Njoy UPCSBLS665TRPCG01B User manual
Renton 650
Renton 650 PLUS User Manual
Manual de utilizare
UPCSBLS665TRECG01B
UPCSBLS665TRPCG01B
028.32.21.1Before using this product, carefully read all product documentation and retain it for future reference.
02
UPS Unit
User Manual
Power Cord (attached)
Package Contents
1
Thank you for purchasing our products!
Please read this manual before using the product.
nJoy is a brand of power and backup protection products
that create solutions for multiple levels of environment
complexity, residential to industrial.
NOTE: Before installation, please inspect the unit. Be sure
that nothing inside the package is damaged.
This UPS will protect your electronic equipment from
physical damage and will provide emergency battery
backup power to prevent data loss in the event of power
problems.
03
Product Overview
2
Renton is a line-interactive UPS with auto-restart
function and LED indicators for you to monitor the
status at every moment. Renton packs high protection
in a compact device with 4 Schuko outlets connected to
the internal battery and a fast-charge USB* Type-C 30W
that is ideal for achieving short charging times for your
gadgets. Renton ts perfectly in any house and its built-
in AVR will protect devices from power surges.
Front View
Side View
1. Power Button
2. Led Indicators
3. USB Charger Ports-Type C
30W *(650 Plus only)
4. USB Charger Ports-Type A
(650 Plus only)
5. Battery Backup Outlets
6. Input power cord
2
3
4
1
56
English
Română
04
Installation3
The UPS can protect your equipment from all power
problems such as surge, spikes, blackouts and brownouts.
When AC power is present and the ON/OFF button is
turned ON, the UPS is always charging the battery and
provides power to the equipment from AC line directly.
A reliable built-in battery can provide stable power in
order for you to complete your work, save your data
and safely shut down your system when there is a utility
power blackout.
Connecting your equipment and rst usage
3.1
The UPS is simple to operate and install. Please read
the following steps before connecting any equipments
to this UPS:
Step 1. Connect the UPS to a grounded AC power
outlets.
Step 2. Please turn ON the ON/OFF button and charge
the battery at least 8 hours for a full load
before you start to use the UPS.
Step 3. Plug your PC or peripheral equipment (printer,
TV, scanner, fax, speakers etc.) into the power
outlets of the UPS (these will provide emergency
battery backup power during mains blackouts as
well as surge protection from surges and spikes).
05
English
Română
Operation
4
1. Power Button
Press the button for 2 seconds to turn
the UPS ON/OFF
1.1Short press the power button twice to enable
disable the sound alarm
2. LED Indicators
Do NOT plug
LASER PRINTERS
into any of the
outlets.
Do NOT plug any
SURGE STRIPS
into any of the
outlets.
CAUTION
These LEDs work in dierent combinations
under dierent UPS statuses, please refer
to “LED INDICATORS” section.
For optimal ventilation of the UPS, please place it 15cm
distance from any wall or object
Positioning
3.2
06
LED indicators5
LED Status Alarm
Normal Mode Green LED ON O
AVR Mode Green LED blinking
every 2 sec O
Battery Discharge Yellow LED ON Beep once every 30 seconds
Battery Low Yellow LED blinking every 2 sec
+ Red LED blinking every 2 sec Beep once every 2 seconds
Overload Red LED ON Beep once every 0.5 seconds
Standby mode all LEDs OFF O
Fault all LEDs ON Continuous alarm
3. USB Charger Ports-Type C(650 Plus only)
Provides 5V/3A 9V/3A 15V/2A to
charge external batteries.
4. USB Charger Ports-Type A(650 Plus only)
Provide 5V/3A 9V/2A 12V/1.5A to charge
external batteries.
5. Battery Backup Outlets
Provide battery backup and surge protection.
They ensure power is provided to connected
equipment over a period of time during a
power failure.
6. Input power cord
Connect to utility power.
07
English
Română
Place the UPS indoors in an area that has adequate
airow and no excessive dust. Do NOT allow the
UPS to be exposed to moisture, rain, excessive
heat or direct sunlight.
The use of the UPS is NOT recommended in
life support applications where failure of this
equipment can reasonably be expected or when
its safety or eectiveness could be aected
signically.
Do not plug the UPS input into its own output.
Please always disconnect the input power cord
from the wall outlet before replacing the battery.
Do NOT dispose of the battery in a re. The
battery may explode.
Do NOT open or damage the battery. It contains
an electrolyte that is toxic and harmful to the skin
and eyes.
Proper disposal of the battery is required. Please
follow your local laws/regulations regarding
battery disposals.
Use tools with insulated handles to replace the
battery to avoid personal injury. Due to energy
hazard, please remove wrist watches and hand
jewerly when replacing the battery.
Important Safety Warnings
6
08
Problem Possible Cause Solutions
The UPS does not
perform expected
runtime
Batteries are not
fully charged.
Recharge the battery by
leaving the UPS plugged in.
Battery is slightly
worn out. Contact Technical Support.
The UPS will not
turn on.
The on/o button
is designed to
prevent damage by
rapidly turning it
o and on.
Turn the UPS o. Wait 10
seconds and then turn the
UPS on.
The unit is not
connected to an
AC outlet.
The unit must be
connected to a 230Vac
50/60Hz outlet.
The battery is
worn out. Contact Technical Support.
Mechanical
problem. Contact Technical Support.
Outlets do not
provide power to
equipment
Batteries are
discharged
Allow the unit to recharge
for at least 8 hours.
Unit has been
damaged by a
surge or spike.
Contact Technical Support.
Alarm sounding Utility Failure
The audible alarm can be
turned OFF or ON by quickly
pressing the POWER button
twice. The default setting
for the alarm is ON.
Note: The UPS is making 2 short
beeps when the alarm is turned
OFF and 1 short beep when is
turned back ON.
Troubleshooting7
09
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with
separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not
be treated as household waste.
Instead it shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product.
The recycling of materials will help to conserve natural resources.
English
Română
10
UPS-ul vă protejează echipamentele electronice de daune
zice și oferă o baterie de rezervă pentru a preveni
pierderile de date în cazul întreruperilor accidentale ale
energiei electrice.
Mulțumim pentru că ați ales produsele noastre!
Vă rugăm citiți manualul de utilizare înainte de a pune în
funcțiune acest produs.
nJoy este un brand de solutii UPS dedicate protectiei si
rezervei de energie din diferite medii de utilizare, de la
rezidential la industrial.
Unitatea UPS
Manual de utilizare
Cablu de alimentare (atasat unității)
Conținutul pachetului
1
NOTĂ: Înainte de instalare, vericați produsul. Asigurați-vă
că nimic din pachet nu este deteriorat.
This manual suits for next models
3
Table of contents
Languages:
Other Njoy UPS manuals
Njoy
Njoy Balder Series User manual
Njoy
Njoy Keen Series User manual
Njoy
Njoy Shed 625 User manual
Njoy
Njoy Balder Series User manual
Njoy
Njoy Aira 600 User manual
Njoy
Njoy Balder Series User manual
Njoy
Njoy Cadu Series User manual
Njoy
Njoy Ranger Series User manual
Njoy
Njoy Argus Series User manual
Njoy
Njoy Alvis Series User manual
Njoy
Njoy Garun Series User manual
Njoy
Njoy Septu Series User manual
Njoy
Njoy Cadu 650 User manual
Njoy
Njoy Eris 600 User manual
Njoy
Njoy Aten PRO Series User manual
Njoy
Njoy Balder 1500 User manual
Njoy
Njoy Keen Series User manual
Njoy
Njoy Garun 30KL User manual
Njoy
Njoy Aster Series User manual
Njoy
Njoy Ranger Series User manual
