MAXDATA Favorit 500 User manual
I
FAVORIT 500 User’s Manual
MAXDATA FAVORIT 500
Fan-less Mini-PC with Intel® Atom Processor N270
User’s Guide
II
FAVORIT 500 User’s Manual
Congratulations on your purchase of the MAXDATA personal computer! We are confident that it will meet
We have taken all possible care to ensure that this manual contains correct, accurate information. However,
we cannot assume liability for any possible errors. Please refer to your dealer for reporting errors or
comments. We appreciate all feedback and are eager to incorporate any useful suggestions and
improvements. All rights reserved. No part of this manual may be reproduced, processed or distributed in any
form (print, photocopy, microfilm or any other process) or processed by an electronic system without prior
written permission of MAXDATA. Other brand names may be registered trademarks and must be treated as
such.
© Copyright 2009 MAXDATA GmbH, Marl
reference only. MAXDATA does not assume any liability
arising out of the applicat
contain or reference information and products protected by copyrights or patents and does not convey any
license under the patent rights of MAXDATA, nor the rights of others.
MAXDATA is registered trademark of Quanmax. All trademarks, registered trademarks, and trade names used
information proprietary to MAXDATA
MAXDATA name, cover, and
logo.
MAXDATA reserves the right to make changes without notice in product or component design as warranted by
evolution in user needs or progress in engineering or manufacturing technology. Changes which affect the
MAXDATA GmbH
Elbestraße 16
45768 Marl, Germany
Phone: +49 (0) 2365 877 002
Monday–Thursday from 08:00 until 17:30
Friday from 08:00 until 16:00
www.maxdata.de
info@maxdata.de
Revision
Date
Edited by
Changes
1.0
11/05/2009
SLee
Initial Release (MAXDATA)
2
Content
Figures & Tables
3
FAVORIT 500 User’s Manual
Figures & Tables
Figure 1 FAVORIT 500 dimensions drawing ...............................................................8
Figure 2 Front Panel...................................................................................................9
Figure 3 Rear Panel ..................................................................................................11
Figure 4 Connect the DVI cable................................................................................12
Figure 5 Connecting USB mouse & keyboard ..........................................................13
Figure 6 Network cable with RJ45 connector ..........................................................13
Figure 7 Turing on the system..................................................................................14
Figure 8 VESA mounting...........................................................................................14
Figure 9 VESA Mounting Kit Dimension...................................................................15
Figure 10 Use a Kensington lock ..............................................................................15
Table 1 FAVORIT 500 product specifications..............................................................8
Table 2 BIOS Main Menu..........................................................................................17
Table 3 IDE Device Setting Menu .............................................................................17
Table 4 System Information .....................................................................................18
Table 5 Advanced Menu...........................................................................................18
Table 6 OnBoard Peripherals Configuration Settings...............................................19
Table 7 Hardware Health Configuration...................................................................20
Table 8 Boot Menu...................................................................................................20
Table 9 Chipset Menu ..............................................................................................21
Table 10 Power Menu ..............................................................................................22
Table 11 Security Menu ...........................................................................................23
Table 12 Exit Menu...................................................................................................23
Safety Instructions
4
FAVORIT 500 User’s Manual
Safety Instructions
Before You Begin
Before handling the product, read the instructions and safety guidelines on the following
pages to prevent damage to the product and to ensure your own personal safety.
Always use caution when handling/operating a computer. Only qualified,
experienced, authorized electronics service personnel should access the interior
of a computer. The power supplies produce high voltages and energy hazards,
which can cause bodily harm.
Use extreme caution when installing or removing components. Refer to the
have any questions, please contact MAXDATA Post-Sales Technical Support.
WARNING
electrical outlet. Turn off system power, turn off the power supply, and then disconnect the
power cord from its source before removing the chassis cover. Turning off the system power
switch does not remove power to components.
When Working Inside a Computer
Before taking covers off a computer, perform the following steps:
1. Turn off the computer and any peripherals.
2. Disconnect the computer and peripherals from their power sources or subsystems to
prevent electric shock or system board damage. This does not apply when hot
swapping parts.
3. on the
following page.
4. Disconnect any telephone or telecommunications lines from the computer.
In addition, take note of these safety guidelines when appropriate:
To help avoid possible damage to system boards, wait five seconds after turning off
Safety Instructions
5
FAVORIT 500 User’s Manual
the computer before removing a component, removing a system board, or
disconnecting a peripheral device from the computer.
When you disconnect a cable, pull on its connector or on its strain-relief loop, not on
the cable itself. Some cables have a connector with locking tabs. If you are
disconnecting this type of cable, press in on the locking tabs before disconnecting the
cable. As you pull connectors apart, keep them evenly aligned to avoid bending any
connector pins. Also, before connecting a cable, make sure both connectors are
correctly oriented and aligned.
CAUTION
installation and troubleshooting instructions closely.
Preventing Electrostatic Discharge
Static electricity can harm system boards. Perform service at an ESD workstation and follow
proper ESD procedure to reduce the risk of damage to components. MAXDATA strongly
encourages you to follow proper ESD procedure, which can include wrist straps and smocks,
when servicing equipment.
You can also take the following steps to prevent damage from electrostatic discharge (ESD):
When unpacking a static-sensitive component from its shipping carton, do not remove
are ready to install the
component in a computer. Just before unwrapping the antistatic packaging, be sure
you are at an ESD workstation or grounded. This will discharge any static electricity
that may have built up in your body.
When transporting a sensitive component, first place it in an antistatic container or
packaging.
Handle all sensitive components at an ESD workstation. If possible, use antistatic floor
pads and workbench pads.
contacts
on a board. Hold a board by its edges or by its metal mounting bracket.
Do not handle or store system boards near strong electrostatic, electromagnetic,
magnetic, or radioactive fields.
Instructions for Lithium Battery
Safety Instructions
6
FAVORIT 500 User’s Manual
WARNING
Danger of explosion when battery is replaced with incorrect type. Only replace with
the same or equivalent type recommended by the manufacturer.
Do not dispose of lithium batteries in domestic waste. Dispose of the battery according to
the local regulations dealing with the disposal of these special materials (e.g. to the
collecting points for disposal of batteries)
Voltage Ratings
The external power adaptor of the FAVORIT 500 has the following voltage ratings:
Input: 100-240 VAC, 50-60 Hz
Output: 30W, 12VDC , 2.5A
Power Supplies:
Touch Electronic Co Ltd / SA06-30S12R-W
Lite-On Technology Corp / PA-1300-014XX ( X can be A-Z, 0-9,”-“ or blank)
Chapter 1
7
FAVORIT 500 User’s Manual
Chapter 1
Introduction
Overview
The FAVORIT 500 is a mini PC is ideal for space critical applications. This system is designed
with Intel® Atom N270 Processor which provides with excellent performance enabled by
next- generation 45nm Process Technology. The system is supported with Intel® 945GSE /
ICH7-M chipset, and DDR2 SO-
eSATA, Audio out, MIC in, GbE, USB 2.0 and DVI-I.
Checklist
FAVORIT 500
Power Adapter
Power Cord
Driver CD
Quick installation Guide
Optional VESA Mounting Kit
Optional wireless LAN antennas
Features
Ultra Quiet, Ultra Small, Ultra-Low Power
Intel® Atom Processor N270
Intel® 945GSE + ICH7-M
Support DDR2 533 SODIMM up to 2GB
Support 1x DVI-
Chapter 1
8
FAVORIT 500 User’s Manual
Product Specifications
Dimensions
170 x 47x 110 mm (WxHxD)
Weight
1.2 kg
CPU/ Chipset
Intel® Atom N270 Processor , 945GSE / ICH7-M
RAM
1 x DDR2 533 SO-DIMM up to 2GB
Storage
Front IO
1x Line-Out, 1x MIC-In
1x Push button for power on/off
1x Push button for reset
1x POWER LED
1x HDD LED
1x Wifi LED
2x USB2.0
1x eSATA connector
Rear IO
1x DC JACK
1x DVI-I connector for CRT or DVI output
2x USB2.0
1x RJ-45, GbE port
Wireless LAN
Optional Mini PCIe WI-FI Card
Cooling
Fanless
Power Unit
Input: 100-240 VAC, 50-60 Hz
Output: 30W, +12Vdc, 2.5A
Mounting
Desktop, VESA-mount
Certifications
CE, FCC Class B
Table 1 FAVORIT 500 product specifications
Figure 1 FAVORIT 500 dimensions drawing
Chapter 1
9
FAVORIT 500 User’s Manual
System tour
Refer to the diagrams below to identify the components of the system.
Front Panel
Figure 2 Front Panel
USB
The USB (Universal Serial Bus) port is compatible with USB devices such as keyboards,
mouse devices, cameras, and hard disk drives. USB allows many devices to run
simultaneously on a single computer, with some peripheral acting as additional
plug-in sites or hubs.
WiFi LED
When the data is transferring, the WiFi LED will blink.
eSATA
The eSATA connector provides an external connectivity for mass storage devices.
CAUTION
This connector do not support hot-swapping. Users should not connect or
disconnect their eSATA devices from PC when the system is working.
MIC-IN
The microphone jack is designed to connect the microphone used for video
conferencing, voice narrations, or simple audio recordings.
Other manuals for Favorit 500
1
Table of contents
Other MAXDATA Desktop manuals
MAXDATA
MAXDATA PCATXUK1.1 User manual
MAXDATA
MAXDATA FAVORIT XS Series User manual
MAXDATA
MAXDATA FUSION 6000 I User guide
MAXDATA
MAXDATA Favorit 500 User manual
MAXDATA
MAXDATA Ultra Small Desktop User manual
MAXDATA
MAXDATA QutePC?1000 User manual
MAXDATA
MAXDATA Workstation Fusion 7000 User manual
MAXDATA
MAXDATA Ultra Small Desktop User manual
