Neopost IN-360 User manual

Self Installation Guide

IN-360

Mail'n Ship Station

CONTENTS

IN-360 Mail'n Ship Station

LAN Cable or Modem and Phone Cord Welcome Kit Integrated Scale

Feed Deck with Moistener Postage Meter Ink Cartridge and

Postage Meter Tapes

Power Cord

Optional

Catch Tray

Optional External Scale

STEP 1 INSTALL THE FEED DECK

Feed Deck

Place the Feed Deck to the left of the Mail'n Ship Station.

A B

Remove the two pieces of shipping tape

on each side and remove the foam block.

Lift up and lockdown the slots of the

Mail'n Ship Station base over the tabs of

the feed deck.

STEP 2 INSTALL THE POSTAGE METER

Open the Mail'n Ship Station

Cover

Open the top cover by lifting at the open

slot

Remove the PSD (Postage

Meter) from the packaging Insert the Postage Meter into

the Mail'n Ship Station

1. Open the Postage Meter Cover in the left

side

2. Slide the Postage Meter securely into

the slot, positioning the postage meter

so the contacts are facing the rear of the

base and the locator runner (ridge) is

towards the bottom.

3. Close the Postage Meter Cover

A B C

INSTALL THE INK CARTRIDGE AND THE SCALE

Remove the Ink Cartridge from

the packaging.

Remove the caps and film strips from

the bottom of the Ink Cartridge

Insert the Ink Cartridge into

the Mail'n Ship Station.

1. Slide the Ink Cartridge into the slot

located on the right, positioning the

cartridge with the contacts facing the

rear of the system.

2. With your thumb "click" the ink cartridge

towards the back of the system to the

locked position

3. Close the top cover

Place the scale on top of the

machine and slide forward to

lock.

STEP 3

A B C

Attach the

cable and

close the

panel door.

STEP 4 CONFIGURATION AND ACTIVATION

Set-up the connection to the server, contact the server and activate the Mail'n Ship Station.

In order to load funds, download rates and support your Mail'n Ship Station, you must set up a connection between the Mail'n Ship Station and the

server .This can be done in two different ways:

1. LAN (Standard)

The Mail'n Ship Station communicates with the server over a high-speed internet connection or LAN (Local Area Network).

»This standard method allows for fast, seamless postage rate updates and funds download; and software updates to be performed

remotely and automatically.

»Utilizing LAN connectivity eliminates connection errors when connecting to the server.

»If you choose this method, proceed to Step 4A (pg 6) – Connecting The LAN Cable.

2. Modem (Optional)

If you do not have a high speed internet connection available, the Mail'n Ship Station can communicate with the server using a dial-up

modem connected to an analog telephone line or fax line.

»This method can only be used for postage rate updates and funds download.

»If you choose this method, skip to Step 4B (pg 8) – Connecting The Modem.

Connect to Internet / LAN jack

or router.

1. Select a location for the Mail'n

Ship Station near an Internet /

LAN jack or router.

2. Plug one end of the LAN cable

into the Internet jack.

Connect the other end of the

LAN cable into the Internet

jack or router on the left side

of the Mail'n Ship Station.

Connect the power.

Using the Power Cord, plug the female

connector into the right bottom back

corner of the Mail'n Ship Station. Take

the male end and plug it into the

power outlet.

Note : Switch your Mail'n Ship Station

on.

CONNECTING THE LAN CABLE

STEP 4A

A B C

1. LAN

Installation process

STEP 4A (CONTINUED)CONNECTING THE LAN CABLE

Installation process

Welcome, please press

"Ok" to begin the

installation process

Suite

Installation process

Please plug in your USB modem

or cable and press next

Press the “OK” button..

If the system is already plugged in, and

it is in sleep mode, press the

Sleep/Wake button.

Press the “OK” button.

Select “Next” by pressing the

“OK” button.

D E

STEP 4B

Select a location for the Mail'n

Ship Station near an analog

telephone jack.

The following are usually analog phone

lines:

»Fax lines

»Lines used by modems or credit

card readers

»Most residential phone lines

Connect the modem.

1. Plug one end of the telephone

cable into the analog phone outlet.

2. Take the other end of the phone

cord and connect it to the USB

modem.

3. Plug the USB modem into the USB

port located on the left side of the

Mail'n Ship Station.

CONNECTING THE MODEM (OPTIONAL ACCESSORY)

Connect the power.

Using the Power Cord, plug the female

connector into the right bottom back

corner of the Mail'n Ship Station. Take

the male end and plug it into the

power outlet.

A B C

Installation process

OKBack

Installation process

Press next to select your

Connection Type

Installation process

1. Modem

Press the “OK” button.

If the system is already plugged in, and

it is in sleep mode, press the

Sleep/Wake button.

Select “Next” by pressing the

“OK” button. Press "OK".

CONNECTING THE MODEM (OPTIONAL ACCESSORY)

STEP 4B (CONTINUED)

D E F

Welcome, please press

"Ok" to begin the

installation process

Other manuals for IN-360

Table of contents

Neopost IN-360 User manual

Popular Postal Equipment manuals by other brands