Nortel AccessNode 2016 User manual

P0905277

AccessNode Products

AN2016 Cabinet

User Guide

Standard Rel 1.0 May 1999

What’s inside...

Cabinet introduction

Equipment

Installation guidelines

Alarms

Maintenance

Ordering information

The information contained herein is the property of Nortel and is strictly confidential. Except as expressly authorized in writing by

Nortel,theholdershallkeep all information contained hereinconfidential,shall disclose it onlyto its employeeswith a need to know,

and shall protect it, in whole or in part, from disclosure and dissemination to third parties with the same degree of care it uses to

protect its own confidential information, but with no less than reasonable care. Except as expressly authorized in writing by Nortel,

the holder is granted no rights to use the information contained herein.

Nortel Networks is a trademark of Northern Telecom.

Helios is a trademark of Astec Advanced Power Systems, Ltd.

Printed in Canada

User Guide Rel 1.0 Standard May 1999

iii

Contents

About this document vii

Cabinet introduction 1-1

AN2016 cabinet description 1-1

Applications 1-2

Basic cabinet configuration 1-2

Equipment 2-1

AN2016 cabinet structure 2-5

Cabinet physical design 2-5

Exterior 2-5

Doors 2-6

Cable access ports 2-6

Heat exchanger system 2-7

Environmental control unit 2-7

Cable routing brackets 2-10

Equipment compartment 2-10

Equipment 2-10

AC compartment 2-12

AC load center 2-13

Battery distribution and disconnect panel 2-14

VF protection 2-14

Ground bar 2-14

Optical fiber cable entrance 2-15

Surge protection center and termination compartment 2-16

SPC and termination compartment equipment 2-16

Ground bar 2-16

Battery compartment 2-17

Battery heater pad 2-17

External battery vault 2-17

Equipment application and configuration 2-20

Applications 2-20

Basic equipment configuration 2-21

672-line AccessNode system 2-21

864-line AccessNode system 2-23

1344-line AccessNode system 2-25

2016-line AccessNode system 2-27

AccessNode equipment descriptions 2-29

AN2016 Cabinet User Guide Rel 1.0 Standard May 1999

Equipment layout 2-30

Access bandwidth manager shelf 2-32

Breaker interface panel 2-34

Local craft access panel 2-35

Copper-distribution shelf 2-36

Equipment fan shelves 2-38

Fan alarms 2-38

Peripheral equipment descriptions 2-39

Rectifiers 2-39

Batteries 2-41

DC distribution shelf 2-41

DSX-1 cross-connect facilities 2-43

Repeater/span DS1 termination facilities 2-48

Mechanical specifications 2-48

Operational specifications 2-49

Environmental control 2-49

Acoustic noise 2-49

Temperature 2-50

Relative humidity 2-50

Altitude 2-50

Altitude conditions and limits 2-51

Regulatory specifications 2-51

Additional information 2-53

Power and grounding 2-53

Alternating current power entrance 2-53

Direct current power requirements 2-53

Battery backup 2-54

Power consumption 2-54

Grounding 2-54

Installation guidelines 3-1

Procedures in this chapter 3-1

3-1 Unpacking the cabinet 3-2

3-2 Selecting the site 3-3

3-3 Preparing a concrete mounting pad for the cabinet 3-4

3-4 Preparing the cabinet for installation 3-12

3-5 Routing the cables to the mounting pad 3-18

3-6 Mounting the cabinet on the pad 3-21

3-7 Leveling the cabinet 3-24

3-8 Installing the cable in the split sleeve 3-26

3-9 Connecting the earth ground to the cabinet 3-28

3-10 Installing the surge arrestor 3-32

3-11 Connecting ac power 3-34

3-12 Installing batteries 3-37

3-13 Installing battery cables from an external vault 3-42

Alarms 4-1

Alarm block location and description 4-1

Alarms definitions 4-3

AC fail alarm 4-3

User Guide Rel 1.0 Standard May 1999

Battery on discharge alarm 4-3

Fuse alarm 4-3

Low voltage alarm 4-3

High voltage shutdown alarm 4-3

Rectifier failure alarm minor 4-3

Rectifier failure alarm major 4-3

Battery distribution panel alarm 4-3

High temp alarm 4-3

Door intrusion alarm 4-3

Remote measurement unit alarm 4-3

DDM + alarm 4-4

Soneplex loop extender alarm 4-4

Alarm connections 4-4

Procedure in this chapter 4-5

4-1 Connecting the alarms 4-6

Maintenance 5-1

Procedures in this chapter 5-1

5-1 Installing the rectifiers 5-2

5-2 Control card replacement 5-4

5-3 Replacing a rectifier 5-5

5-4 Heat exchanger maintenance 5-6

5-5 Replacing the fan 5-7

5-6 Replacing the ECU 5-13

5-7 Starting up the ECU 5-17

5-8 Connecting the fan shelves to the ECU 5-19

Ordering information 6-1

Standard equipment (672 lines) 6-1

Standard equipment (864 lines) 6-23

Standard equipment (1344 lines) 6-30

Standard equipment (2016 lines) 6-36

Optional equipment 6-40

Recommended replacement parts 6-48

AN2016 Cabinet User Guide Rel 1.0 Standard May 1999

User Guide Rel 1.0 Standard May 1999

vii

About this document

This document describes the following aspects of the Nortel Networks

AccessNode 2016 outside plant (OSP) cabinet (AN2016 Cabinet):

• cabinet introduction

• equipment

• installation

•alarms

• maintenance

• ordering information

Audience The audience for this document includes the following groups:

• maintenance technicians and experienced installers

• strategic and current planners

• facility and circuit provisioners

• transmission engineers

• network administrators

• outside plant personnel for the AN2016 Cabinet

How to use this document

It is recommended that you first read this section, then read Chapter 1,

“Cabinet introduction,” and Chapter 2, “Equipment.” These chapters will give

you a good understanding of the cabinet.

Then, you can read the other chapters according to your needs and interests to

learn about the cabinet specifications and other features of the AN2016 OSP

Cabinet.

viii

AN2016 Cabinet User Guide Rel 1.0 Standard May 1999

References in this document

This document refers to these documents from the following product libraries:

• AccessNode, Release AN16 or later:

—Engineering and Ordering Information, 323-3001-032

—Ordering Spare Parts, 323-3001-151

—Configuration and Equipment Description, 323-3001-100

—Features and Services Description, 323-3001-101

—Signal Flow and Circuit Pack Description, 323-3001-102

• Helios System 200/48, Release 4.0 or later:

—Description, Installation, Operation and Maintenance Manual,

167-9021-109

• MPR25/MPR15 Series, Single Phase -48 V, 25A Switch Mode Rectifier

NT5C06B/C, Release 7.0 or later:

—Description, Installation, Operation and Maintenance Manual,

169-2071-500

• Bellcore standards:

— FR-440, Functional criteria for digital loop carrier systems, Issue 02,

January 1997, TR-NWT-000057

— GR-63-CORE, NEBS requirements for physical protection, Issue 01,

October 1995

—GR-487-CORE, Generic requirements for electronic equipment

cabinets, Issue 01, June 1996

— GR-1089-CORE, Electromagnetic compatibility and electric safety

generic criteria for network telecommunications equipment

Warnings and safety precautions

To avoid injury, follow all danger warnings provided with this product and

safety procedures established by your company.

To avoid damage to equipment or service interruptions, follow all caution

warnings provided with this productand safety procedures established by your

company.

User Guide Rel 1.0 Standard May 1999

Samples of danger and caution warnings follow.

Static electricity

Static electricity can accumulate on the body if you walk a short distance. This

static electricity damages some circuit packs and cards if you do not discharge

it. Always place or package circuit packs and cards in antistatic material.

Storing and transporting circuit packs or cards

When you store or transport circuit packs or cards, follow these rules:

• Always place the circuit packs or cards in their antistatic material before

transporting or stacking them.

• Do not store circuit packs or cards where the relative humidity can exceed

95% and temperature can exceed 70° C.

DANGER

Risk of personal injury

A danger warning highlights a risk of personal injury.

CAUTION

Risk of service interruption or equipment damage

A caution warning highlights a risk of service interruption

or equipment damage.

DANGER

Risk of electric shock

This warning highlights a possible electrical hazard. Proceed

with care to avoid personal injury.

CAUTION

Risk of equipment damage

To avoid damaging electronic parts, wear a grounded

antistatic wrist strap or equivalent protection when

you handle circuit packs or cards.

AN2016 Cabinet User Guide Rel 1.0 Standard May 1999

This manual suits for next models

Table of contents

Other Nortel Network Hardware manuals

Nortel

Nortel Meridian 1 Option 11C Compact Use and care manual

Nortel

Nortel 9115 User manual

Nortel

Nortel BCM200 Installation guide

Nortel

Nortel 2230l 2231 User manual

Nortel

Nortel R2MFC Operator's manual

Nortel

Nortel BCM200 Product manual

Nortel

Nortel Passport 8683POS Guide

Nortel

Nortel 2340 User manual

Nortel

Nortel Norstar ICS Parts list manual

Nortel

Nortel BayStack 600 Series Instruction Manual

Nortel

Nortel BayStack 650 User manual

Nortel

Nortel Passport 4430 User manual

Nortel

Nortel BayStack 100-S Instruction Manual

Nortel

Nortel IVR 2.5/S User manual

Nortel

Nortel HomeOffice II User manual

Nortel

Nortel CS 1000M HG User manual

Nortel

Nortel 5000 Instruction Manual

Nortel

Nortel 2600 User manual

Nortel

Nortel NAC User manual

Nortel

Nortel Optical Multiservice Edge 6130 Technical manual

Nortel

Nortel Meridian SL-100 User manual

Nortel

Nortel 1800 Instruction Manual

Nortel

Nortel 2340 User manual

Nortel

Nortel Remote Office 9150 Instruction Manual

Popular Network Hardware manuals by other brands

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL product manual

B&B Electronics

B&B Electronics ZXT9-IO-222R2 product manual

Yudor

Yudor YDS-16 user manual

D-Link

D-Link ShareCenter DNS-320L datasheet

Samsung

Samsung ES1642dc Hardware user manual

Honeywell Home

Honeywell Home LTEM-PV Installation and setup guide

evertz

evertz 7700 Series manual

D-Link

D-Link ShareCenter DNS-343 Quick installation guide

Asante

Asante AsanteBridge 1012 user guide

FireBrick

FireBrick FB2700 user manual

Audiovox Electronics

Audiovox Electronics ARWH2T user manual

ADC

ADC DSX-1 Operational Procedures Guide

NetComm

NetComm NF2 user guide

Alcatel-Lucent

Alcatel-Lucent 5620 user guide

Dell EMC

Dell EMC XC6420 Series Solution guide

Lanner

Lanner NCA-1020A user manual

Allied Telesis

Allied Telesis AT-TN121-A Specifications

Arista

Arista CCA-ETM-Q12 quick start guide