Maytronics Dolphin Nautilus CC Plus User manual

English

Robot Pool Cleaner by Maytronics

User Instructions

Guide d’utilisation

Istruzioni per l’uso

Instrucciones para el Usuario

Bedienungsanweisungen

DEU

MBC8-UNI

8151246 REV. 01

English

What You’ll Find Inside the Box

Part X Comment

Base frame for ﬁlter elements 2

Filters

2/4 Filters

Depend on

model

Bag for ﬁlters storage 1

Power supply unit 1

Robot pool cleaner 1

Optional components available on request

from your robot pool cleaner distributor

Section 1 - Description of Main Components

1. Filters

Base frame + ﬁne or ultra-ﬁne cartridge

Depend on model

2. Brushes

There are three types of optional brushes, each designed to provide optimal traction on different pool surfaces.

Only one type set is provided with your robot pool cleaner.

PVC Brush

For concrete, PVC, ﬁberglass and liner.

Combined Brush

For rough ceramic surface and mosaic tiles.

Wonder Brush

For smooth ceramics.

Power supply Unit

Robot pool cleaner

Filter and cartridges

click

clickclick

click

clickclick

click

English

Only use the original supplied power supply unit.

The Power supply unit is splash proof – do not immerse it in water.

Unplug the power supply unit before any servicing activity.

Do not plug the power supply unit in before placing the pool cleaner in the water.

Ensure the mains outlet is protected by a ground fault interrupter (GFI) or an earth leakage interrupter (ELI).

Important: Do not enter the swimming pool while the pool cleaner is working.

Section 2 – Robot pool cleaner Operation

Part 1 – Preparing the Robot Pool Cleaner for Use

Laying out the cable

Unwind minimal required cable to cover the entire pool size, straight the cable along the pool side.

Make sure there are no twists or kinks.

On/Off

switch

On/Off

switch

3. Power supply unit

Digital, “Switch-Mode” power supply:

• Input - 100-250 AC Volts

• 50-60 Hertz

• 180 Watt

• Output - 30 VDC

• IP 54

Swivel

3 Meter

10 feet

English

Turning the robot pool cleaner ON

1. Plug the ﬂoating cable from the robot pool

cleaner into the power supply unit.

2. Plug the electrical cable from the power

supply unit into the mains.

3. Press the ON/OFF switch

4. The robot pool cleaner will now start to work.

Floating cable

On/Off

switch

Important: Do NOT enter the swimming pool while the pool cleaner is working.

Part 2 - Into the water

Inserting the robot pool cleaner into the pool.

Place the robot pool cleaner into the pool

and release the handle.

Note: When using the combined brushes or Wonder brushes, gently squeeze the Wonder brush material until it is totally wet.

English

Part 3 - Taking the robot pool cleaner out of the water

Unplug power supply before any servicing activity.

1. If the robot pool cleaner has not ﬁnished its cycle, turn off the power supply

unit and unplug the mains.

2. Pull the ﬂoating cable gently until the robot pool cleaner has risen to the

surface, then lift by the handle.

Important: Do NOT lift the robot pool cleaner from the water by its cable.

Section 3 - Routine Maintenance

Part 1 - Extracting and cleaning the ﬁlter elements

Unplug power supply before any servicing activity.

English

Reinstall the ﬁlters according to the diagram

DO NOT FORCE THE FILTERS INTO PLACE.

Grooved end ﬁtting Octagonal end ﬁtting

Recommendation: Rinse all brushes with clean water after each cleaning cycle.

Part 2 - Dismantling and cleaning the impeller

Unplug power supply before any servicing activity.

Dismantle the impeller cover and clean around

the impeller housing, then reassemble.

Reassembling the ﬁlter elements

Insert the locating tabs at the bottom of the

ﬁlter element into their groves on the base frame,

then close the “S” clip.

Locating tab

Locating tab groove

English

Coil the cable and store in dry cool area.

Do NOT store the robot pool cleaner exposed to direct sunlight.

Do NOT store the robot pool cleaner exposed to excessive heat.

Do NOT store the robot pool cleaner exposed to frost.

Section 4 – Storage Advice

Troubleshooting Guide

Before contacting your robot pool cleaner distributor please read through this guide.

The pool water condition must be within the following parameters:

PH: 7.0 – 7.8 NaCl: Max 5,000 ppm

Temperature: 6˚C(43˚F) to 34˚C(93˚F) Chlorine: Max 4 ppm

Symptom Solution

Cable twisting or cable coils up Check for any obstruction in the pool

Remove excess cable from the pool

Make sure ﬁlter cartridge is clean

Straighten cable and lay it in the sun periodically

Robot pool cleaner is moving in circles or does not reach

all pool areas

Check for foreign objects in moving parts

Make sure ﬁlter elements are clean and that the ﬁlter doors

are closed

Make sure that there is enough cable laid out to cover the

whole pool

Before using the robot pool cleaner at the beginning of the sea-

son you should brush any algae from the ﬂoor and walls

of the pool

Robot pool cleaner not sinking Make sure the Wonder brushes or the combined brushes are

soaked in water

Motor is not working

Check if the impeller is blocked

Check if the drive system is blocked

Electrical problem (power supply), check power source.

If power source is in order, please contact your robot pool

cleaner distributor

Robot pool cleaner ﬂips on its side Clean the ﬁlter cartridge

Additional troubleshooting is available at our Website:

www.maytronics.com

Table of contents

Other Maytronics Swimming Pool Vacuum manuals

Maytronics

Maytronics CLASSIC 8D-UNI User manual

Maytronics

Maytronics Dolphin Wave User manual

Maytronics

Maytronics Dolphin WAVE 50 User manual

Maytronics

Maytronics Dolphin M400 User manual

Maytronics

Maytronics Dolphin S100 User manual

Maytronics

Maytronics Classic 4-UNI User manual

Maytronics

Maytronics Supreme M4 User manual

Maytronics

Maytronics Dolphin Liberty 200 User manual

Maytronics

Maytronics Dolphin Basic 13 User manual

Maytronics

Maytronics Dolphin Wave 30 User manual

Maytronics

Maytronics Dolphin Mass 11 User manual

Maytronics

Maytronics Dolphin WAVE 100 User manual

Maytronics

Maytronics Dolphin Supreme M5 User manual

Maytronics

Maytronics PROX2 GYRO User manual

Maytronics

Maytronics Pulit E70 User manual

Maytronics

Maytronics Dolphin COMM. 12 User manual

Maytronics

Maytronics Dolphin Active Classic User manual

Maytronics

Maytronics 2x2 Gyro User manual

Maytronics

Maytronics Dolphin Nautilus CC User manual

Maytronics

Maytronics 8180090 User manual

Maytronics

Maytronics Dolphin Triton Ps User manual

Maytronics

Maytronics Swash CLX User manual

Maytronics

Maytronics Dolphin Liberty User manual

Maytronics

Maytronics MTC6 DELUXE 5 User manual

Popular Swimming Pool Vacuum manuals by other brands

POOLGOODS

POOLGOODS PoolGobbler Pro user guide

AREBOS

AREBOS AR-HE-BSR Original user manual

iRobot

iRobot Verro 600 owner's manual

Kokido

Kokido SKOOBA K535CBX/18/EU user manual

Dolphin

Dolphin 2x2 Gyro operating instructions

SmartPool

SmartPool Robo-Kleen PLUS user manual

Brilix

Brilix BARACUDA Installation and user guide

Aiper

Aiper Orca 1200 Pro user manual

Hayward

Hayward Navigator Pro manual

Polaris

Polaris Vac-Sweep 380 owner's manual

Pentair

Pentair Prowler 710 Installation and user guide

BWT

BWT D500 quick start guide

Kokido

Kokido xtrovac 70 instructions

Pentair

Pentair RACER Installation and user guide

Pentair

Pentair REBEL 2 owner's manual

Zodiac

Zodiac VX55 4WD owner's manual

SmartPool

SmartPool Robo Kleen Plus user guide

Steinbach

Steinbach Twin ORIGINAL OWNER'S MANUAL