NEC SL1000 User manual

Single-Line Telephone User Guide

A50-031675-001

Issue 1.0

January 2011

Please read this manual carefully before Operating this product and save this manual for future use.

-1-

Before usin

Your Tele

hone…

Thank you for purchasing NEC SL1000 system.

Due to the flexibility built into the system, your Dialing Codes and Feature Capacities may differ

from those in this guide. Check with your NEC Authorized Supplier / System Administrator and make a

note of any differences.

NEC Single Line Telephone(AT-45) is displayed here. This User Guide describes general analogue

Single Line Telephone (SLT) procedures. Refer to the User Guide included with to your specific SLT

for details on additional key functions.

Placin

Calls

To change Trunk Access Code, Ask your NEC Authorized Supplier for details.

Listen for Dial Tone before dialing a Telephone Number.

For the Trunk Access Code, Ask your supplier for the details.

Your call will ring or voice-announce. If you hear ringing, wait for an answer. If you hear a beep, begin

speaking. Dialing “1” changes voice/ring mode. (in case the destination is Multi-line Telephone)

Telephone Numbe

Extension Number

Place an Outside Call <Quick Access>

Place an Intercom Call <Dial Access>

Press REDIAL Key to automatically

redial the last number you dialed.

Flashes when you have Message

Waiting or there is an incoming call.

INDICATOR

REDIAL Key

While on a call, press FLASH Key to

hold the line.

FLASH (RECALL) Key

9 ????

? ? ?

Trunk Access Code

HookFlash

-2-

Placin

Calls Quickl

The digit of Bin No. depends on the system setting. (0-9(Only Group ABB) / 00-99 / 000-999)

Telephone Numbers shall be pre-registered to the system.

System setting is necessary for Group ABB function. Ask your NEC Authorized Supplier for more

details.

Abbreviated (Speed) Dialing <for Outside>

Last Number Dialing <for Outside / Intercom>

Common ABB Bin No.

Common

ABB

Group ABB Bin No.

Group

ABB

# 2

# 4

???

# 5

-3-

our call doesn’t

o throu

h…

<Camp On> In case of Intercom Call, when you hear ringing, wait for the called party to answer.

In case of Outside Call, when you hear Dial Tone, begin telephone number dialing.

<Callback> In case of Intercom Call, when your phone starts the ringing, lift handset and wait for

the called party to answer.

In case of Outside Call, when your phone starts the ringing, lift handset, hear Dial

Tone, and begin telephone number dialing.

This function is applicable in case all trunks are busy condition. (not applicable for dialed

outside part

bus

When you set a MW, the called party’s Indicator starts to flash, and your Indicator is lit in Red.

When you answer a MW, the Indicator shall automatically be off when the called party answers.

Wait without

hanging up

Wait for the

system to call

you back

(Hear Busy Tone

or No Answer)

(In case of Camp On)

Set Camp On / Callback

Cancel Camp On / Callback

Set / Answer a Message Waiting

(Hear Busy Tone

or No Answer)

Your phone’s

Indicator is

flashing in Red

Set

Answer

8 5 0

870

0

-4-

Answerin

Calls

System setting is necessary to make Call Pickup Group. Ask your NEC Authorized Supplier.

Clear all messages (you have left for other extensions and messages other extension have left for you).

(Ringing)

Ringing

Extension

Extension Numbe

In same

Grou

In Other

Grou

Pickup for

Specified

Extension

our call doesn’t

o throu

h…

Cancel Message Waiting (Cancel Individually - at originated extension)

Clear all Message Waiting (at any extension)

Answering an Outside Call/ Intercom Call

Picking up a call for other Extensions

Extension Numbe

you want to cancel MW

8 7 1 ? ? ?

8 7 3

#

869

  ???

-5-

Hold / Transferrin

Calls

If you go on hook, the held call will ring back.

This operation puts your outside call on Exclusive Hold. Other extension user can not take the call off

Hold.

Holding a Call / Retrieving a Held Call

Retrieve a held outside call

Transferring a Call to the another Extension

(

Talkin

Hold Retrieve

FLASH o

HookFlash

(

Don’t han

)

FLASH or

HookFlash

(Talking)

Extension Number

(Announce)

FLASH or

HookFlash

Trunk No. you want to retrieve

7 7 2? ?

???

For the dial digit of Trunk Number, ask your NEC Authorized Supplier for details..

-6-

For More Convenient Use…

When

ou set DND function, the Internal Dial Tone pattern is chan

ed.

When you set Call Forward function, the Internal Dial Tone pattern is changed.

Do Not Disturb (DND)

Call Forwarding / Follow Me

(On-Hook)

DND : Trunk Incoming Call

DND : Intercom Incoming Call

DND : Trunk & Intercom Incoming Call

DND : Transferred (CFW) Call

DND : Cancel

8 4 71

To Call Forward Immediate

Set Destination Extension Number

???1

84 8

Cancel

To Call Forward When Your Phone is Busy

???

# 1 Set

Cancel

Destination Extension Number

When you set Call Forward function, the Internal Dial Tone pattern is changed.

To Call Forward When You Do Not Answer

Set Destination Extension Number

???1

84 5

Cancel

-7-

You can repeat this operation to add more parties.

You may be able to have up to 16 parties. (include your extension) May need to adjust the level due

to the Environment phones are placed.

Conference

(

Talkin

Extension Numbe

Tele

hone Numbe

(

Talk

)

FLASH or

HookFlash

eat for additional

arties

FLASH or HookFlash

8 2 6

???

? ?

When you set Call Forward function, the Internal Dial Tone pattern is changed.

To Call Forward When Your Phone is Busy or You Do Not Answer

Set Destination Extension Number

???1

84 4

Cancel

For More Convenient Use…

When you set Call Forward function, the Internal Dial Tone pattern is changed.

To Call Forward Both Ring

Set Destination Extension Number

???1

84 2

Cancel

When you set Call Forward function, the Internal Dial Tone pattern is changed.

To Call Forward Follow Me

Set Destination Extension Number

???1

84 6

Cancel

-8-

Built-In Answerin

Machine

(

VRS Messa

)

The Message can be recorded Up to 4 type of message..



The Message can not exceed 2 minutes.

The Message can be recorded Up to 4 type of message.



The Message can not exceed 2 minutes.

☛

System setting is necessary to use Built-In Answering Machine. Ask your NEC Authorized Supplier for details.

To Record a VRS

nswering Message

To Listen to a VRS Answering Message

To Erase a VRS Answering Message

Message Number

(001

004)

Messa

e Record

(

Messa

e Recordin

Sto

Recordin

7 1 6 7???

Message Number

(001

004)

Messa

e Listen

(

Messa

e Listenin

7 1 6 5 ? ? ?

Message Number

(001

004)

Messa

e Erase

7 1 6 3 ? ? ?

(

Messa

e Listenin

-9-

Built-In Answerin

Machine

(

Voice Mail Messa

)

The Message can be recorded Up to 10 messages.

The Message can not exceed 2 minutes.

To Listen to a Voice Mail Message

To Erase a

oice Mail Message

Message Number

(091

100)

(

Messa

e Listenin

7 1 6 5

Messa

e Listen

???

Message Number

(091

100)

Message Record

7 1 6 3 ? ? ?

Other manuals for SL1000

Table of contents

Popular Telephone manuals by other brands

GE 2-9480 user guide

Geemarc

Geemarc PHOTOPHONE 155 user guide

D-Link

D-Link DWR-720/PW user manual

Interquartz

Interquartz Gemini IQ333 operating instructions

SSS Siedle

SSS Siedle HT 840-0 operating instructions

Motorola

Motorola TITANIUM manual

Panasonic

Panasonic ICX Quick reference guide

LG H870DS user guide

Samsung

Samsung GT-I9500 Service manual

AT&T

AT&T Trimline 205 user manual

Selta

Selta zenyth 600 user guide

Doro

Doro AFTI 20 user guide

UNIQCELL

UNIQCELL A1 user guide

Panasonic

Panasonic KX Series User Sheet

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone manual

BT Decor 425 user guide

Teledex

Teledex PEARL user guide

Ericsson

Ericsson Dialog 3213 user guide