Oki C5400 Series User manual
Every effort has been made to ensure that the information in this
document is complete, accurate, and up-to-date. Oki Data assumes no
responsibility for the results of errors beyond its control. Oki Data also
cannot guarantee that changes in software and equipment made by
other manufacturers and referred to in this guide will not affect the
applicability of the information in it. Mention of software products
manufactured by other companies does not necessarily constitute
endorsement by Oki Data.
© 2004 by Oki Data Americas, Inc. All rights reserved.
Written and produced by the Oki Data Training & Publications
Department. Please address any comments on this publication to:
Training & Publications Dept.
Oki Data Americas, Inc.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
For the latest product information, printer drivers, manuals, special
offers, etc., go to http://my.okidata.com.
OKI is a registered trademark/marque déposée/marca registrada Oki Electric
Industry Company, Ltd. Macintosh is a trademark of Apple Computer, Inc.,
registered in the U.S. and other countries. Windows is either a registered
trademark or trademark of Microsoft Corporation in the United States and
other countries.
1
Overview
Your Model C5400 Upgrade Kit provides a Postscript emulation driver
for Macintosh®and Windows®systems, in addition to the PCL driver for
Windows systems. It also activates the Ethernet port so you can use your
printer on a network.
Installing the kit involves four steps:
•Step 1: Uninstall the C5400 PCL Printer Driver (Windows only) . . p. 2
•Step 2: Install the New DIMM in the Printer . . . . . . . . . . . . . . . . . . p. 3
•Step 3: Make the Network Connection, if applicable . . . . . . . . . . . p. 11
•Step 4: Configure the Network and/or Install Printer Driver(s) . . . p. 12
Caution!
To avoid damage by static electricity or rough handling, keep the DIMM
board in its packaging until you're ready to install it.
Note: You will need a Phillips bit screwdriver to install the kit.
2
Step 1: Uninstall the C5400 PCL Driver
Windows Operating Systems Only
Windows XP and 2000.
1. Click Start →Settings →Printers [Printers and Faxes for XP].
2. Click the C5400 PCL driver, then click File →Delete.
3. Click Ye s to confirm the deletion.
4. Click File →Server Properties.
5. On the Drivers tab, select the C5400 PCL printer driver and click
Remove.
6. Click Ye s to confirm the deletion, then click Close.
7. Close the dialog box.
8. Restart your computer.
Windows Me, 98, 95B, NT 4.0
1. Click Start →Settings →Printers.
2. Click the C5400 PCL driver, then click File →Delete.
3. Click Ye s to confirm the deletion
4. Close the Printers dialog box.
5. Restart your computer.
3
Step 2: Install the New DIMM
1. Use the control panel to print out the MenuMap:
a. Press +one or more times until INFORMATION MENU appears.
b. Press ENTER twice and wait for the 2-page MenuMap to print.
c. Note that C5400 shows at the top of the MenuMap.
2. Prepare the printer:
• Turn off the printer (1).
• Unplug the power cord (2).
• Detach the interface cable (3)—a= USB, b= parallel.
3. Open the top cover.
4
4. Open the front cover.
5. Loosen the thumbscrew holding the printer side cover in place.
6. Lift up on the ends and remove the side panel from the printer.
5
7. Locate the DIMM to be replaced.
8. Push out the lock tabs at either end of the DIMM and remove it.
Caution!
To avoid damage, ground yourself (touch metal) before handling DIMMs.
9. Remove the new DIMM from its shipping package.
6
10. Hold the DIMM with the narrower metallic contact edge (1) to the
right, and insert it straight into the socket, pushing in until you hear
the lock tabs on either side snap into place.
Caution!
Keep the DIMM at a 90° angle to the printer:
Push the DIMM in straight:
7
11. Replace the side panel on the printer and secure it in place with the
thumbscrew.
12. Close the front cover.
13. Close the top cover.
8
14. Loosen the screw and remove the cover (1) from the Ethernet port on
the back of the printer.
15. If you will be using the same computer connection rather than the
newly available Ethernet connection, reattach the computer interface
cable—USB (a) or parallel (b). Otherwise, skip this step.
Note: Making the Ethernet connection is covered on p. 11.
Other manuals for C5400 Series
8
Table of contents
Other Oki Printer manuals
Oki
Oki Microline 320 User manual
Oki
Oki Microline 182 User manual
Oki
Oki OKIPAGE 10e Guide
Oki
Oki C3400n User manual
Oki
Oki ML421 Series Service manual
Oki
Oki C9500 Series User manual
Oki
Oki LE810DT User manual
Oki
Oki C821 User manual
Oki
Oki C110 User manual
Oki
Oki C610dn Operating and maintenance instructions
Oki
Oki C7200 User manual
Oki
Oki B6500 Series Installation instructions
Oki
Oki C9500dxn User manual
Oki
Oki MPS610c Service manual
Oki
Oki IP-6620 User manual
Oki
Oki C9600hdn User manual
Oki
Oki C831 User manual
Oki
Oki proColor Pro910 Series User manual
Oki
Oki C5400n User manual
Oki
Oki T410 Original instructions
