Maytronics Dolphin M400 User manual

8151642

User Instructions.............. p. 1

Manuel d’utilisation ......... p. 12

Instrucciones de uso........ p. 23

Istruzioni per l’uso............ p. 34

Gebrauchsanweisung ...... p. 45

Gebruikersinstructies....... p. 56

Manual de instruções ...... p. 67

Инструкция по эксплуатации

p. 78

Dolphin M400 / M500

Dolphin M400 / M500 |User Instructions

Contents

1. INTRODUCTION ....................................................................... 2

2. SPECIFICATIONS....................................................................... 2

3. WARNINGS AND CAUTIONS ................................................... 2

3.1 Warnings............................................................................. 2

3.2 Cautions.............................................................................. 2

4. POOL CLEANER PARTS ............................................................ 3

5. USING THE POOL CLEANER.................................................... 4

5.1 Setup................................................................................... 4

5.2 Putting the Pool Cleaner into the pool............................... 5

5.3 Removing the Pool Cleaner from the pool ........................ 6

6. ROUTINE MAINTENANCE........................................................ 7

6.1 Cleaning the ﬁlter cartridges .............................................. 7

6.2 Dismantling and cleaning the impeller............................... 8

7. USING THE REMOTE CONTROL - M500 ONLY ....................... 9

8. OFF SEASON STORAGE........................................................... 11

9. TROUBLESHOOTING................................................................ 11

10. CADDY ASSEMBLY INSTRUCTIONS....................................... 89

Dolphin M400 / M500

User Instruction

Dolphin M400 / M500 |User Instructions

Dolphin M400 / M500

User Instruction

1. INTRODUCTION

Thank you for purchasing a Maytronics Robotic Pool Cleaner.

We are sure that your Maytronics Robotic Pool Cleaner will provide you with reliable, convenient and

cost effective pool cleaning. Its reliable ﬁltration in all pool conditions, active brushing, and all-surface

climbing brush enhance maximum pool hygiene.

The Robotic Pool Cleaners by Maytronics deliver advanced cleaning technology, long lasting

performance and easy maintenance. You and your family will be free to enjoy swimming with full

conﬁdence that your pool is completely clean.

2. SPECIFICATIONS

Motor protection: IP 68

Minimum depth: 0.80m/2.6ft

Maximum depth: 5m/16.4ft

3. WARNINGS AND CAUTIONS

3.1 Warnings

• Use the originally supplied power supply only

• Ensure the electrical outlet is protected by a ground fault interrupter (GFI) or an earth

leakage interrupter (ELI)

• Keep the power supply out of standing water

• Position the power supply at least 3.5m/12ft away from the edge of the pool

• Do not enter the pool while the Pool Cleaner is working

• Unplug the power supply before servicing

3.2 Cautions

When not in use store the Pool Cleaner on its Caddy in a shaded area.

Use the Pool Cleaner in the following water conditions only:

Chlorine Max 4 ppm

pH 7.0 - 7.8

Temperature 6-34°C / 43-93°F

NaCl Maximum = 5000 ppm

CAUTION

Digital switch-mode power supply

• Input - 100-250 AC VOLTS

• 50-60 Hertz

• 180 Watt

• Output - <30 VDC

• IP 54

Dolphin M400 / M500 |User Instructions

Combined Brush

All surface climbing brush,

ideal for most pool surfaces.

Wonder Brush

For smooth ceramics.

Remote Control Unit - M500 only

Brushes

Power supply unit - Options

Dolphin M400 / M500

Filtration

Cartridge with Net ﬁlters (X4) Ultra-ﬁne ﬁlter (X4)

(optional)

Caddy

Basic Advanced

4. POOL CLEANER PARTS

Dolphin M400 / M500 |User Instructions

5. USING THE POOL CLEANER

The Pool Cleaner is very simple to use. Simply put it into the pool and make sure that it is properly

sitting on the ﬂoor of the pool. Turn it ON and let it get the job done.

5.1 Setup

Before using the Pool Cleaner for the ﬁrst time perform the following steps:

Unwind the cable and stretch it out completely so that it has no kinks.

Some models arrive with plastic coverings on the brushes.

Remove them before use.

Adjusting the handle angle

The robot’s handle should be adjusted and locked diagonally in order to ensure optimum cleaning

results.

The handle angle can be adjusted also to determine the speed at which the robot advances along

the water-line.

To adjust the handle angle:

A. Press the latch down and hold it in position.

B. Move the handle to the desired position and release the latch to hold the handle in place.

Dolphin M400 / M500 |User Instructions

Position the power supply so that it is approximately in the middle of the long side of the pool at a

distance of min 3.5m/12ft from the pool and placed 11cm/4'' above ground.

Attach the ﬂoating cable to the power supply by inserting it with the notch on the connector (1)

lined up with the groove in the socket on the power supply and turning clockwise (2).

Plug in the power supply and leave it in the OFF position.

5.2 Putting the Pool Cleaner into the pool

If your Pool Cleaner is equipped with brushes that

contain sponges, dip the brushes in the water and

squeeze them so that they will absorb water the

ﬁrst time you use the Pool Cleaner, or if the brushes

have dried out between uses.

Release the Pool Cleaner and let it sink to the ﬂoor

of the pool.

Make sure that the ﬂoating cable is free of any

obstructions.

To avoid kinks in the ﬂoating cable, place

approximately enough cable in the water for the

Pool Cleaner to reach the farthest corner of the

pool.

Net ﬁlter

For rough debris

Dolphin M400 / M500 |User Instructions

Turn the power supply ON.

The Pool Cleaner will now operate until it has reached

the end of the cleaning cycle.

5.3 Removing the Pool Cleaner from the pool

CAUTION

Turn OFF and unplug the power supply.

Using the ﬂoating cable, bring the Pool Cleaner to the pool’s

edge.

Using the handle remove the Pool Cleaner from the pool.

CAUTION

DO NOT PULL THE POOL CLEANER FROM THE POOL USING THE CABLE.

OFF

Dolphin M400 / M500 |User Instructions

6. ROUTINE MAINTENANCE

6.1 Cleaning the ﬁlters of the cartridges

Unplug the power supply before any servicing activity.

Note:

Do not let the ﬁlters of the cartridges dry out before cleaning.

CAUTION

Open the ﬁlter covers and remove the

cartridges from both sides of the robot.

Open the clips and remove the ﬁlters.

Clean the ﬁlters with a hose.

Dolphin M400 / M500 |User Instructions

Reassembling the ﬁlter elements: Insert the locating tabs at the bottom of the ﬁlter element into their

grooves on the base frame then close the “S” clip.

Reinstall the base frames with ﬁlters according to the

diagram.

CAUTION

Do not force the ﬁlters into place.

6.2 Dismantling and cleaning the impeller

CAUTION

Unplug the power supply before cleaning.

Dismantle the impeller cover and clean around

the impeller housing, then reassemble.

(Use Phillips head screwdriver).

Octagonal

end

ﬁtting

Grooved

end

ﬁtting

Locating tab

Locating tab groove

“S” clip

Dolphin M400 / M500 |User Instructions

7. USING THE REMOTE CONTROL - M500 ONLY

The remote control unit offers two operation modes – automatic mode and manual direction control

mode.

In automatic mode, the cleaning parameters can be changed.

In manual direction mode, the robot’s motion can be controlled manually.

Radio reception meter

When no black lines are showing, move closer to

the robot

Battery level meter

When ﬂashing, change the batteries

Manual control indicator

When ﬂashing, you are in manual direction

control mode

Cleaning cycle icons

Delay timer icons

Cleaning mode icons

ON/OFF button

Manual/automatic select button

Set/OK button

Direction control arrows

Manual Direction Control Mode

1. Press the On/Off button once. The remote control will start in

manual direction control mode.

2. Use the direction control arrows (see right) to control the

movement of the robot around the pool.

Exiting Manual Direction Control Mode and setting the Automatic Mode

1. To exit the manual direction control mode, press the

Manual/Automatic select button once only.

2. The digital screen will light up and three rows of function

icons will be displayed in default mode.

1. To change the parameters press the up or down arrows.

2. To select the parameter settings use the right or left arrows.

When you reach the required function press the Set/OK

button.

Other manuals for Dolphin M400

This manual suits for next models

Table of contents

Other Maytronics Swimming Pool Vacuum manuals

Maytronics

Maytronics Dolphin Active Classic User manual

Maytronics

Maytronics Dolphin Swash TC User manual

Maytronics

Maytronics dolphin dx6 User manual

Maytronics

Maytronics MCC6 User manual

Maytronics

Maytronics Dolphin WAVE 50 User manual

Maytronics

Maytronics CLASSIC 8D-UNI User manual

Maytronics

Maytronics Dolphin SX20 User manual

Maytronics

Maytronics Pulit E70 User manual

Maytronics

Maytronics Dolphin Mass 13 User manual

Maytronics

Maytronics MBC5-UNI User manual

Maytronics

Maytronics Dolphin Wave 75 User manual

Maytronics

Maytronics Mass 10 User manual

Maytronics

Maytronics Dolphin W 20 User manual

Maytronics

Maytronics DOLPHIN DX4 User manual

Maytronics

Maytronics Dolphin Basic 4-UNI User manual

Maytronics

Maytronics Dolphin WAVE 100 User manual

Maytronics

Maytronics Dolphin Wave User manual

Maytronics

Maytronics 2x2 Gyro User manual

Maytronics

Maytronics BASIC 1 User manual

Maytronics

Maytronics Classic 4-UNI User manual

Maytronics

Maytronics Dolphin S100 User manual

Maytronics

Maytronics MBC8-UNI User manual

Maytronics

Maytronics Dolphin Skagerrak20 User manual

Maytronics

Maytronics Dolphin Nautilus User manual

Popular Swimming Pool Vacuum manuals by other brands

POOLGOODS

POOLGOODS PoolGobbler Pro user guide

AREBOS

AREBOS AR-HE-BSR Original user manual

iRobot

iRobot Verro 600 owner's manual

Kokido

Kokido SKOOBA K535CBX/18/EU user manual

Dolphin

Dolphin 2x2 Gyro operating instructions

SmartPool

SmartPool Robo-Kleen PLUS user manual

Brilix

Brilix BARACUDA Installation and user guide

Aiper

Aiper Orca 1200 Pro user manual

Hayward

Hayward Navigator Pro manual

Polaris

Polaris Vac-Sweep 380 owner's manual

Pentair

Pentair Prowler 710 Installation and user guide

BWT

BWT D500 quick start guide

Kokido

Kokido xtrovac 70 instructions

Pentair

Pentair RACER Installation and user guide

Pentair

Pentair REBEL 2 owner's manual

Zodiac

Zodiac VX55 4WD owner's manual

SmartPool

SmartPool Robo Kleen Plus user guide

Steinbach

Steinbach Twin ORIGINAL OWNER'S MANUAL