MSI MS-98M9 User manual

MS-98M9

(v1.x) Industrial Computer Board

Preface MS-98M9

a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names

mentioned may be trademarks of their respective owners. No warranty as to

accuracy or completeness is expressed or implied. MSI reserves the right to

make changes to this document without prior notice.

Revision History

Revision Date

V1.0 2020/01

Technical Support

If a problem arises with your product and no solution can be obtained from

the user’s manual, please contact your place of purchase or local distributor.

Alternatively, please visit https://www.msi.com/support/ for further guidance.

iii

Preface MS-98M9

Safety Instructions

￭Always read the safety instructions carefully.

￭Keep this User’s Manual for future reference.

￭Keep this equipment away from humidity.

￭Lay this equipment on a reliable at surface before setting it up.

￭The openings on the enclosure are for air convection hence protects the

equipment from overheating. DO NOT COVER THE OPENINGS.

￭Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

￭Place the power cord such a way that people can not step on it. Do not place

anything over the power cord.

￭Always Unplug the Power Cord before inserting any add-on card or module.

￭All cautions and warnings on the equipment should be noted.

￭Never pour any liquid into the opening that could damage or cause electrical

shock.

￭If any of the following situations arises, get the equipment checked by

service personnel:

▶The power cord or plug is damaged.

▶Liquid has penetrated into the equipment.

▶The equipment has been exposed to moisture.

▶The equipment does not work well or you can not get it work according

to User’s Manual.

▶The equipment has dropped and damaged.

▶The equipment has obvious sign of breakage.

￭DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

UNCONDITIONED, STORAGE TEMPERATURE ABOVE 60oC, IT MAY

DAMAGE THE EQUIPMENT.

Preface MS-98M9

Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH

Regulation (Regulation EC No. 1907/2006 of the European Parliament and the

Council), MSI provides the information of chemical substances in products at:

https://www.msi.com/html/popup/csr/evmtprtt_pcm.html

Battery Information

European Union:

Batteries, battery packs, and accumulators should not be

disposed of as unsorted household waste. Please use the

public collection system to return, recycle, or treat them in

compliance with the local regulations.

廢電池請回收

Taiwan:

For better environmental protection, waste batteries should

be collected separately for recycling or special disposal.

California, USA:

The button cell battery may contain perchlorate material

and requires special handling when recycled or disposed

of in California.

For further information please visit:

https://www.dtsc.ca.gov/hazardouswaste/perchlorate/

Danger of explosion if battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by the manufacturer.

Preface MS-98M9

CE Conformity

Hereby, Micro-Star International CO., LTD declares that this device

is in compliance with the essential safety requirements and other

relevant provisions set out in the European Directive.

FCC-B Radio Frequency

Interference Statement

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference

to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning

the equipment o󰘯 and on, the user is encouraged to try to correct the interference

by one or more of the measures listed below:

￭Reorient or relocate the receiving antenna.

￭Increase the separation between the equipment and receiver.

￭Connect the equipment into an outlet on a circuit di󰘯erent from that to

which the receiver is connected.

￭Consult the dealer or an experienced radio/television technician for

help.

Notice 1

The changes or modi󰘰cations not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and AC power cord, if any, must be used in order to

comply with the emission limits.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received, including interference that

may cause undesired operation.

WEEE Statement

Under the European Union (“EU”) Directive on Waste Electrical and

Electronic Equipment, Directive 2012/19/EU, products of “electrical

and electronic equipment” cannot be discarded as municipal waste

anymore and manufacturers of covered electronic equipment will be

obligated to take back such products at the end of their useful life.

Preface MS-98M9

CONTENTS

Revision History ............................................................................................ ii

Technical Support.......................................................................................... ii

Safety Instructions.........................................................................................iii

Chemical Substances Information ............................................................... iv

Battery Information....................................................................................... iv

CE Conformity............................................................................................... v

FCC-B Radio Frequency Interference Statement ......................................... v

WEEE Statement .......................................................................................... v

1 Overview.......................................................................................1-1

Specications.............................................................................................1-2

Layout ........................................................................................................1-5

2 Hardware Setup ...........................................................................2-1

CPU Installation .........................................................................................2-3

Memory ......................................................................................................2-6

Power Supply.............................................................................................2-8

Rear Panel I/O ...........................................................................................2-9

Connector................................................................................................. 2-11

Jumper .....................................................................................................2-17

Slot...........................................................................................................2-18

3 BIOS Setup...................................................................................3-1

Entering Setup ...........................................................................................3-2

The Menu Bar ............................................................................................3-4

Main ...........................................................................................................3-5

Advanced ...................................................................................................3-6

Boot..........................................................................................................3-14

Security ....................................................................................................3-15

Power .......................................................................................................3-21

Save & Exit...............................................................................................3-23

ME Conguration .....................................................................................3-24

Appendix GPIO WDT Programming............................................... A-1

Abstract..................................................................................................... A-2

General Purposed IO ................................................................................ A-3

Watchdog Timer ........................................................................................ A-5

SMBus Access .......................................................................................... A-6

Appendix How to rename the network adapter ............................ B-1

1-1-1

Thank you for choosing the MS-98M9, an excellent industrial computer

board.

Based on the innovative Intel®Skylake-SP & Cascade Lake-SP

Processor, the MS-98M9 is engineered to provide reliable performance

for a wide variety of industrial applications.

1Overview

1-2

Overview MS-98M9

Specications

Processor

■1st / 2nd Gen Intel® Skylake-SP & Cascade Lake-SP Xeon® Processor, Max

205W

PCH

■SKU1: Intel® C622 Express

■SKU2: Intel® C621 Express

Memory

■6 * 288-pin DDR4 RDIMMs

■DDR4 ECC RDIMMs memory up to 2666MHz

■Max 192GB

Network

■Full SKU

-LAN1 / LAN2: Intel® I210-AT GbE LAN

-LAN3 / LAN4: Intel® X557-AT2 10GbE LAN (10GBASE-T transmissions

requests thecable grade of Cat 6/Cat 6a or above)

■Basic SKU

-LAN1 / LAN2: Intel® I210-AT GbE LAN

Storage

■8* SATA 6Gb/s ports

-RAID 0, 1, 5, 10 supported

-AHCI Mode supported

■1 * mSATA Slot (Full-size/Half-size, Shared with Mini-PCIe)

Audio

■Realtek® ALC887 High Denition Audio codec (Co-lay ALC888S)

1-3

Overview MS-98M9

Expansion Slots

■2 * PCIe x 16 slots

-PCIE2, PCIE4 (Graphics Card Supported)

■3 * PCIe x 8 slots

-PCIE1

-PCIE3, PCIE5 (Graphics Card Supported)

■2 * PCIe x 4 slots

-PCIE6, PCIE7

■1 * Mini-PCIe Slot (Full-size/Half-size, Shared with mSATA)

Important

• PCIE1~5 with the latest Intel RSTe it provides a compelling RAID solution

for NVMe SSDs via Intel VROC HW key.

Rear Panel I/O

■2 * COM ports

■2 * 10GbE RJ45 ports (Full SKU)

■2 * GbE RJ45 ports

■6 * USB 3.2 Gen 1 ports (5V/0.9A)

■1 * Mouse/Keyboard combo port

Internal I/O

■1 * System power connector

■1 * CPU power connector

■8 * SATA 6Gb/s ports

■1 * Vertical USB 2.0 port

■3 * USB 2.0 box headers (6 ports)

■1 * VROC box header

■1 * TPM pin header

■4 * RS232 serial port box headers (COM3~COM6)

■6 * Serial port power jumpers

■1 * SMBus box header

■1 * PMBus box header

■1 * ME jumper

■2 * PCIe congure jumper

■1 * S/PDIF box header

■1 x 2*6-pin 2.54-pitch Pin-header for Audio (Line-in/Line-Out/Mic-in)

■1 * Front panel box header

■1 * Front audio box header

■1 * CPU fan header

■6 * System fan headers

■1 * Chassis intrusion header

■1 * AT/ATX jumper

■1 * Clear CMOS jumper

■1 * LAN LED header

■2 * GPIO box headers (8 x GPI, 8 x GPO; 5V)

1-4

Overview MS-98M9

Form Factor

■ATX Size: 305mm (L) x 244mm (W) x 1.6mm (H)

Environment

■Operating Temperature: 0 ~ 60oC

■Storage Temperature: -20 ~ 80oC

■Humidity: 10 ~ 90% RH, non-condensing

Important

• The product doesn’t support ErP standard (S5 Power consumption under

1W).

• Please use a power supply which minimum output should be at least 850

Accessories

■2 * SATA3.0 cables

■1 * Dual USB 2.0 cable with bracket

■1 * Driver & user manual CD

■1 * I/O shield

Certication

■CE, FCC Class B, BSMI, RCM, VCCI

OS Support

■Skylake-SP

-Windows Server 2012 R2 (64-bit)

-Windows Server 2016 (64-bit)

-Linux Kernel 4.14, Ubuntu 18.04 LTS, Fedora 29

-Windows 10 IoT Enterprise LTSC/SAC 1809 (64-bit, RS5, Pre-test only)

■Cascade Lake-SP

-Windows Server 2016 (64-bit)

-Windows Server 2019 (64-bit)

-Linux Kernel 4.14, Ubuntu 18.04 LTS, Fedora 29

-Windows 10 IoT Enterprise LTSC/SAC 1809 (64-bit, RS5, Pre-test only)

Table of contents

Popular Desktop manuals by other brands

HP m9060n - Pavilion - Elite Quick setup

Asus

Asus E210 Series user guide

Dell

Dell Inspiron 600m quick start

Dell

Dell Inspiron 3662 Service manual

TotalFlow

TotalFlow uFLO user manual

HP Presario SV7000 - Desktop PC manual

HP ProDesk 400 G5 Maintenance and service guide

Logitech

Logitech MK320 quick start guide

Dell

Dell XPS 730 H2C Service manual

Sony

Sony Vaio Series operating instructions

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer quick start

Alto

Alto MD 250 instruction manual

Lenovo

Lenovo ThinkCentre Edge 72 Manual

Lenovo

Lenovo ThinkStation D20 Manual

Arbor Technology

Arbor Technology FPC-7800 Series user manual

Sony

Sony VAIO VGX-TP1 Series user guide

Asus

Asus Eee Box B204 user manual

Dell

Dell Optiplex 9010 All In One owner's manual