NEC OPS i5 PC User manual

OPS i5 PC - Install Guide for X Series NEC displays

Revised 12-30-2011 Page 1

OPS i5 PC - Install Guide for X Series NEC displays

Required Tools

●Philips Head Screw Driver

●Ethernet Patch Cable

Step 1

1. Remove LCD display from box and lay screen face down on

the box.

2. Carefully remove protective plastic cover to expose the

right side of the back of the LCD display where OPS slot is

located.

Revised 12-30-2011 Page 2

Step 2

1. Using Phillips head screwdriver, remove the four screws

that secure the OPS Slot Cover in place. Be sure to save

the 4 screws, you will need them to put the vented cover

on.

Step 3

1. Using Phillips head screwdriver, remove the two screws

holding the handle in place.

2. When handle is removed, place the two screws back into

the holes in the display but be sure to stop tightening as

soon as you meet resistance - screws will NOT go all the

way back in flush.

3. Set handle aside

*For 40” and 46” LCD's, the handle will not be re-installed as it will

be in the way of accessing the OPS PC. For 55” displays, where

the handle is not blocking access to the OPS PC, removing the

handle is not required.

Revised 12-30-2011 Page 3

Step 4

1. Open box containing OPS PC and remove contents - there

should be the OPS PC, CD and Option board slot cover.

Step 5

1. Using Phillips head screwdriver and the 4 screws you

saved when removing the factory cover, install the Option

board slot cover.

2. Using Phillips head screwdriver, remove the two slot

retaining screws at the front of the slot. Save these 2

screws as you will use them to secure the OPS PC in place

once installed.

*Note also in image, the 2 handle screws that have been re-

inserted in the previous steps, but that do NOT go in all the way

Revised 12-30-2011 Page 4

Step 6

1. Insert OPS PC into Option slot with fan facing away.

2. Make sure the OPS PC is seated properly, do not force.

IMPORTANT - make sure the fan is visible and facing away from

the display as you insert it.

Step 7

1. Using Phillips head screwdriver replace the 2 screws you

removed in step 5, #2 to secure OPS PC into place.

*Note the NEC logo position in image to the right.

Revised 12-30-2011 Page 5

Step 8

1. Insert standard straight through Ethernet cable into OPS

PC network port and connect to client network.

2. Now that the OPS PC is installed and the network

connection is in place, connect the power cord to the

display.

3. Stand the display upright and turn on the power (power

switch is located beside the power cord)

4. Using either the remote or the buttons on the display, select

the OPTION input. (Will show Option D on the display)

5. Verify the display powers on and that Windows starts up.

6. Rise Display content should automatically start playing in a

few minutes.

7. Now that the LCD and OPS PC have been verified to work

properly, disconnect the Ethernet cable, power down the

display, and proceed with the installation of the LCD.

Revised 12-30-2011 Page 6

Table of contents

Other NEC Desktop manuals

NEC

NEC POWERMATE PROFESSIONAL 9000 - SERVICE User manual

NEC

NEC POWERMATE VE - SERVICE 05-1996 User manual

NEC

NEC PowerMate CT User manual

NEC

NEC Express5800/54Xb User guide

NEC

NEC POWERMATE 2000 - 01-2000 User manual

NEC

NEC POWERMATE ES Series User manual

NEC

NEC POWERMATE ES 5200 - SERVICE User manual

NEC

NEC POWERMATE 2000 User manual

NEC

NEC NP-PH1000U User manual

NEC

NEC POWERMATE PROFESSIONAL 9000E - SERVICE User manual

NEC

NEC PowerMate ES SlimLine Series User manual

NEC

NEC LCD4020-BK-AV - 40IN LCD 1200:1 1366X768 60HZ Dvi-d... User manual

NEC

NEC Direction SP E-Series User manual

NEC

NEC POWERMATE PROFESSIONAL 9000 - SERVICE User manual

NEC

NEC PowerMate 2000 Series Instruction Manual

NEC

NEC POWERMATE 2000 - 05-2001 User manual

NEC

NEC POWERMATE P2166 User manual

NEC

NEC POWERMATE V AND P - SERVICE User manual

NEC

NEC POWERMATE CT 815 - RELEASE NOTES User manual

NEC

NEC POWERMATE V486 - SERVICE User manual

NEC

NEC PowerMate CT Instruction Manual

NEC

NEC DIRECTION L - SERVICE User manual

NEC

NEC POWERMATE - VERSION 2007 User manual

NEC

NEC PowerMate Educational User manual

Popular Desktop manuals by other brands

HP

HP m9060n - Pavilion - Elite Quick setup

Asus

Asus E210 Series user guide

Dell

Dell Inspiron 600m quick start

Dell

Dell Inspiron 3662 Service manual

TotalFlow

TotalFlow uFLO user manual

HP

HP Presario SV7000 - Desktop PC manual

HP

HP ProDesk 400 G5 Maintenance and service guide

Logitech

Logitech MK320 quick start guide

Dell

Dell XPS 730 H2C Service manual

Sony

Sony Vaio Series operating instructions

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer quick start

Alto

Alto MD 250 instruction manual

Lenovo

Lenovo ThinkCentre Edge 72 Manual

Lenovo

Lenovo ThinkStation D20 Manual

Arbor Technology

Arbor Technology FPC-7800 Series user manual

Sony

Sony VAIO VGX-TP1 Series user guide

Asus

Asus Eee Box B204 user manual

Dell

Dell Optiplex 9010 All In One owner's manual