Mounting Dream MD2209-03 User manual
MD2209-03 INSTALLATION INSTRUCTION
(DE-C1)
10"~26" Max:100x100mm/4x4"
Min:50x50mm/2x2"
x3 x1
TV
1 2
Für die Installationsanweisungen auf Deutsch, siehe Seite 10~11.
Pour l'instruction en Français, veuillez vous reporter à la page 12~13.
Para las instrucciones de la instalación en Español, favor vea la página 14~15.
Per le Istruzioni in Italiano, vedi pagina 16~17.
If you have any questions, please contact our customer service.
Before getting started, let’s make sure this mount is perfect for you!
1 Is your TV VESA
equal to/greater than
50x50mm/2x2" and
equal to/less than
100x100mm/4x4"?
2 Does your TV
(including accessories)
weigh less than
22 LBS (10 kg)?
4 Installation Tools
(Not Included)
Yes --- Perfect!
No --- This mount is NOT compatible.
MAX:100mm/4"
MAX:
100mm/4"
Yes --- Perfect!
No --- This mount is NOT compatible.
Band Tape
2m
2M2M
5 Safety Caution
● The hardware provided in the package can only use in 0.5"(12.7mm) thick or above
wooden board installation on RV.
● The wall must be capable of supporting five times the weight of the TV and mount
combined. According to the wall you're going to install, the structure of your RV may
require additional reinforcement.
● Do not apply this product to any purpose not indicated by Mounting Dream.
● Make sure to stow the TV and fully lock the mount in place before your RV is moving.
● Incorrect installation may result in product damage or body injury. Mounting Dream shall
bear no responsibility for any damage or injury resulted from incorrect installation,
incorrect assembly or misuse.
Pencil Screwdriver Electrodrill Socket Wrench
1/2"(13mm)
3 Where can you
install this mount?
0.5"(12.7mm) thick or above wooden board
Min. 0.5"(12.7mm)
1/8"(3mm)
Wood Drill Bit
1
Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of the
installation, assembly or use of this product, please contact customer service.
Parts and Hardware
M4x12mm
M6x12mm
M4 M6
Washers
TV Screws
x4
x4
x4 x4
1-1 Disassemble Wall Plate Unit into Two Pieces
Wall Plate Unit
x1
Allen Key
x1
2
Wall Plate
TV Plate
one turn
x4
M5x12mm
M4x30mm
x4
M5x30mm
x4
M6x35mm
x4
M6x17mm 2.5mm
x4
x4
Spacers
WARNING:This product contains small items that could be a choking hazard if
swallowed. Before starting assembly, verify all parts are included and undamaged. For parts
shortage or damage, please contact customer service.
NOTE: Not all hardware included will be used.
3
1-2 Choose Configuration
① 50mm x 50mm
② 75mm x 75mm
③ 100mm x 100mm
M6
M5
M4
1-3 Select TV Screws
TV back
Bracket Washer
Bracket
Long Screw
Spacer
No, go to PAGE 4 for detailed combination.
Yes, go to PAGE 4 for detailed combination.
TV back
1-4 Need Spacer?
Short Screw
Washer
①
②
③
①
①①
②
② ②
③
③③
4
1-5 Attach TV Plate to TV Back
No!
Screw and washer
Spacer(s), screw and washer
Tips: If you need to combine M6(f) screw with 2.5mm spacer(h), you have to remove the
inner circle.
Parts and Hardware
Min. 0.5"(12.7mm)
1/8"
(3mm)
Wall Plate
x4
CAUTION: To avoid potential personal injury or property damage:
All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate
assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to
the next step.
To prevent the TV falling down, the Bolt Head Must Keep UP at this step!!
The TV plate is off center about 0.63"/16mm to
the wall plate. Please consider this point, when
positioning your TV on the wall.
Wooden Board
Lag Bolt M6x25mm
5
0.63"(16mm)
TV plate center Wall plate center
Wall Plate
Bolt Head UP!
Level
Wall Plate
Level
22 LBS (10 kg)
Before hanging TV, please conduct "wall plate installation integrity test" first.
TV
1 2
6
4-1 Tilting angle adjustment (+5°/-15°)：
Pull TV to your desired angle then fasten 2 tilting bolts with
Allen key .
4-2 TV leveling adjustment (±3°):
Loosen 2 leveling bolts on the rear of TV plate by maximum 1
turns, adjust to level, and retighten to secure.
7
Tilting bolts
Tilting bolts
-15°
+5°
Loosen
Tighten
Loosen
Tighten
Important ! Make sure to stow the TV and fully lock the mount in place
before your RV moves.
Push your TV to the wall. Pull down the strap and lock the TV plate to
the wall plate.
8
Pull down
the straps
Stow
Pull and hold the strap
Pull out
9
Allen key storage: For easy adjustment, you might put the Allen key on
the wall plate as illustration.
50mm
75mm
100mm
120mm
229mm
166mm
98mm
50mm
75mm
100mm
130mm
346mm
68mm
+90°/-90°
+5°
-15°
Table of contents
Other Mounting Dream TV Mount manuals
Mounting Dream
Mounting Dream MD2463-L User manual
Mounting Dream
Mounting Dream MD2296-24K User manual
Mounting Dream
Mounting Dream MD2377-KT User manual
Mounting Dream
Mounting Dream MD2393-MX User manual
Mounting Dream
Mounting Dream MD2263-LK User manual
Mounting Dream
Mounting Dream MD2501 User manual
Mounting Dream
Mounting Dream MD5425 User manual
Mounting Dream
Mounting Dream MD2296-24 User manual
Mounting Dream
Mounting Dream MD2378 User manual
Mounting Dream
Mounting Dream MD5231 User manual
Mounting Dream
Mounting Dream MD2163-K User manual
Mounting Dream
Mounting Dream MD2210 User manual
Mounting Dream
Mounting Dream MD5232 User manual
Mounting Dream
Mounting Dream HM2296-24K User manual
Mounting Dream
Mounting Dream MD2263-XLK User manual
Mounting Dream
Mounting Dream MD2268-32 User manual
Mounting Dream
Mounting Dream MD2413-S-02 User manual
Mounting Dream
Mounting Dream HM2377 User manual
Mounting Dream
Mounting Dream MD2868-M-03 User manual
Mounting Dream
Mounting Dream MD2268 User manual
