Motorola PMLN5792 User manual

MISSION

CRITICAL

WIRELESS

ADAPTER

PMLN5792

Blank.fm Page 1 Wednesday, October 13, 2010 9:34 PM

English

FOREWORD

Product Safety and RF Exposure

Compliance

ATTENTION!

The radio is restricted to occupational use only to

satisfy ICNIRP/ FCC RF energy exposure

requirements. Before using this product, read the

RF energy awareness information and operating

instructions in the Product Safety and RF Exposure

booklet enclosed with your radio (Motorola

Publication part number 6881095C98 - This is US

Safety. EMEA version is 6864117B25.) to ensure

compliance with RF energy exposure limits.

This device complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any

interference received, including interference that

may cause undesired operation. Any changes or

modifications not expressly approved by

Motorola may void the user's authority to

operate this device.

Before using this product, read the

operating instructions for safe

usage contained in the Product

Safety and RF Exposure booklet

enclosed with your radio.

a u t i o

Bluetooth®is a registered trademark of the Bluetooth

Special Interest Group.

English

OPERATION

Attaching the Mission Critical Wireless

Adapter to the Radio's Universal Connector

Below are the steps to attach the Mission Critical

Wireless Adapter PMLN5792 to the radio’s

universal connector:

1. Ensure that the radio is turned off before

attaching the adapter to the radio.

2. Remove the universal connector cover from

the side of the radio.

3. Insert the bottom hooked end of the adapter

into the radio's bottom slot. Pivot the top of the

adapter towards the radio, then engage the

adapter's spring loaded latch in the radio's top

slot. Refer to Figure 1 Mission Critical Wireless

Adapter.

4. Secure the adapter to the radio using the

tethered screw.

English

Figure 1 Mission Critical Wireless Adapter

Top Slot

Bottom

Slot

Bottom

Hooked

End

Tethered

Screw

Spring

Latch

LED

Blue

Dot

Audio Routing

Toggle Switch

English

Supported Bluetooth Devices

• NTN2570A, HKXXXX Wireless Accessory

Kit, NFP, 12" CABLE

• NTN2573A, HKXXXX Wireless Accessory

Kit, NFP, 9.5" CABLE

• NTN2571A, HKXXXX Wireless Accessory

Kit, NFP

LED Status Indication

State LED Indication

Successful Power Up Blue LED Blinks 3

times

Not Paired with any

Bluetooth Device

Blue LED Blinking

Not Connected with

Bluetooth Headset

Blue LED

Illuminated

Bluetooth Headset

Connected

Blue LED Heartbeat

Blinking (On for

every 4 seconds)

Table 1: LED Status Indication

English

Mission Critical Wireless Adapter Pairing

Procedure

1. Place the Bluetooth device in pairing mode.

Refer to respective Bluetooth device’s user

manual.

2. Refer to “Attaching the Mission Critical

Wireless Adapter to the Radio's Universal

Connector” on page 1 to attach the adapter to

the radio.

3. Place the blue dot (secure pairing spot) on the

Bluetooth device within one inch of the blue

dot (secure pairing spot) on the adapter.

a.The adapter allows a maximum of 1 audio

and 1 non-audio device to pair with it.

b.If the maximum number of device is

reached, the user needs to unpair the

device. Refer to step 7 for unpairing

procedure.

4. The adapter provides LED indication when

successfully connected with the Bluetooth

Headset Device .Refer to “LED Status

Indication” on page 3.

5. Perform link check to verify the Bluetooth

connection between the adapter and the

Bluetooth device. Refer to respective Bluetooth

device’s user manual.

6. Bluetooth devices which are connected

successfully with the adapter are reconnected

automatically on the next power up.

English

7. To replace with new Bluetooth device:

a.Power OFF the Radio

b.Press and hold the PTT button on the

adapter while powering up the radio until the

adapter provides LED indication. This

indicates that the dongle has unpaired with

the previously paired device and is ready to

pair with the new device. Refer to “LED

Status Indication” on page 3.

c.Repeat steps 1 to 5 to pair a new Bluetooth

device.

Note: When step 7 is performed, it will erase all the

previously paired device information. However, the user can

repeat the “Mission Critical Wireless Adapter Pairing

Procedure” on page 4 for pairing with intended device.

Bluetooth Link Lost

In the event of interference, or if the Bluetooth

Device is out of range, the link between the

Mission Critical Wireless Adapter and Bluetooth

Device may be lost.

If the link between the adapter and Headset

(Bluetooth Device) is lost, the received audio is

automatically routed back to the radio's speaker

and the adapter will not allow the Bluetooth device

to key-up the radio.

Bluetooth Link Restored

Once the Bluetooth Device is in range or after

interference has subsided, the link between the

Mission Critical Wireless Adapter and the

Bluetooth Device is restored.

English

When the link between the adapter and the

Headset (Bluetooth Device) is restored, the

adapter will allow the Bluetooth device to key-up

the radio.

Audio Routing Toggle Switch

The toggle switch on top of the adapter allows the

user to switch audio between the Mission Critical

Wireless Adapter and the radio.

• With the toggle switch positioned away from

the radio, audio will be routed to the radio

speaker, and the radio microphone is active

during transmit.

• With the toggle switch positioned towards

the radio, audio will be routed to the

Bluetooth headset earpiece, and the

headset microphone will be active. The

adapter and headset must be paired first. To

pair the adapter and headset, refer to

“Mission Critical Wireless Adapter Pairing

Procedure” on page 4.

Other Notes

• The Mission Critical Wireless Adapter

PMLN5792 is non-serviceable.

• The Mission Critical Wireless Adapter

PMLN5792 is for portable usage only.

• The Mission Critical Wireless Adapter

PMLN5792 only supports one Headset and

one Bluetooth PTT POD.

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized

M Logo are trademarks or registered trademarks of Motorola

Trademark Holdings, LLC and are used under license.

All other trademarks are the property of their respective owners.

*6801200302

68012003026-A

Table of contents

Other Motorola Adapter manuals

Motorola

Motorola BT06 User manual

Motorola

Motorola NNTN8040 User manual

Motorola

Motorola PMLN6396 User manual

Motorola

Motorola PMLN6396 User manual

Motorola

Motorola Vonage VT2542 User manual

Motorola

Motorola DC600 Instruction Manual

Motorola

Motorola M68CPA08QF80 User manual

Motorola

Motorola USBw 100 Series User manual

Motorola

Motorola GP Professional Series User manual

Motorola

Motorola MA1 User manual

Motorola

Motorola WN825G User manual

Motorola

Motorola D650 User manual

Motorola

Motorola SURFboard SBM1100 User manual

Motorola

Motorola Motostart D200 User manual

Motorola

Motorola WN825G Operating instructions

Motorola

Motorola PC800 User manual

Motorola

Motorola UTA220/UTA220k User manual

Motorola

Motorola HLN9742 User manual

Motorola

Motorola QG-PC850 User manual

Motorola

Motorola USBw 100 Series User manual

Motorola

Motorola LPCI810 User manual

Motorola

Motorola DC800 User manual

Motorola

Motorola WN825Gv2 User manual

Motorola

Motorola DTA100 User manual

Popular Adapter manuals by other brands

PCB Piezotronics

PCB Piezotronics 090B274 Installation and operating manual

Auvidea

Auvidea J20 Technical reference manual

Gossen MetraWatt

Gossen MetraWatt AT3-III E operating instructions

Akribis

Akribis ITF-21-BISS-MIT user manual

Tenda

Tenda W54U user guide

ROHO

ROHO AGILITY Operation manual

PROLiNK

PROLiNK WN2001 Quick installation guide

Hawking

Hawking HUF2 Specifications

Airlink101

Airlink101 AWLC4030 user manual

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter user manual

Philips

Philips SWA4554S/10 user manual

JVC

JVC TS-C9D2B Assembly and installation instructions

NETGEAR

NETGEAR A6100 quick start

D-Link

D-Link DWA-121 Quick install guide

Philips

Philips SWA2037 Specifications

Basalte

Basalte 0610-20 installation manual

Yealink

Yealink EHS40 user guide

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A installation guide