Lilliput A10 User manual
2
User Guide
3
IMPORTANT SAFETY INSTRUCTIONS:
Please read User Guide before using this product.
Please keep User Guide for future reference.
Please read the cautions to prevent possible danger and loss of
property.
FEATURES:
High resolution: 3840×2160;
Wide voltage: DC 12-24V;
High brightness: 400cd/㎡;
High contrast: 1500:1;
Visual menu icon;
Quad view display.
CAUTIONS:
1. Please do not place the display screen towards the ground.
2. Please avoid heavy impact or drop onto the ground.
3. Please do NOT use chemical solutions to clean this product. Please
wipe with a clean soft cloth to maintain the brightness of the surface.
4. Please do not block any vent hole.
5. Please follow the instructions and trouble-shootings to adjust the
product. Other improper adjustment may result in damage. Any further
adjustment must be performed or conducted by a qualified technician.
6. Please unplug the power and remove the battery if long-term no-use,
or thunder weather.
YP-01160908
4
Contents
1. PRODUCT DESCRIPTION................................................. 5
2. DV BATTERY MOUNT PLATE.......................................... 6
3. MENU SETTING................................................................... 7
7. ACCESSORIES.................................................................. 10
8. PARAMETERS....................................................................11
9. TROUBLE SHOOTING......................................................11
5
1. PRODUCT DESCRIPTION
1．MENU Dial：
Menu key：Press the dial to display menu on the screen when
screen is lit.
Options key ：Left or right sliding the dial in the menu screen to
select the desired menu option.
Confirm key：Press the dial to confirm the selected option.
2．EXIT：
To return or exit the menu function.
3．F1、F2 User-definable buttons：Long press F1 or F2 key for 3-5
seconds to pop-up shortcut menu directly. As shown in Figure
(default menu button in white font).
F1：Display Model F2：Disp Rotate
4. / INPUT
Power：Long press for 3 or 5 seconds to power ON/OFF.
6
Switch：Short press to switch among of VGA，DP，HDMI 1，HDMI
2，DVI and SDI.
5．SDI input/output interface.
6．DVI / VGA input interface.
7. HDMI input interface.
HDMI 1: HDMI2.0, support 4K 60Hz
HDMI 2: HDMI1.4, support 4K 30Hz
8. DP input interface.
9. Speaker.
10. DC 12V power input.
11. Battery plate switch.
2. DV BATTERY MOUNT PLATE
Standard mounts process
1First place battery plate into the slot, then slide the switch to left.
2Then slide the battery plate down into the slot.
Following Four types of battery plates are suitable for this device, model
F970, QM91D, DU21 & LP-E6 (choose 2 out of 4).
MODEL: F-970 MODEL: QM91D MODEL: DU21 MODEL: LP-E6
7
DV Battery Mount Plate Specification:
Model DU21 for battery of Panasonic DV:
NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK series, comply with
Panasonic battery DU06/VBD140/SANYO DZhs301sw/Hitachi
DZ-HS303SW/BZ-BP14S/DZ3200/BP07W.
Model QM91D for battery of SONY DV:
DSCR1/F/S/MVCCD/E/HC15E/HC1E/AE1u/DCRTRV828/E/CCD-TRV
116/DCR-DVD/PS105K/300K/10P/1E series.
Model F970 for battery of SONY DV:
DCR-TRV series, DCR-TRV E series, VX2100E PD P series, GV-A700,
GV-D800 FD/CCD-SC/TR3/FX1E/HVR-AIC, HDR-FX1000E, HVR-Z1C,
HVR-V1C, FX7E F330.
Model LP-E6 for battery of Canon DSLR:
5D Mark II/5D Mark III/EOS6D/EOS7D/EOS60D/EOS70D；
3. MENU SETTING
Before setting the functions, please make sure the device is
connected correctly.
3-1. F1~F2 User-definable function buttons:
Long press any F1-F2 key for 3-5 seconds to pop-up shortcut menu
directly. As shown in Figure (default menu button in white font).
Select option via sliding to the left or right.
Press to confirm option as default, then press EXIT to exit.
Functions of F1-F2 buttons can also be customized: Center Marker,
Safety Marker, Aspect, Underscan, Check Filed, Freeze, Auto,
Peaking, Display Model and Disp Rotate.
F1-F2：2 user-definable function buttons
Default function:
F1：Display Model F2：Disp Rotate
8
3-2. Dial
Sliding the dial to activate the volume bar when not under the menu
display
Slide the dial to adjust the value of option directly.
Press “EXIT” to exit if accidentally enter the menu.
After enter the Volume menu, press the dial to select among of
Volume, Brightness, Contrast, Saturation, Hue, Sharpness, Backlight,
Menu and Exit.
3-3. MENU Operation
When power on, press dial on the device, the menu of function setting
will display on the screen.
Sliding the dial to select the menu option;
Then press the dial to confirm;
Press“INPUT/EXIT”button to exit menu.
9
Picture
Brightness
0~100
Contrast
0~100
Saturation
0~100
Hue
0~100
Sharpness
0~4
Temperature
9300, 7500, 6500, 5800, User (R.G. B)
Backlight
0~100
Function
Center Marker
ON, OFF
Safety Marker
OFF, 95%, 93%, 90%, 88%, 85%, 80%
Aspect
Full screen, 16:9, 17:9, 4:3, 1.85:1, 2.35:1
Underscan
ON, OFF
Check Filed
OFF, Red, Green, Blue
Freeze Input
ON, OFF
Peaking
ON, OFF
Display Mode
1P，2P LR，2P TB，2P PIP，4P
Display Setting
Display Rotate
0°，90°，180°，270°
Available when single
display.
LR Ratio
0~4
Available when dual
display on left and
right.
Input Swap
Select Region
Menu setting to region selected according to users’ needs.
Input
Signal switch to region selected according to users’ needs.
Audio
Volume
0~100
Audio Source
Analog，Digital 1，Digital 2，Digital 3，Digital 4。
VGA
Auto Adjust
Press to confirm after selected.
Only for
adjusting
VGA
signal
modes.
H Position
0~100
V Position
0~100
Clock
0~100
Phase
0~100
System
Reset
Press to confirm after selected.
Menu Time
5~60s
OSD H Position
0~100 (To set menu display area)
OSD V Position
0~100 (To set menu display area)
Language
English, Chinese
Transparency
0~255 (To set menu transparency)
OSD Rotate
0°，90°，270°
Border Width
0~10
Border Color
R, G, B, W
Info
To display current information.
10
7. ACCESSORIES
Standard:
1. 12V DC adapter 1 piece
2. Folding sun shade cover 1 piece
3. HDMI A/C cable 1 piece
4. DVI to VGA connector 1 piece
5. Battery plate(QM91D, DU21, F970 or LP-E6) 2 pieces
6. VESA battery plate 1 piece
7. Shoe mount 1 piece
8. Manual 1 copy
Optional:
1. HDMI A/A cable （support 4K）1 piece
2. V-mount or Anton bauer mount 1 piece
3. VESA folding bracket 1 piece
4. Li-ion Battery 1 piece
11
8. PARAMETERS
9. TROUBLE SHOOTING
1. Only black-and-white display:
Check whether the color saturation is properly setup or not.
2. Power on but no pictures:
Check whether the cables of VGA, DP, HDMI, DVI and SDI are correctly
connected or not. Please use the standard power adapter coming with the
product package. Improper power input may cause damage.
3. Wrong or abnormal colors:
Check whether the cables are correctly and properly connected or not.
Broken or loose pins of the cables may cause a bad connection.
4. When on the picture shows size error:
Press “MENU → FUNCTION → Underscan” to zoom in/out pictures
automatically when receiving HDMI signals
5. Other problems:
Please press dial button and choose “MENU→SYSTEM→ Reset →ON”
6. According to the ISP, the machine can not function properly:
ISP for program upgrades, non-professionals do not use. Please reboot
your device if press accidentally!
Note: due to constant effort to improve products and product
features, specifications may change without notice.
Panel
10.1”8bit
Physical Resolution
3840×2160
Brightness
400 cd/㎡
Contrast
1500: 1
Viewing Angle
160°/ 160°(H/V)
Input Voltage
DC 12-24V
Input Signal
VGA, Display Port, HDMI 1, HDMI 2, DVI, SDI
Power Consumption
≤12W
Operating Temperature
-20℃~60℃
Storage Temperature
-30℃~70℃
Dimension (LWD)
252×157×25mm
Weight
600g
Table of contents
Other Lilliput Monitor manuals
Lilliput
Lilliput BM280-4K User manual
Lilliput
Lilliput T5 User manual
Lilliput
Lilliput 665WH User manual
Lilliput
Lilliput 5DII User manual
Lilliput
Lilliput 1/C/T Assembly instructions
Lilliput
Lilliput PVM150S User manual
Lilliput
Lilliput 667GL User manual
Lilliput
Lilliput RM-503S User manual
Lilliput
Lilliput PVM220S User manual
Lilliput
Lilliput FA1019/T User manual
Lilliput
Lilliput 667/S User manual
Lilliput
Lilliput BM280-4K-VBP User manual
Lilliput
Lilliput UMTC-1400 User manual
Lilliput
Lilliput BM230 User manual
Lilliput
Lilliput Mopro 7 User manual
Lilliput
Lilliput RM7028 User manual
Lilliput
Lilliput 619AT User manual
Lilliput
Lilliput Q17 User manual
Lilliput
Lilliput 869GL User manual
Lilliput
Lilliput FA1000 User manual
