Migatronic ZETA 60 User manual

50113777

QUICKGUIDE

ZETA 60 I100

10A 30A 45A 60A

0 5 10 15 20

0.9

1.0

1.1

1.2

10A 30A 45A 60A 75A 85A 100A

0 5 101520253035

0.9

1.0

1.1

1.2

1.4

1.5

1.6

Expected quality cut

Dividing cut with reduced quality

Zeta 60

Zeta 100

Please regard the table as a guideline for choice of nozzle size/A compared with maximum

plate thickness for cutting in mild steel. In the case of cutting in other materials, the possible

cutting capacity and cutting speed are reduced.

Amperage

setting (A)

Amperage

setting (A)

Nozzle size mm

Plate thickness mm

1Control knob

Control knob for setting the cutting current:

20-60A for Zeta 60, and

20-100A for Zeta 100.

2Cutting voltage

The LED shines for safety reasons when

there is voltage on the cutting torch.

3Overheating

The LED shines if cutting is interrupted due

to overheating of the machine. The machine

will reconnect automatically after a short

cooling period.

4 Mains error

Low voltage.

5 Cutting current

The LED indicates cutting current.

6 Air pressure

The LED shines if the air pressure falls

to below 3 bar. The machine stops

automatically.

7 Torch error

The LED ﬂashes if there is a short circuit in

the torch. The machine stops automatically.

The LED shines if the torch body is assembled

incorrectly. Always turn off the machine

when changing the spare parts. There is a

risk of high voltage and electric chock.

8 Normal cutting

This function should be used in general.

9 ”Grid” cutting

This function should only be used under

special conditions (e.g. cutting in punched

plates or metal grids); Automatic change-

over between pilot arc and cutting arc.

10 Plasma gouging (Zeta 100 only)

This function is for gouging out

material/welds.

11 Air pressure test

Zeta 60: The gas valve will open without

igniting the arc. This function allows check

and adjustment of the air pressure on

the gauge positioned on the back of the

machine. The air pressure should be

min. 3.5bar for cutting.

Zeta 100: An electrical detection of

over/under pressure is present and

therefore the meter in the regulator has

been removed. The air pressure should be

min. 3.5 bar for cutting and 2.5 bar for

gouging.

12 A (Zeta 100 only)

Display of arc voltage or cutting current.

The key pad must be pressed for 3 seconds

and the LED next to the “A” indicator

will be turned off, when the arc voltage

is displayed. Repress = return to cutting

current.

QUICKGUIDE ZETA 60 I100

910 11

Other manuals for ZETA 60

This manual suits for next models

Other Migatronic Welding System manuals

Migatronic

Migatronic RWF2 User manual

Migatronic

Migatronic PILOT 1500 HP User manual

Migatronic

Migatronic MWF 11x User manual

Migatronic

Migatronic PI 350 AC/DC User manual

Migatronic

Migatronic MIG 385 MK III User manual

Migatronic

Migatronic Focus Tig 200 AC/DC User manual

Migatronic

Migatronic FOCUS TIG 200 PFC User manual

Migatronic

Migatronic FOCUS MIG 300 User manual

Migatronic

Migatronic PI 320 DC User manual

Migatronic

Migatronic SIGMA SELECT ROBO User manual

Migatronic

Migatronic AUTOMIG User manual

Migatronic

Migatronic ZETA 60 User manual

Migatronic

Migatronic Multimotive 220 User manual

Migatronic

Migatronic AUTOMIG User manual

Migatronic

Migatronic OMEGA2 BOOST User manual

Migatronic

Migatronic AUTOMIG User manual

Migatronic

Migatronic MIGALOG User manual

Migatronic

Migatronic LTE 200 User manual

Migatronic

Migatronic SIGMA Select 300 User manual

Migatronic

Migatronic Automation CoWelder Sigma Select 400C... Manual

Migatronic

Migatronic SIGMA ONE 230 User manual

Migatronic

Migatronic SIGMA 300 Compact User manual

Migatronic

Migatronic TIG Scout 160 HP User manual

Migatronic

Migatronic FOCUS MIG User manual

Popular Welding System manuals by other brands

Berner

Berner PLASMACUT 54 instruction manual

Pro Spot

Pro Spot PR-155 Assembly instructions

Forney

Forney 210 operating manual

Thermal Arc

Thermal Arc 400S operating manual

Lincoln Electric

Lincoln Electric HANDYMIG 170I Operator's manual

GYS

GYS PROTIG 201 AC/DC Original instructions

TAFA

TAFA 30*8B35 owner's manual

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Technical specifications

ESAB

ESAB Buddy Arc 145 instruction manual

CIGWELD

CIGWELD 636804 use instructions

Red-D-Arc

Red-D-Arc DC-400 Operator's manual

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 owner's manual

Elettro

Elettro HI-MIG 3000 SYNERGIC instruction manual

WIA

WIA Weldmatic 270 CP132-2 Operator's manual

Sonics

Sonics H520T instruction manual

Miller

Miller Big Blue 400D owner's manual

NewArc

NewArc RT2000 Operational manual

Hypertherm

Hypertherm powermax1000 Operator's manual