Lilin Ultra Series User manual
166-UM-IVSCAM-CSE-1
LILIN Ultra, S and ZS series IVS Camera User Manual
Chapter 1 IVS Features.................................................................................................................2
1.1 The following situations IVS might not work........................................................................2
1.2 The Border of Non-detection Area........................................................................................2
1.3 IVS Setting................................................................................................................................2
Chapter 2 Instruction for IVS Features........................................................................................3
2.1 Motion Detection......................................................................................................................3
2.1.1 Motion Detection Configuration..........................................................................................3
2.2 Tampering Detection...............................................................................................................4
2.2.1 Tampering Detection Configuration...................................................................................4
2.3 Tripwire......................................................................................................................................5
2.3.1 Tripwire Configuration..........................................................................................................5
2.4 Traffic Light Detection (Semaphore + Tripwire Detection)................................................6
2.4.1 Traffic Light Detection Configuration.................................................................................6
2.5 Object Counting........................................................................................................................7
2.5.1 Object Counting Configuration ...........................................................................................7
2.6 Unattended Object Detection (Object Left Detection)........................................................8
2.6.1 Unattended Object Detection Configuration.....................................................................8
2.7 Missing Object Detection (Object Remove Detection).......................................................9
2.7.1 Missing Object Detection Configuration............................................................................9
2.8 Crowd Detection (Density Detection)..................................................................................10
2.8.1 Crowd Detection Configuration ........................................................................................10
2.9 Loitering Detection.................................................................................................................11
2.9.1 Loitering Detection Configuration.....................................................................................12
2.10 Face Detection.....................................................................................................................13
2.10.1 Face Detection Configuration.........................................................................................13
2.11 Audio Detection....................................................................................................................14
2.11.1 Audio Detection Configuration........................................................................................14
Appendix........................................................................................................................................16
266-UM-IVSCAM-CSE-1
Chapter 1 IVS Features
1.1 The following situations IVS might not work
⚫In the rainy day, the rain drops block the FOV for the detected objects.
⚫In the foggy environment, the fog blocks the detected objects.
⚫The reflection caused by sunshine and mirror
⚫The large object blocks the detected objects.
⚫Blurry video in a strong wind installation
⚫The detected objects and the background are too similar.
⚫The shadows of people might be detected.
⚫The motion blocks and tripwire are on top of a tree or the shadow of the tree.
⚫The spider nest on top of the camera cover
1.2 The Border of Non-detection Area
The edge (5% FOV) of the camera view is the non-detection area. Make sure that the target
objects should avoid the non-detection area during camera installation. The edge of non-
detection area is for the camera’s OSD and the tolerance against camera vibration caused
by wind.
1.3 IVS Setting
IVS settings are described below:
366-UM-IVSCAM-CSE-1
Chapter 2 Instruction for IVS Features
2.1 Motion Detection
Motion detection (L Series, Pro Series, Z Series, M Series, Ultra, and S Series) detects motion in a
scene, the area can be customised and the sensitivity adjusted to suit specified requirements
Note:LILIN Ultra and S series IVS use advance motion detection technology that is to change the
way motion detection is handled by the camera. With a four-pass filter for separating motion objects,
this results in a more accurate motion detection algorithm, lowering false alarms and other recording
triggers.
2.1.1 Motion Detection Configuration
To enable Motion Detection on the camera, follow the steps below:
⚫Click on IVS tab on the left.
⚫Select Motion Detection, Face Detection, Tampering Detection and click Submit button to
save the changes.
⚫Click on Motion Detection tab on the left.
⚫Enable Motion Detection feature.
⚫Use a mouse drag on the video blocks.
⚫Change Motion Sensitivity according to the motion activities. (Low:99~High:1)
⚫Click Submit button to save the changes.
466-UM-IVSCAM-CSE-1
2.2 Tampering Detection
An alarm is triggered automatically when the camera detects if someone attempts to cover, vandalize
or move the lens.
2.2.1 Tampering Detection Configuration
To setup Tampering Detection on the camera, follow the steps below:
⚫Click on IVS tab on the left.
⚫Select Motion Detection, Tampering Detection and click Submit button to save the changes.
⚫Click on Tampering Detection tab on the left.
⚫Enable Tampering Detection feature.
⚫Adjust Tampering Detection Time and Dwell Time.
⚫Click Submit button to save the changes.
566-UM-IVSCAM-CSE-1
2.3 Tripwire
Tripwire allows up to 8 lines or rectangles to be drawn within a camera image, movement from either
direction across this line will trigger a motion detection alarm.
2.3.1 Tripwire Configuration
To setup Tripwire on the camera, follow the steps below:
⚫Click on IVS tab on the left.
⚫Select Tripwire, Semaphore + Tripwire and click Submit button to save the changes.
⚫Click on Motion Detection tab on the left and Edit button on the bottom.
⚫Enable motion detection feature.
⚫Motion Detection Type to be selected Tripwire.
⚫Select Area to be selected Zone.
⚫Use a mouse drag on the video.
⚫Change motion sensitivity according to the motion activities.
⚫Click Submit button to save the changes.
666-UM-IVSCAM-CSE-1
2.4 Traffic Light Detection (Semaphore + Tripwire Detection)
Create alarms when upto 8 tripwire lines are crossed when aspecified colour is shown in yourchosen
area. Below is an example of tripwires becoming active when the traffic lights turn to red (as this is
where the specified box is)
2.4.1 Traffic Light Detection Configuration
To setup Traffic Light on the camera, follow the steps below:
⚫Click on IVS tab on the left.
⚫Select Tripwire, Semaphore + Tripwire and click Submit button to save the changes.
⚫Click on Motion Detection tab on the left and Edit button on the bottom.
⚫Enable motion detection feature.
⚫Motion Detection Type to be selected Semaphore + Tripwire.
⚫Select Area to be selected Zoom.
⚫Use a mouse drag on the video.
⚫Drag a rectangle to where is semaphore on the video, and adjust the rectangle to fit the
actual size of semaphore.
⚫Change motion sensitivity according to the motion activities.
⚫Select one specific color and color ratio for detection.
⚫Click Submit button to save the changes.
766-UM-IVSCAM-CSE-1
2.5 Object Counting
Count the number of objects entering or exiting an area over a specific duration. A virtual area can
be drawn over a camera image with anything passing through the virtual area being logged and
counted. A record of how many times this area has been crossed is then accessible from the camera's
menu.
Note: For a crowd environment, people are right next to each other, the people counting engines
might treat as one people.
2.5.1 Object Counting Configuration
To setup Object Counting, follow the steps below:
⚫Click on IVS tab on the left.
⚫Select Object Counting and click Submit button to save the changes.
⚫Click on Object Counting tab on the left and Edit button on the bottom.
⚫Enable Object Counting feature.
⚫Select either Vertical or Horizontal crossing line.
⚫Use a mouse to drag the crossing line based on the video.
⚫Click the Direct Change button to define which direction is IN.
⚫Click Submit button to save the changes.
866-UM-IVSCAM-CSE-1
2.6 Unattended Object Detection (Object Left Detection)
Detect a left object. This can be used for detecting an unattended object or a parking violation. When
an object gets left, a red block gets showed.
2.6.1 Unattended Object Detection Configuration
To setup unattended object detection, follow the steps below:
⚫Click on IVS tab on the left.
⚫Select Object Left Detection and click Submit button to save the changes.
⚫Click on Object Left Detection tab on the left.
⚫Enable Object Left Detection feature.
⚫Use a mouse to drag a green detection box to where is monitored area on the video.
⚫Click Submit button to save the changes.
⚫Click on IVS Setting tab on the left.
⚫Select one Camera View according to what camera mounting. (Horizontally is for tabletop,
Angle and Overhead is for ceiling mount)
⚫Define Min. & Max. width and height for the detected object size.
⚫Click Submit button to save the changes.
966-UM-IVSCAM-CSE-1
Note:Relearn background could avoid false alarms. Strongly recommend to click the Submit button,
if the camera field of view gets changed.
2.7 Missing Object Detection (Object Remove Detection)
Detect a removed object. This can be used for monitoring an object missing in a museum or
finding a parking space.
2.7.1 Missing Object Detection Configuration
To setup Missing Object Detection on the camera, follow the steps below:
⚫Click on IVS tab on the left.
⚫Select Object Remove Detection and click Submit button to save the changes.
⚫Click on Object Remove Detection tab on the left.
⚫Enable Object Remove Detection feature.
⚫Use a mouse to drag a green detection box to where is monitored area on the video.
⚫Click Submit button to save the changes.
⚫Click on IVS Setting tab on the left.
⚫Select one Camera View according to what camera mounting. (Horizontally is for tabletop,
Angle and Overhead is for ceiling mount)
⚫Define Min. & Max. width and height for the detected object size.
⚫Click Submit button to save the changes.
10 66-UM-IVSCAM-CSE-1
Note: Relearn background could avoid false alarms. Strongly recommend to click the Submit button,
if the camera field of view gets changed.
2.8 Crowd Detection (Density Detection)
Detect number of moving people or objects exceeding a certain quantity, and fire warning
alarm. There are up to 32 objects that could be detected. This can be used for crowd
detection.
2.8.1 Crowd Detection Configuration
To setup crowd detection, follow the steps below:
⚫Click on IVS tab on the left.
⚫Select Density Detection and click Submit button to save the changes.
⚫Click Density Detection tab.
⚫Enable the setting.
⚫Select the number of the crowd. (Count: 3~32)
⚫Click Submit button for saving the changes.
This manual suits for next models
8
Table of contents
Other Lilin Security Camera manuals
Lilin
Lilin E1 Series User manual
Lilin
Lilin P2 Series User manual
Lilin
Lilin PIH-8176/8178 User manual
Lilin
Lilin CMR6186X3.6 N/P User manual
Lilin
Lilin CMG052X35 User manual
Lilin
Lilin iMEGAPRO IPD2220ES User manual
Lilin
Lilin PIH-2422 User manual
Lilin
Lilin IPC0122WP3 User manual
Lilin
Lilin PIH-802 User manual
Lilin
Lilin PIH-7635DH Series User manual
Lilin
Lilin PIH - 7625 User manual
Lilin
Lilin IPR722-IVS User manual
Lilin
Lilin ATR 700TVL User manual
Lilin
Lilin MR8322 User manual
Lilin
Lilin IPC0522 User manual
Lilin
Lilin 7000MPG4OOE User manual
Lilin
Lilin IPG1052ES User manual
Lilin
Lilin IPD312S4 User manual
Lilin
Lilin PIH 7000IP User manual
Lilin
Lilin SP9364 User manual
