings Tinnitus Additionals
For your convenience this booklet contains a navigation bar to help
you navigate easily through the dierent sections.
Indication for use
The hearing instrument is intended to amplify and transmit sound
to the ear and thereby compensate for mild to moderate-to-severe
hearing impairment.
IMPORTANT NOTICE
The hearing instrument amplication is uniquely adjusted and optimized
to your personal hearing capabilities during the instrument tting
performed by your Hearing Care Professional.
Table of content
Options
Warnings
Tinnitus
Additionals
About
Start up
Handling
Identify your hearing instrument style
and ear piece 6
BTE with sound hook and mold 8
BTE with thin tube (Corda miniFit) 10
Identify left and right instrument 12
Battery 13
Turn the hearing instrument on and o 14
When to replace a battery 15
Replace the battery 16
Caring for your hearing instrument 18
Sound hook with mold 20
Put on the instrument with mold 21
Clean the mold 22
Wash the mold 23
Thin tube (Corda miniFit) 24
Put on the instrument with thin tube 25
Clean the thin tube 26
Thin tube with dome or GripTip 28
Replace dome 29
Thin tube with micro mold or LiteTip 30
Maintain the micro mold or LiteTip 31
Optional features and accessories 32
Mute the hearing instrument (optional) 33
Change programs (optional) 34
Change volume (optional) 36
Tamper-resistant battery drawer (optional) 38
Wireless accessories (optional) 40
Other options (optional) 42
Warnings 44
Tinnitus SoundSupport™ (optional) 54
Troubleshooting guide 66
Water resistant 68
Warranty certicate 70
International warranty 71
Mobile phone 72
Technical information 74
6 7
About Start up Handling Options Warnings Tinnitus Additionals
Identify your hearing instrument style
and ear piece
There are two dierent
attachments and several
dierent ear pieces which
classify your hearing instrument
style. Please identify your
attachment and ear piece. This
will make it easier for you to
navigate through this booklet.
BTE with sound hook
and mold
An instrument with a sound
hook will have a mold as an
ear piece.
BTE with thin tube
(Corda miniFit)
An instrument with a
thin tube will have one of the
following ear pieces - dome,
GripTip, micro mold, or LiteTip.
Ear grip (optional)
Thin
tube
Mold
Tube
Sound
hook
Micro mold or LiteTip
Dome (Open dome shown)
GripTip
8 9
About Start up Handling Options Warnings Tinnitus Additionals
BTE with sound hook and mold
What it is What it does
Push button
Battery drawer
Sound hook Microphone
openings
Change
programs,
volume and
mute the
instrument
Contains the battery.
Battery drawer is the
on/o switch
Sound in
Sound out
10 11
About Start up Handling Options Warnings Tinnitus Additionals
BTE with thin tube (Corda miniFit)
What it is
Push button
Microphone
openings
What it does
Change
programs,
volume and
mute the
instrument
Contains the battery.
Battery drawer is also
the on/o switch
Sound in
Battery drawer
Sound out
Thin tube
12 13
About Start up Handling Options Warnings Tinnitus Additionals
Identify left and right instrument
It is important to distinguish between the left and the right
instrument as they might be programmed dierently.
Battery
Your hearing instrument is a miniature electronic device that runs on
special batteries. To activate the hearing instrument, you must insert
a new battery in the battery drawer. See how in the “Replace the
battery” section.
A RED indicator inside the
battery drawer marks the
RIGHT instrument
A BLUE indicator inside the
battery drawer marks the
LEFT instrument.
Battery drawer
Your instrument
battery size is 13
Pull out to open
14 15
About Start up Handling Options Warnings Tinnitus Additionals
Turn the hearing instrument on and o
The battery drawer is also used to switch the hearing instrument
on and o. To preserve the battery, make sure your instrument is
switched o when you are not wearing it.
When to replace a battery
When it is time to replace the battery you will hear two beeps
repeated in moderate intervals until the battery runs out.
Two beeps
= The battery is running low
Four beeps
= The battery has run out
Battery maintenance tip
To make sure the hearing instrument is always working bring spare
batteries with you, or replace the battery before you leave home.
Turn ON
Close the
battery
drawer with
the battery
in place.
Turn OFF
Open the
battery drawer
16 17
About Start up Handling Options Warnings Tinnitus Additionals
Replace the battery
2. Uncover 3. Insert
Fully open the
battery drawer.
Remove the
battery.
Remove the
sticky label from
the + side of the
new battery.
Insert the new
battery into the
battery drawer.
Make sure the
+ side faces up.
1. Remove
MultiTool
Close the battery drawer. The
instrument will play a jingle
through the ear piece.
Hold the earpiece close to your ear
to hear the jingle.
The MultiTool can be used for
battery change. Use the magnetic
end to remove and insert batteries.
The MultiTool is provided by
your Hearing Care Professional.
4. Close Tip
18 19
Caring for your hearing instrument
When handling your hearing instrument, hold it over a soft surface
to avoid damage if you drop it.
Clean the microphone openings
Carefully brush away debris from
the openings. Gently brush the surface.
Make sure the brush is not pressed
in to the openings.
About Start up Handling Options Warnings Tinnitus Additionals
IMPORTANT NOTICE
Use a soft, dry cloth to clean the hearing instrument. It must never be
washed or immersed in water or other liquids
Microphone
openings
The MultiTool
The MultiTool contains a brush and a wire loop for cleaning ear wax
from the mould. The brush can be replaced and purchased from your
Hearing Care Professional.
Brush
MagnetWire loop
Other manuals for Alta2 Pro Ti
5
This manual suits for next models
2
Table of contents
Other oticon Hearing Aid manuals
oticon
oticon Dynamo BTE13 SP User manual
oticon
oticon Acto User manual
oticon
oticon ConnectClip Instruction Manual
oticon
oticon Alta User manual
oticon
oticon miniRITE Alta2 User manual
oticon
oticon minirite User manual
oticon
oticon CIC P User manual
oticon
oticon Amigo R5 User manual
oticon
oticon Intiga i User manual
oticon
oticon Dual User manual
oticon
oticon Opn miniRITE User manual
oticon
oticon streamer User manual
oticon
oticon CIC/MIC User manual
oticon
oticon miniRITE T User manual
oticon
oticon CI-Link User manual
oticon
oticon Opn 1 User manual
oticon
oticon Agil User manual
oticon
oticon CROS miniRITE T User manual
oticon
oticon Intiga Rite User manual
oticon
oticon OPN User manual
