Nauticam 86221 User manual

Current as of 2019-12-27

Instruction Manual for

M67 Flip Holder/Double Flip Holder for

MWL-1

PN# 86221, #86222

OREWORD

Thank you for your purchase of a NAUTICAM product.

At NAUTICAM, e pride ourselves in the ability to recognize the

requirements of professional as ell as amateur under ater

photographers and fulfill them through the innovative designs of our

products. We strive to achieve a high level of user-friendliness by

allo ing stress-free installation and easy operation of all important

functions of the camera.

Please read this manual carefully before using the product, this ill

maximize its performance as ell as its lifetime.

RR NTY

All NAUTICAM Products are arranted against any material and

manufacturing defects for t o years from the date of purchase for

consumer use.

This arranty only applies to products purchased from

authorized NAUTICAM dealers and does not extend beyond the original

retail purchaser.

To return your product for service, please contact your regional

authorized service center(s). Please note that this arranty only applies

hen the product is purchased in the territory here the service center

is located.

NAUTICAM does not hold responsibility for damage, of any nature, to

any equipment used ith and/or placed ithin our products.

NAUTICAM accepts no liability for any loss of captured images or the

inability to capture images even if it is due to the malfunctioning of our

products.

Unauthorized modifications and/or repairs of our products ill

automatically invalidate the arranty.

Press the lever and flip the holder to the side then remove the

locking ring from the flip holder.

Align the t o positioning scre s on the back of the holder ith

the slots on the front of the port.

The position of the flip holder can be changed by relocating the

t o scre s in the threaded holes around holder.

Fasten the holder by scre ing the locking ring into the thread

on the front of the port.

---Continue on next page---

INST LL

THE

PORT

Press

Current as of 2019-12-27

---Continue from front page---

H NGING THE

OUNTING

ING

A M67 mounting ring is supplied for directly mounting MWL-1

on the flip holder.

Follo belo instruction to exchange the Bayonet Mounting

Ring of MWL-1 to M67 Mounting Ring in order to be securely

Remove the 7x scre s from the back of the lens.

Remove the bayonet mounting ring of MWL-1. Note that there

are 4x small black cylindrical positioning pins. All 4 pins should

be remain in the back of the lens

Locate the 4 small sockets of the M67 mounting ring. Align ith

the positioning pins on the MWL-1 and place it on top.

Secure the mounting ring by tightening the 7x scre s

Fastening the MWL-1 tightly on M67 flip holder or double flip

holder. Please refer to MWL-1 to adjusting the lens hood

position

Remark: Nauticam supports only e-manuals. Please do nload corresponding

product manuals on Nauticam.com ebsite, or contact us for e-manuals.

This manual suits for next models

Other Nauticam Camera Accessories manuals

Nauticam

Nauticam 16346 User manual

Nauticam

Nauticam NA-GH5 User manual

Nauticam

Nauticam NA-XZ1 User manual

Nauticam

Nauticam NA-D700 User manual

Nauticam

Nauticam NA-Ultra5 Housing User manual

Nauticam

Nauticam NA-LX100 User manual

Nauticam

Nauticam 25107 User manual

Nauticam

Nauticam NA-S1H User manual

Nauticam

Nauticam NA-EM1II User manual

Nauticam

Nauticam NA-A7II User manual

Nauticam

Nauticam NA-Z50 User manual

Nauticam

Nauticam 83222 User manual

Nauticam

Nauticam 16339 User manual

Nauticam

Nauticam 87512 User manual

Nauticam

Nauticam NA-A2020 User manual

Nauticam

Nauticam NA-D800 User manual

Nauticam

Nauticam NA - Z7II User manual

Nauticam

Nauticam NA-503-H User manual

Nauticam

Nauticam 36167 User manual

Nauticam

Nauticam NA-A7RV User manual

Nauticam

Nauticam TTL Flash Trigger User manual

Nauticam

Nauticam 19569 User manual

Nauticam

Nauticam NA - A7IV User manual

Nauticam

Nauticam NA-RX100IV User manual

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions