Lu 2000 User manual

LÜ 2000

USER MANUAL

User manual English

Prototype 2022

TABLE OF CONTENTS

WHAT'S IN THE BOX 4

INSTRUCTIONS 5

Connecting your Lü 5

Keyboard remote 7

Conguring your Internet network 8

Installing Lü in your classroom 10

How to turn on Lü 12

How to turn off Lü 12

CREATE AN ACCOUNT 13

NAVIGATION 14

System 14

Troubleshooting 15

Settings 16

LÜ COMMUNITY 17

How it works 17

Home page 18

FAQ 19

CONTACTS 20

SAFETY INSTRUCTIONS

Read and keep this manual.

The module must be placed upright (vertical) to allow the circulation of heat.

Placing the module at on a surface may cause the system to overheat.

The information and specications contained in this user manual are subject

to change without notice.

WARNING

WHAT'S IN THE BOX

4 tie wraps

Prototype case and its support Rii keyboard remote

2 wall hooks

Charging cord

for the Rii remote

USB receiver

for the Rii remote

Ethernet cable

D E Z

HDMI cable USB 2.0 cable USB 3.0 cable

* Depending on your interactive whiteboard model, one

of the two cables will be compatible with it. *

* Not included in the box *

Power cord

B1 B2

INSTRUCTIONS

Connecting your Lü

01 

A. HDMI cable

To project the image onto the interactive whiteboard.

B. The USB 2.0 or 3.0 cable

For the touchscreen feature of the interactive whiteboard.

C. The power cord

D. The USB receiver of the Rii keyboard remote

Make sure that the USB receiver of the keyboard remote control is

connected to the device.

E. The Ethernet cable

You have the choice between a Wi connection or a wired connection.

The wired connection will offer you a better quality connection and will be

more stable.

02 Plug the other end of the power cord ( C) into a working outlet.

03 Plug the HDMI cable into an available HDMI port on

the back of your interactive whiteboard.

04 Plug the USB 2.0 or 3.0 into the Touch

port on your interactive whiteboard.

Attention! You must plug this cord into the Touch

port next to the HDMI port you are using for the Lü

05 Make sure that all of the cords are securely connected before moving

to the next step.

06 If you haven’t already done so, turn on your interactive whiteboard and select

the source that corresponds to the HDMI jack you plugged your system into.

Wait around ten seconds for the system to start up and bring up the

applications.

B1 B2

Keyboard remote

Volume

Pause / Start

ON / OFF switch USB charging port

Open Windows

taskbar

Move

selection

Select

button

Quit game +

OK to conrm

Conrm

the selection

and start the

game

3 4

1Left click 2Right click 3Mute 4Web browser 5Open “Documents”

Advanced shortcuts with the keyboard remote

• Press « Win » to open Windows taskbar.

• 

• 

• 

Conguring your Internet network

You have the choice between a Wi connection or a wired connection.

The wired connection will offer you a better quality connection and will be more

stable.Contact your IT department if needed.



01 Press the WIN button on the keyboard remote control.

02 

03 Click on the name of the available network in your institution.

04 Close the window by clicking on the X in the upper right corner.

If necessary, your school's IT department will be able to help you nd the most

suitable network for the Lü system.



01 

02 Our operations make automatic updates so that you have the new

applications.

03 Some apps use your school’s network to retrieve content created online or

even save game modes within the app.



On the wall

01 Insert 2 screws or hooks into the wall using the

template provided in the box.

If you use the screws, do not screw them all the

way in, leave the tip protruding about 5 mm.

02 Make sure the system is upright and align

the 2 holes behind the module with the 2 screw

heads or hooks on the wall.

03 

hooks on the wall through the narrowest part

of the holes and lock your system in a secure

position.

Behind your interactive whiteboard

01 Insert the tie wraps into the slots provided in the

4 upper and lower corners of your module.

02 Attach your module to a secure place behind

your interactive whiteboard (wire cover,

support).

03 Tighten the tie wraps and cut the excess.

Installing Lü in your classroom

INSTALLATION TEMPLATE FOR HOOKS OR SCREWS