Omega PHCN-37 User manual
PHCN-37 and OPCN-37
Microprocessor-Based p Controller
and p /ORP Controller
omega.com
e-mail: [email protected]
For latest product manuals
omegamanual.info
User’s Guide
Shop on line at
USA
MADE IN
It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI regulations that apply.
OMEGA is constantly pursuing certification of its products to the European New Approach Directives. OMEGA will add the CE mark
to every appropriate device upon certification.
The information contained in this document is believed to be correct, but OMEGA Engineering, Inc. accepts no liability for any
errors it contains, and reserves the right to alter specifications without notice.
WARNING: These products are not designed for use in, and should not be used for, patient-connected applications.
!This device is marked with the international caution symbol. It is important to read the Setup Guide before installing or
commissioning this device as the guide contains important information relating to safety and EMC.
Servicing North America:
USA: One Omega Drive, P.O. Box 4047
ISO 9001 Certified Stamford CT 06907-0047
TEL: (203) 359-1660 FAX: (203) 359-7700
Canada: 976 Bergar
Laval (Quebec) 7L 5A1
TEL: (514) 856-6928 FAX: (514) 856-6886
For immediate technical or application assistance:
USA and Canada: Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA®
Customer Service: 1-800-622-2378 / 1-800-622-BEST®
Engineering Service: 1-800-872-9436 / 1-800-USA-W EN®
Mexico and TEL: (001)800-TC-OMEGA® FAX: (001) 203-359-7807
Latin America: En Español: (001) 203-359-7803
Servicing Europe:
Benelux: Postbus 8034, 1180 LA Amstelveen, The Netherlands
TEL: +31 20 3472121 FAX: +31 20 6434643
Toll Free in Benelux: 0800 0993344
Czech Republic: Frystatska 184, 733 01 Karviná
TEL: +420 59 6311899 FAX: +420 59 6311114
France: 11, rue Jacques Cartier, 78280 Guyancourt
TEL: +33 1 61 37 29 00 FAX: +33 1 30 57 54 27
Toll Free in France: 0800 466 342
Germany/Austria: Daimlerstrasse 26, D-75392 Deckenpfronn, Germany
TEL: +49 7056 9398-0 FAX: +49 7056 9398-29
Toll Free in Germany: 0800 639 7678
United Kingdom: One Omega Drive
ISO 9002 Certified River Bend Technology Centre
Northbank, Irlam Manchester M44 5BD United Kingdom
TEL: +44 161 777 6611 FAX: +44 161 777 6622
Toll Free in England: 0800 488 488
OMEGAnet® On-Line Service
www omega com
Internet e-mail
info@omega com
®
®
i
Preface
PREFACE
Manual Objectives
This manual shows you how to set up and use the Programmable Digital Meter.
Standard Procedures:
* Checking voltage jumpers, or changing voltage power
* Mounting the panel
* Configuring Temperature compensation
* Selecting a decimal point position
* Configuring calibration parameters
* Performing two or three-point calibration
* Setting the setpoint's active band
* Selecting a latched or unlatched operation
* Setting setpoint’s deadbands
* Enabling/disabling analog output
* Selecting analog output as current or voltage
* Scaling analog output
Preface
ii
Table A-1 Sections of the Manual
If you want to read about:
Unpacking; safety considerations
Meter description and features
Main board power jumpers; panel
mounting, sensor input, main power and
analog and relay output
Setpoint value, Temperature
compensation, decimal point position,
calibration, setpoint configuration;
setpoint deadbands, analog output
configuration and scaling
Setpoint values
Display messages
Meter menu/sub-menu messages
Setpoint configuration messages
Specifications
Factory Preset Values
1
2
3
4
5
6
7
8
9
10
Refer to section
Introduction
About the Meter
Getting Started
Configuring the Meter
Selecting Setpoint Values
Display Messages
Menu Configuration
Setpoint Configuration
Displays
Specifications
Factory Default
Setup as Shipped
iii
Preface
Table of Contents
Section Page
SEC 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
1.1 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
1.2 Safety Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
SEC 2 ABOUT THE METER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
2.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
2.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
2.3 Available Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
2.4 Front of the Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2.4.1 Meter Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
2.5 Front Panel Button Lockout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2.5.1 Jumper Lock Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2.5.2 Push Button Lock Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2.6 Back of Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
2.7 Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
SEC 3 GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
3.1 Rating/Product Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
3.2 Main Board Power Jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
3.3 Main Board Jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
3.4 Panel Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
3.5 Connecting Sensor Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
3.6 Connecting Main Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
3.7 Connecting Analog and Relay Outputs . . . . . . . . . . . . . . . . . . . . . . . . . .18
SEC 4 CONFIGURING THE METER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
4.0 Specifying Input Type (INPT) p /ORP Controllers Only . . . . . . . . . . . . .20
4.1 Selecting the Temperature Compensation Mode (A.T.C.) . . . . . . . . . . .20
4.2 Selecting a Decimal Point Position (DEC.P) . . . . . . . . . . . . . . . . . . . . . .21
4.3 Using Reading Configuration (RD.CF) . . . . . . . . . . . . . . . . . . . . . . . . . .22
4.4 Performing Two-Point Calibration (CAL.2) . . . . . . . . . . . . . . . . . . . . . . . .23
4.5 Performing Three-Point Calibration (CAL.3) . . . . . . . . . . . . . . . . . . . . . .24
Preface
iv
Table of Contents
Section Page
4.6 Using Setpoint 1 Configurations (S1.CF) . . . . . . . . . . . . . . . . . . . . . . . . .25
4.6.1 Setting Setpoint 1's Active Band . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
4.6.2 Selecting if Setpoint 1 is Latched or Unlatched . . . . . . . . . . . . . . . . . . . .25
4.6.3 Selecting Setpoint 1 (for p /ORP Controllers only) . . . . . . . . . . . . . . . . .25
4.7 Using Setpoint 2 Configuration (S2.CF) . . . . . . . . . . . . . . . . . . . . . . . . .26
4.7.1 Setting Setpoint 2's Active Band . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
4.7.2 Selecting if Setpoint 2 is Latched or Unlatched . . . . . . . . . . . . . . . . . . . .26
4.7.3 Selecting Setpoint 2 (for p /ORP Controllers only) . . . . . . . . . . . . . . . . .26
4.8 Setting the Setpoint 1 Deadband (S1.DB) . . . . . . . . . . . . . . . . . . . . . . . .27
4.9 Setting the Setpoint 2 Deadband (S2.DB) . . . . . . . . . . . . . . . . . . . . . . . .27
4.10 Using Output Configuration (OT.CF) . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
4.10.1 Enabling or Disabling the Analog Output . . . . . . . . . . . . . . . . . . . . . . . . .29
4.10.2 Selecting Analog Output as Current or Voltage . . . . . . . . . . . . . . . . . . . .29
4.10.3 Selecting Analog Output as p or ORP (for p /ORP Controllers only) . .30
4.11 Configuring Temperature (C or F-TEMP) . . . . . . . . . . . . . . . . . . . . . . . . .31
4.12 Using Output Scale and Offset (OT.S.O) . . . . . . . . . . . . . . . . . . . . . . . . .32
4.12.1 Example for Output Scale and Offset . . . . . . . . . . . . . . . . . . . . . . . . . . .34
SEC 5 SELECTING SETPOINT VALUES . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
SEC 6 DISPLAY MESSAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
SEC 7 MENU CONFIGURATION DISPLAYS . . . . . . . . . . . . . . . . . . . . . . . . . .37
SEC 8 SETPOINT CONFIGURATION DISPLAYS . . . . . . . . . . . . . . . . . . . . . . .40
SEC 9 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
SEC 10 FACTORY PRESET VALUES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
CE APPROVAL SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
v
Preface
List of Figures
Figure Page
2-1a Front of Meter - p Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2-1b Front of Meter - p /ORP Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2-2 ac Power Connector Label (with dc-Power Detail) . . . . . . . . . . . . . . . . . .9
3-1 Main Board Power Jumpers (W1, W2, W3) . . . . . . . . . . . . . . . . . . . . . .12
3-2 Main Board Jumper Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
3-3 Upper Isolated Analog Output Option Board Installation . . . . . . . . . . . . .13
3-4 Meter - Exploded View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
3-5 Panel Cut-Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
3-6 p and RTD Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
3-7 Main Power Connections - ac . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
3-8 Main Power Connections -dc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
3-9 Relay Output Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
3-10 Analog Output Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
3-11 Isolated Analog Output Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
4-1 Relay Output Triggering Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
9-1 Dimensions/Panel Cutout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
List of Tables
Table Page
A-1 Sections of the Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ii
2-1 Accessories and Add-Ons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
2-2 Connector Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
3-1 Jumper Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
3-2 ac-Power Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
6-1 Display Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
7-1 Configuration Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
7-2 Run Mode Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
8-1 Setpoint Configuration Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
10-1 Factory Preset Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
NOTES, WARNINGS and CAUTIONS
Information that is especially important to note is identified by three labels:
• NOTE
• WARNING
• CAUTION
• IMPORTANT
NOTE: provides you with information that is important to successfully setup and
use the Programmable Digital Meter.
CAUTION or WARNING: tells you about the risk of electric shock.
CAUTION, WARNING or IMPORTANT: tells you of circumstances or practices
that can effect the meter's functionality and must refer to accompanying
documents.
TIP: Provides you helpful hints.
Preface
vi
1
Introduction 1
SECTION 1 INTRODUCTION
1 1 UNPACKING
Remove the Packing List and verify that all equipment has been received. If there are
any questions about the shipment, use the phone number for the Customer Service
Department nearest you.
Upon receipt of shipment, inspect the container and equipment for any signs of damage.
Take particular note of any evidence of rough handling in transit. Immediately report any
damage to the shipping agent.
The carrier will not honor any claims unless all shipping material is saved for
their examination. After examining and removing contents, save packing
material and carton in the event reshipment is necessary.
Verify that you receive the following items in the shipping box:
QTY DESCRIPTION
1Programmable Digital Meter indicator/controller with all applicable
connectors attached.
1Owner's Manual
1Set Mounting brackets
If you ordered any of the available options (except the “BL” blank Lens
option), they will be shipped in a separate container to avoid any damage to
your indicator/controller.
For first-time users: Refer to the QuickStart Manual for basic operation and
set-up instructions.
1Introduction
2
1 2 SAFETY CONSIDERATIONS
This device is marked with the international caution symbol. It is important to
read this manual before installing or commissioning this device as it contains
important information relating to Safety and EMC (Electromagnetic Compatibility).
This instrument is a panel mount device protected in accordance with EN 61010-
1:2001, electrical safety requirements for electrical equipment for measurement, control
and laboratory. Installation of this instrument should be done by qualified personnel. In
order to ensure safe operation, the following instructions should be followed.
This instrument has no power-on switch. An external switch or circuit-breaker shall
be included in the building installation as a disconnecting device. It shall be marked to
indicate this function, and it shall be in close proximity to the equipment within easy
reach of the operator. The switch or circuit-breaker shall not interrupt the Protective
Conductor (Earth wire), and it shall meet the relevant requirements of IEC 947–1 and
IEC 947-3 (International Electrotechnical Commission). The switch shall not be
incorporated in the main supply cord.
Furthermore, to provide protection against excessive energy being drawn from the
main supply in case of a fault in the equipment, an overcurrent protection device shall
be installed.
• Do not exceed voltage rating on the label located on the top of the instrument
housing.
• Always disconnect power before changing signal and power connections.
• Do not use this instrument on a work bench without its case for safety reasons.
• Do not operate this instrument in flammable or explosive atmospheres.
• Do not expose this instrument to rain or moisture.
• Unit mounting should allow for adequate ventilation to ensure instrument does not
exceed operating temperature rating.
• Use electrical wires with adequate size to handle mechanical strain and power
requirements. Install without exposing bare wire outside the connector to minimize
electrical shock hazards.
EMC Considerations
• Whenever EMC is an issue, always use shielded cables.
• Never run signal and power wires in the same conduit.
• Use signal wire connections with twisted-pair cables.
• Install Ferrite Bead(s) on signal wires close to the instrument if EMC problems
persist.
Failure to follow all instructions and warnings may result in injury!
Note ☞
Other manuals for PHCN-37
1
This manual suits for next models
1
Table of contents
Other Omega Controllers manuals
Omega
Omega i Series User manual
Omega
Omega CNiS16 User manual
Omega
Omega i Series User manual
Omega
Omega CNI16D User manual
Omega
Omega MICROMEGA CN77000 series User manual
Omega
Omega DP25-TC Operating and maintenance instructions
Omega
Omega CN38S User manual
Omega
Omega CSi32 User manual
Omega
Omega CNI16D User manual
Omega
Omega LINKR-M1 User manual
Omega
Omega i Series User manual
Omega
Omega CCT-80 Series User manual
Omega
Omega CNiS16D User manual
Omega
Omega CNI16 User manual
Omega
Omega FMA 5400A User manual
Omega
Omega OMB-PER-488/W95 User manual
Omega
Omega CN16Pt User manual
Omega
Omega CN4420 Series User manual
Omega
Omega i-SERIES User manual
Omega
Omega DPF700 User manual
Popular Controllers manuals by other brands
Digiplex
Digiplex DGP-848 Programming guide
YASKAWA
YASKAWA SGM series user manual
Sinope
Sinope Calypso RM3500ZB installation guide
Isimet
Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions
LSIS
LSIS sv-ip5a user manual
Rockwell Automation
Rockwell Automation 1769-L31 installation instructions
