Lilliput 668GL-70NP/H/Y User manual
COLOR TFT LCD
MONITOR
Manual
DEAR CUSTOMERS
Thank you for purchasing the liquid crystal display monitor. This product employs
new integrate circuits and high quality TFT LCD modules. It is putting out with its
low power consumption, emits no radiation, and other advantage characteristics. This
product is shaped with modern style and is easy to be carried with. The color TFT
LCD is the most suitable display for VGA,VCD, DVD and GPS system for motorcars
and ships .It also can be used in the office ,in flat ,at home also in other suitable
position. You will certainly benefit from this monitor in lots of ways, to name some of
them: convenience, safety, space-saving.
We hope that you will have the enjoyment of your new mini color TFT LCD.
To ensure the best use of the unit, please read this handbook carefully beforehand
.
CAUTION
1. Please use the adapter attached in the accessory.
2. Do not expose this product to direct sunlight, heat or humid conditions.
3. Keep away from strong light while using this product so as to obtain the
clearest and the most colorful picture.
4. Please avoid heavy impact or drop onto the ground.
5. Do not use chemical solutions to clean this unit. Please simply wipe with a
clean soft cloth to keep the brightness of the surface.
6. If the product does not operate normally when the instructions are followed.
Adjust only those controls that are covered by the instructions. Improper
adjustment of other controls may result in damage and will often require
extensive work of a qualified technician.
Please unplug the power if non-use for a long-term, or a thunder and happens.
CONTENTS
1. PRODUCT DESCRIPTION --------------------
2. REMOTE CONTROL----------------------------
3. BATTERY INSTALLATION INSTRUCTION
4. MENU OPERATION ----------------------------
IN YPbPr MODE----------------------------------
IN HDMI MODE----------------------------------
IN AV MODE--------------------------------------
5. ACCESSORIES -----------------------------------
6. PARAMETER -------------------------------------
7. TROUBLESHOOTING --------------------------
8. REMARK-------------------------------------------
1
1.
PRODUCT DESCRIPTION
2
1．Infrared receiving window
2．Battery indicator light
3．-：Volume down or to adjust the value of menu setting function
4．+：Volume up or to adjust the value of menu setting function
5．MENU：To activate OSD menu
（
（（
（PS: Long press "MENU" button to zoom in or out picture
automatically when receiving HDMI signal.)
6．<：Selection key, to select item on the OSD or push the key in PC mode
directly to adjust phase automatically
7．>：To select function on OSD or to adjust the brightness directly under 6
classes
8．A/V：HDMI、YPbPr、VIDEO1 and VIDEO2 switch
9．POWER：Power on/off
10．Sun shade
11．Mounting socket (right side)
12．Y signal input
13．Pb signal input
14．Pr signal input
3
15．AV1 signal input
16．AV2 signal input
17．AUDIO signal input
18．Battery control switch
19．DC input
20．HDMI signal input
21．Battery slot
22．Mounting socket (bottom)
2.
REMOTE CONTROL
1．MUTE
2．Display Mode：HDMI、YPbPr、VIDEO1、VIDEO2 switch
3． ：Left move，Volume down or to adjust the value of setting function
4． ：Down move, to adjust phase automatically under PC mode
5．POWER ON/OFF
6． ：UP move, to adjust the brightness directly under 6 classes
4
7．MENU
8． ：Right move, Volume up or to adjust the value of setting function
3.
BATTERY INSTALLATION INSTRUCTION
1．
Open battery cover
2．
Battery
3．
Please plug power line into main board’s battery socket.
P
ower line
5
4．
Put the battery into slot when check the electricity.
5．
Lock battery cover up to finish installation.
Battery control
switch
6
PS: please switch battery control off if non-use for a long-term.
4.
MENU OPERATION
After connected correctly and then Power on, Press “MENU” on the unit or by remote
control to show MENU.
IN YPbPr MODE
Press “</>”on the unit or “ / ” on the remote control to select item, eg. ,
and it will be highlighted; and then press +/ - of the unit or / to adjust the
favorite values.
BRIGHTNESS: to adjust the luminance of brightness
CONTRAST：to adjust the level of contrast
SATURATION: to adjust the level of saturation
TINT:
to adjust the hue of image
OSD H-POSITION ADJUSTMENT: to adjust the OSD move in horizontal
direction
OSD V-POSITION ADJUSTMENT: to adjust the OSD move in vertical
direction
RESET: you can reset adjustment of the unit when click “YES”
7
COLOR TEMPERATURE：choose color and temperature at first, such as: 6500
0
K, 7500
0
K or 9300
0
K.
Only if under “USER” mode, can adjust RED, GREEN and
BLUE to meet the color value you need.
LANGUAGE：There are 2 languages provided for choice, English and Japanese
MISCELLANEOUS：to select to enter next page
As follows:
OSD MISCELLANEOUS OFYPBPR MODE
picture over-turn to left or right
picture over-turn to up or down
mode shift between 4:3 and 16:9
EXIT OSD: select “YES” to exit
IN HDMI MODE
Table of contents
Other Lilliput Monitor manuals
Lilliput
Lilliput 629GL-70NP User manual
Lilliput
Lilliput PVM220S User manual
Lilliput
Lilliput FA1045 User manual
Lilliput
Lilliput 1/C/T Assembly instructions
Lilliput
Lilliput 664/P User manual
Lilliput
Lilliput PVM210 User manual
Lilliput
Lilliput A11 User manual
Lilliput
Lilliput FA1011 User manual
Lilliput
Lilliput 619AT User manual
Lilliput
Lilliput FA1012 User manual
Lilliput
Lilliput Q17 User manual
Lilliput
Lilliput TK701 User manual
Lilliput
Lilliput BM280-4K-VBP User manual
Lilliput
Lilliput 664W User manual
Lilliput
Lilliput A7S User manual
Lilliput
Lilliput 667/S User manual
Lilliput
Lilliput T5 User manual
Lilliput
Lilliput RM-503S User manual
Lilliput
Lilliput 5DII User manual
Lilliput
Lilliput UMTC-1400 User manual
