1.1.2 General Cautions
Observe these cautions when operating or servicing this equipment:
•
If this equipment is used in a manner not specified in this manual, the protection
provided by this equipment may be impaired.
•
To prevent damage to equipment when replacing fuses, locate and correct the
problem that caused the fuse to blow before re-applying power.
•
Do not block ventilation openings of any instrument.
•
Use only the specified replacement parts.
•
Follow precautions for static sensitive devices when handling electronic equipment.
•
To prevent damage to the equipment, read the instructions in the equipment manual
for proper input voltage.
•
Adhere to good laser safety practices when using this equipment.
1.1.3 Laser Safety Information
The femtoFBG is designed and manufactured for the fabrication of fiber Bragg gratings
by means of femtosecond laser direct writing. And it is not sold, nor intended for, nor
should ever be used for any other purpose. The product should be used solely in
accordance with the instructions provided. Class IV lasers must be used for proper
function. Eye safety is of the greatest concern and the direct eye contact with a laser
beam can cause serious damage and possible blindness. Therefore general laser safety
rules should always be observed when working with lasers and laser related
instrumentation:
•
Wear appropriate protective eyewear at all times. The eyewear selection depends on
the wavelength and the intensity of the radiation, the conditions of use, and the visual
function required. The eyewear to be used must only be those specified by the laser
manufacturer;
•
Avoid wearing jewelry or other objects, such as wrist watches, that may reflect or
scatter the beam while using TAS;
•
Observe all safety precautions in the operator’s manual;
•
Never look directly into the laser beam;
•
Insure controlled access to the areas with laser operation. Be sure to post appropriate
warning signs visible to all entering the area;
•
Limit access to the spectrometer to qualified personnel only;
•
Work with the lowest energy laser beams consistent with the application;
•
Always minimize scattered laser radiation;
1.1.4 femtoFBG Specific Information
The femtoFBG TAS is designed in such a way that the laser beam is always inside the
enclosure with the exception of the processing area where the sample is exposed to the
