Njoy PWUP-OL300AT-AZ01B User manual

Aten Series User Manual

Manual de utilizare

PWUP-OL300AT-AZ01B

PWUP-OL200AT-AZ01B

PWUP-OL100AT-AZ01B

v. 1

Before using this product, carefully read all product documentation and retain it for future reference.

The following models belong to the Aten Series:

Aten 1000L

Aten 2000L

Aten 3000L

1000VA

2000VA

3000VA

This UPS will protect your electronic equipment from

physical damage and will provide emergency battery backup

power to prevent data loss in the event of power problems.

Thank you for purchasing our products!

Please read this manual before using the product.

Focusing on quality at competitive prices, nJoy

designs consumer products for a better and

enjoyable way into the digital world.

UPS Unit.

User Manual.

USB Cable.

Management Software CD.

Power Cord.

Package Contents

Product Overview

Front View

LCD panel

English

Română

LCD Panel

1. Input & Battery Voltage Info

2. Remaining Backup Time Info

3. Fault Info

4. Mute Operation

5. Output & Battery Voltage Info

6. Battery mode indicator

7. Load Info

8. Mode Operation Info

3 4

Back View

1000L

1. AC input

2. Input circuit breaker

3. USB communication port

4. RS-232 communication port

5. Output receptacles

6. SNMP web card intelligent

slot (optional - can be installed

by user any time)

2000L

3000L

English

Română

Please comply with all warnings and operating instructions

in this manual strictly. Save this manual properly and

carefully read the following instructions before installing

the unit. Do not operate this unit before reading through all

safety information and operating instructions carefully:

Important Safety Warnings3

Transportation

• Please transport the UPS system only in the original

package to protect against shock and impact.

Preparation

• Condensation may occur if the UPS system is moved

directly from cold to warm environment. The UPS

system must be absolutely dry before being installed.

Please allow at least two hours for the UPS system to

acclimate to the environment.

• Do not install the UPS system near water or in moist

environments.

• Do not install the UPS system where it would be

exposed to direct sunlight or near heat sources.

• Do not block ventilation holes in the UPS housing.

Installation

• Do not connect appliances or devices which would

overload the UPS system (e.g. laser printers) to the

UPS output sockets.

• Place cables in such a way that no one can step on or

trip over them.

• Do not connect domestic appliances such as hair

dryers to UPS output sockets.

• The UPS can be operated by any individuals with no

previous experience.

• Connect the UPS system only to an earthed shockproof

outlet which must be easily accessible and close to the

UPS system.

• Please use only VDE-tested, CE-marked mains cable

(e.g. the mains cable of your computer) to connect the

UPS system to the building wiring outlet (shockproof

outlet).

• Please use only VDE-tested, CE-marked power cables

to connect the loads to the UPS system.

• When installing the equipment, it should ensure that

the sum of the leakage current of the UPS and the

connected devices does not exceed 3.5mA.

Operation

• Do not disconnect the mains cable on the UPS system

or the building wiring outlet (shockproof socket

outlet) during operations since this would cancel

the protective earthing of the UPS system and of all

connected loads.

• The UPS system features its own, internal current

source (batteries). The UPS output sockets or output

terminals block may be electrically live even if the UPS

system is not connected to the building wiring outlet.

• In order to fully disconnect the UPS system, ﬁrst press

the OFF/Enter button to disconnect the mains.

• Prevent ﬂuids or other foreign objects from entering

English

Română

the inside of the UPS system.

Maintenance, service and faults

• The UPS system operates with hazardous voltages.

Repairs may be carried out only by qualiﬁed

maintenance personnel.

• Caution - risk of electric shock. Even after the unit is

disconnected from the mains (building wiring outlet),

components inside the UPS system are still connected

to the battery and electrically live and dangerous.

• Before carrying out any kind of service and/or

maintenance, disconnect the batteries and verify that

no current is present and no hazardous voltage exists

in the terminals of high capability capacitor such as

BUS-capacitors.

• Only persons are adequately familiar with batteries

and with the required precautionary measures

may replace batteries and supervise operations.

Unauthorized persons must be kept well away from

the batteries.

• Caution - risk of electric shock. The battery circuit

is not isolated from the input voltage. Hazardous

voltages may occur between the battery terminals

and the ground. Before touching, please verify that no

voltage is present!

• Batteries may cause electric shock and have a high

short-circuit current. Please take the precautionary

measures speciﬁed in this manual and any other

measures necessary when working with batteries:

remove wristwatches, rings and other metal objects,

use only tools with insulated grips and handles.

• When changing batteries, install the same number

and same type of batteries.

• Do not attempt to dispose of batteries by burning

them. This could cause battery explosion.

• Do not open or destroy batteries. Escaping electrolyte

can cause injury to the skin and eyes. It may be toxic.

• Please replace the fuse only with the same type and

amperage in order to avoid ﬁre hazards.

• Do not dismantle the UPS system.

Installation4

The UPS can protect your equipment from all

power problems such as surges, spikes, blackouts,

brownouts and line noise. When AC power is present

and the ON/Mute switch is turned ON, the UPS will

provide pure and stable AC power to the output. The

UPS will also charge the battery in the on-line mode.

The UPS is simple to install and operate. Please

read the following steps before connecting any

equipments to this UPS:

English

Română

Connecting your equipment and ﬁrst usage4.1

Step 1. Connect the UPS to a grounded AC power

outlet.

Step 2. UPS Output Connection: simply connect

devices to the outlets.

Step 3. Turn on the UPS: Press the ON/Mute button

on the front panel for two seconds to power

on the UPS. The battery charges fully during

the ﬁrst 5 hours of normal operation. Do not

expect full battery run capability during this

initial charge period.

Step 4. Plug your PC or peripheral equipment

(printer, tv, scanner, fax, speakers etc.) into

the power outlets of the UPS (these will provide

emergency battery backup power during power

blackouts as well as surge protection from surges

and spikes).

Step 5. Communication connection: To allow for

unattended UPS shutdown/start-up and

status monitoring, connect the

communication cable on one end to the USB

port and the other to the communication port

of your PC. With the monitoring software

This manual suits for next models

Table of contents

Languages:

Popular UPS manuals by other brands

Pylontech

Pylontech Victron & Pylontech US5000 manual

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 user manual

Mecer

Mecer ME-1000-WTU user manual

Mustek

Mustek PowerMust 530(B) Plus Startup manual

Emerson

Emerson Liebert NXL series Operation and maintenance manual

MAKELSAN

MAKELSAN BOXER SERIES user manual

Block

Block PC-0524-400-0 manual

CyberPower

CyberPower CP585LCD user manual

Eaton

Eaton 3S Advanced user's guide

CyberPower

CyberPower Office Tower Series UPS 1000 user manual

CyberPower

CyberPower BM100 quick start guide

Best Power

Best Power 610 quick start guide

Best Power

Best Power Unity/I UT3K user manual

Mustek

Mustek PowerMust 400 Offline user manual

Xantrex

Xantrex Trace 512 UR-UPS owner's manual

Forza

Forza SL-1501UL user manual

LEGRAND

LEGRAND keor 310081 quick start guide

ABB

ABB Conceptpower DPA 500 operating manual