Linksys WPC11 User manual

A Division of Cisco Systems, Inc.

Model No.

Wireless Quick Installation Guide

Wireless

Quick Installation Guide

Model No.

WPC11 (UK/EU)

Notebook Adapter

Wireless-B

Package Contents

• Wireless-B Notebook Adapter

• Setup Wizard CD-ROM with Multi-language

Quick Installation Guide and User Guide

(English only)

• Quick Installation

GHz

802.11b

AInsert the Setup Wizard CD-

ROM into your CD-ROM drive.

The Setup Wizard should run

automatically, and the Wel-

come screen should appear. If

it does not, click the Start but-

ton and choose Run. In the

field that appears, enter

D:\setup.exe (where “D” is the

letter of your CD-ROM drive.

BTo install the Adapter, click the

Install button on the Welcome

screen.

CAfter reading the License

Agreement, click the Next but-

ton if you agree, or click the

Cancel button to end the

installation.

DThe Setup Wizard will ask you to

choose a wireless mode. Click

the Infrastructure Mode radio

button if you want your wireless

computers to network with

computers on your wired net-

work using a wireless access

point. Click the Ad-Hoc Mode

radio button if you want multi-

ple wireless computers to net-

work directly with each other.

Software Installation and Configuration

for Windows 98SE, Me, and 2000

NOTE TO WINDOWS XP USERS: Go directly to Step 2.

In the SSID field, enter the SSID

of your wireless network. The

SSID must be identical for all

devices in the network. The

default setting is linksys (all low-

ercase). Click the Next button.

EIf you chose Infrastructure

Mode, go to step F now.

If you chose Ad-Hoc Mode,

select the correct operating

channel for your network. The

channel you choose should

match the channel set on the

other devices in your wireless

network. Click the Next button,

and go to step F.

FThe Setup Wizard will ask you to

review your settings before it

starts to copy files. Click the Yes

button to save these settings,

or click the No button to

change any settings.

GAfter the files have been suc-

cessfully copied, the following

screen will appear. Click the

Exit button.

Proceed to Step 2.

NOTE FOR WINDOWS 2000 USERS: A

Digital Signature Not Found screen may

appear during the installation of the

driver. The Adapter has been tested and

is compatible with Windows 2000. Click

the Yes button to continue.

ATurn off your notebook PC.

BLocate an available PCMCIA

slot on your notebook PC.

CInsert the Adapter with the label

side facing up, so the Adapter

fits snugly in the PCMCIA slot.

DTurn on your notebook PC.

EWindows will begin installing the

driver files in your operating sys-

tem. If Windows asks you for the

original Windows CD-ROM,

insert the CD-ROM, and direct

Windows to the proper location

for the CD-ROM (e.g., D:\).

Windows 98SE, Me, and 2000 users:

Congratulations! The installation of

the Wireless-B Notebook Adapter is

complete.

Windows XP users: Proceed to

Step 3.

Connecting the Notebook Adapter

NOTE FOR WINDOWS 2000 USERS: A

Digital Signature Not Found screen may

appear during the installation of the

driver. The Adapter has been tested and

is compatible with Windows 2000. Click

the Yes button to continue.

AWindows XP will automatically

detect the Adapter. Insert the

Setup Wizard CD-ROM into your

CD-ROM drive. Click the radio

button next to Install the soft-

ware automatically (Recom-

mended). Then click the Next

button.

BAfter Windows has finished

installing the driver, click the

Finish button.

CAfter installing the Adapter, the

Windows XP Wireless Zero Con-

figuration icon will appear in

your computer’s system tray.

Double-click the icon.

3Driver Installation and Configuration for

Windows XP

IMPORTANT FOR WINDOWS XP USERS: DoNOT runtheWireless-BNotebookAdapter

Setup Wizard. If the Setup Wizard runs automatically after the Setup Wizard CD-

ROM has been inserted, click the Exit tab.

NOTE: Windows XP has a built-in con-

figuration tool. Use the Windows XP

Wireless Zero Configuration (in the sys-

tem tray at the bottom of your screen)

to configure the Adapter.

NOTE: A screen that mentions Windows

XP compatibility may appear. The

Adapter has been tested and is com-

patible with Windows XP. Click the Con-

tinue Anyway button to continue.

DThe screen that appears will

show any available wireless

network. Select the network you

want.

If this network has WEP encryp-

tion enabled, go to Sep E.

If this network does not have

WEP encryption enabled, then

the screen in Figure D will

appear. Make sure the box

next to Allow me to connect to

the selected wireless network,

even though it is not secure is

checked. Then click Connect,

and go to Step F.

NOTE: Steps D and E are the instruc-

tions and screenshots for Windows XP

with Service Pack 1 installed. If you

have not installed Service Pack 1,

select the network you want, and click

the Connect button. If the network has

WEPencryptionenabled,entertheWEP

key in the Network key field, and then

click the Connect button.

EIf WEP is enabled, the screen in

Figure E will appear. Enter the

WEP key of your wireless net-

work in the Network key field,

and re-enter it in the Confirm

network key field. Then click

Connect.

FThe screen in Figure F will

appear if your connection is

active.

For more information about WEP,

refer to your access point’s user

guide, or visit

www.linksys.com/international.

For more information about wireless

networking on a Windows XP com-

puter, enter the keyword wireless in

the Windows XP search engine.

Windows XP users: The installation

of the Wireless-B Notebook Adapter

is complete.

WPC11-UK-EU_V4-QIG-40413AJL

For additional information or troubleshooting

help, refer to the User Guide on the CD-ROM

or the Technical Support Insert. You can also

e-mail for further support.

Website

http://www.linksys.com/international

Linksys is a registered trademark or trademark of

Cisco Systems, Inc. and/or its affiliates in the U.S.

NOTE: Windows XP Wireless Zero Con-

figuration does not support the use of a

passphrase. Enter the exact WEP key

used by your access point. E

A Division of Cisco Systems, Inc.

Model No.

Wireless Quick Installation Guide

Trådløs

Installationsvejledning

Modelnr.

WPC11 (DK)

Notebook-adapter

Trådløs-B

Pakkens indhold

• Trådløs-B Notebook-adapter

• Cd-rom med guidet konfiguration og

brugervejledning (kun på engelsk)

• Installationsvejledning

GHz

802.11b

APlacer cd-rom’en med guidet

konfiguration i cd-rom-drevet.

Den guidede konfiguration

køres automatisk, og figur A

vises. Hvis det ikke er tilfældet,

skal du klikke på knappen Start

og vælge Run (Kør). Indtast

D:\setup.exe (hvor “D” er

bogstavet for cd-rom-drevet) i

det felt, der vises.

BInstaller adapteren ved at

klikke på knappen Install i

skærmbilledet Welcome.

CKlik på knappen Next, når du

har læst License Agreement.

DDet guidede konfiguration

giver dig mulighed for at

vælge en trådløs tilstand. Klik

på alternativknappen Infra-

structure Mode, hvis dine

trådløse computere, skal

oprette netværksforbindelse til

computere i det kabelbaser-

ede netværk ved hjælp af et

trådløst access point. Klik på

alternativknappen Ad-Hoc

Mode, hvis flere trådløse com-

putere skal oprette netværks-

forbindelse direkte til hinanden.

Indtast SSID’et for det trådløse

netværk i feltet SSID. SSID’et

skal være identisk for alle

enheder i netværket. Stan-

Driverinstallation og konfiguration i

Windows 98SE, Me og 2000

VIGTIGE OPLYSNINGER TIL WINDOWS XP-BRUGERE: Fortsæt til trin 2.

dardindstillingen er linksys

(små bogstaver). Klik på knap-

pen Next.

EHvis du vælger Infrastructure

Mode, skal du gå til trin F nu.

Hvis du vælger Ad-Hoc Mode,

skal du vælge den korrekte

kanal til netværket. Den valgte

kanal skal passe til den kanal,

der er indstillet på de andre

enheder i det trådløse

netværk. Klik på knappen Next.

FI følgende skærmbillede bliver

du bedt om at gennemse ind-

stillingerne, inden filerne

kopieres. Klik på knappen Yes

for at gemme disse indstill-

inger, eller klik på knappen No

for at ændre indstillingerne.

GNår filerne er kopieret, vises føl-

gende skærmbillede. Klik på

knappen Exit.

Fortsæt til trin 2.

Other manuals for WPC11

Table of contents

Popular Adapter manuals by other brands

PCB Piezotronics

PCB Piezotronics 090B274 Installation and operating manual

Auvidea

Auvidea J20 Technical reference manual

Gossen MetraWatt

Gossen MetraWatt AT3-III E operating instructions

Akribis

Akribis ITF-21-BISS-MIT user manual

Tenda

Tenda W54U user guide

ROHO

ROHO AGILITY Operation manual

PROLiNK

PROLiNK WN2001 Quick installation guide

Hawking

Hawking HUF2 Specifications

Airlink101

Airlink101 AWLC4030 user manual

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter user manual

Philips

Philips SWA4554S/10 user manual

JVC

JVC TS-C9D2B Assembly and installation instructions

NETGEAR

NETGEAR A6100 quick start

D-Link

D-Link DWA-121 Quick install guide

Philips

Philips SWA2037 Specifications

Basalte

Basalte 0610-20 installation manual

Yealink

Yealink EHS40 user guide

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A installation guide