Life Span VIPER User manual

NOTE: This manual may be subject to updates or changes. Up to date manuals are available through our website at www.lifespanfitness.com.au

Product may vary slightly from the item pictured due to model upgrades

Read all instructions carefully before using this product. Retain this owner’s manual

for future reference.

VIPER OWNER’S MANUAL

VIPER

TABLE OF CONTENTS

1. IMPORTANT SAFETY INSTRUCTIONS 3

2. IMPORTANT ELECTRICAL INFORMATION 4

3. IMPORTANT OPERATING INSTRUCTIONS 5

4. ASSEMBLY INSTRUCTIONS 6

5. FOLDING INSTRUCTIONS 11

6. OPERATION GUIDE 12

7. MAINTENANCE INSTRUCTIONS 27

8. EXPLODED DIAGRAM 35

10. PARTS LIST 36

11. TROUBLE SHOOTING GUIDE 38

12. WARRANTY 39

14. PROGRAM EXERCISE CHART 33

VIPER

1. IMPORTANT SAFETY INSTRUCTIONS

WARNING - Read all instructions before using this treadmill.

It is important your treadmill receives regular maintenance to prolong its useful life. Failing to

regularly maintain your treadmill may void your warranty.

Danger –To reduce the risk of electric shock disconnect your treadmill from the electrical outlet prior to

cleaning and/or service work.

DO NOT USE AN EXTENSION CORD: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY

USING IMPROPER ADAPTERS OR IN ANY WAY MODIFY THE CORD SET.

Install the treadmill on a flat level surface with access to a 220-240 volt (50/60Hz), grounded outlet.

Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and

treadmill may result.

Do not block the rear of the treadmill. Provide a minimum of 1 metre clearance between the rear of

the treadmill and any fixed object.

Place your unit on a solid, level surface when in use

When running, make sure the plastic clip is fastened on your clothing. It is for your safety, should

you fall or move too far back on the treadmill.

Keep hands away from all moving parts.

Never operate the treadmill if it has a damaged power cord or plug. When damaged, these must be

replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a

hazard.

Keep the cord away from heated surfaces.

Do not operate where aerosol spray products are being used or where oxygen is being

administered. Sparks from the motor may ignite a highly gaseous environment.

Never drop or insert any object into any openings.

VIPER

The treadmill is intended for in-home use only and not suitable for long term running.

To disconnect, turn all controls to the off position, remove the safety key, and then remove the plug

from the outlet.

The pulse sensors are not medical devices. Various factors, including the user’s movement, may

affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in

determining heart rate trends in general.

Use the handrails provided; they are for your safety.

Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your

treadmill. Quality athletic shoes are recommended to avoid leg fatigue.

Before undertaking any type of exercise program, it is recommended that you consult a doctor.

Injuries to health may result from incorrect or excessive training.

This appliance is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their safety.

WARNING heat rate monitoring systems may be inaccurate. If you feel faint stop exercising

immediately.

Children should not be allowed on or around the equipment, even when not in use.

Children should be supervised to ensure that they do not play with this machine

Loose-fitting clothing or jewellery that could become an entanglement hazard should not be worn.

Training shoes should be worn when using the equipment.

Equipment must be used on a level and stable surface.

All fixings should be checked before the equipment is used.

All literature relating to the use of the equipment should be retained for future reference.

Allowed operating temperature: 5-40°C

Remove the safety key after use to prevent unauthorized treadmill operation.

VIPER

2. IMPORTANT ELECTRICAL INFORMATION

WARNING!

Route the power cord away from any moving part of the treadmill including the elevation mechanism

and transport wheels.

NEVER remove any cover without first disconnecting AC power.

NEVER expose this treadmill to rain or moisture. This treadmill is not designed for use outdoors,

near a pool, or in any other high humidity environment.

This is high-power item; please do not share the same outlet with other high power machines such

as, fridges, air conditioning etc. Please choose an outlet exclusively for the machine and make sure

the fuse is 10A.

3. IMPORTANT OPERATING INSTRUCTIONS

Be sure to read the entire manual before operating your machine.

Understand that changes in speed and incline do not occur immediately. Set your desired speed on

the computer console and release the adjustment key. The computer will obey the command

gradually.

Use caution while participating in other activities while walking on your treadmill, such as watching

television, reading, etc. These distractions may cause you to lose balance or stray from walking in

the centre of the belt; which may result in serious injury.

In order to prevent losing balance and suffering unexpected injury, never mount or dismount the

treadmill while the belt is moving. This unit starts with at a very low speed. Simply standing on the

belt during slow acceleration is proper after you have learned to operate this machine.

Always hold on to handrail while making control changes.

A safety key is provided with this machine. Remove the safety key will stop the walking belt

immediately; the treadmill will shut off automatically. Inserting the safety key will reset the display.

VIPER

Do not use excessive pressure on console control keys. They are precision set to function properly

with little finger pressure.

Replace any defective components immediately. The machine must be kept out of use until fully

repaired

4. ASSEMBLY INSTRUCTIONS

PARTS LIST

NO.

Description

Specification

Qty

NO.

Description

Specification

Qty

Main frame

Bolt

M8*20

Allen Wrench

S=13\14\15mm

Bolt

M8*55

5#Allen Wrench

5mm

Lock washer

6#Allen Wrench

6mm

Screw

ST4.2*19

Left base cover

Screw

ST4.2*20

Right base cover

Standard Power Line

Safety key

100

Mp3 Wire

ASSEMBLY TOOLS:

VIPER

#5 Allen Wrench 5mm: 1pc

#6 Allen wrench 6mm: 1pc

Wrench w/screw Driver S=13, 14, 15: 1pcs

Notice: Do not get connect power until after assembly is completed.

STEP 1:

STEP 2:

1. Open the carton

2. Extract the parts listed above

3. Place the Main Frame onto level

ground

1. Erect the computer as shown in the

diagram. Using the 5# Allen wrench,

attach the Computer frame to the Left

and Right Upright securely with Bolt

M8*20(66) and Lock washer(82).

Note: Please do not damage the upright cover

and press the connect wire in upright when

pushing up

VIPER

STEP 3:

STEP 4:

1. Attach the Computer frame to the Left

and Right Upright tight using 5# Allen

wrench (13), Bolt M8*55(70) and Lock

washer(86).

2. Secure base frame (2) to upright (3)

using the 5# Allen wrench (13), Bolt

M8*20 (67) and Lock washer (86).

Reference the picture left.

3. Repeat above steps to assemble the

left side.

Note: Support the upright with your hand to avoid

it falling down and causing injury.

1. Attach the computer bracket on right

upright with the 5# Allen wrench (13),

M8*20 bolt (67) and lock washer (86).

2. Repeat above step to assemble the left

side.

VIPER

STEP 5:

STEP 6:

1. Attach the right upright cover to the

computer bracket with screw driver (12),

Bolt ST4.2*19 (75) and ST4.2*20 bolt

(88).

2. Attach the base cover (31) to the base

frame（2）using screw driver (12),

ST4.2*20 Bolt (88) and bolt (75).

3. Repeat above steps to assemble the left

side.

1. Connect the power cord (53) onto main

frame.

Table of contents

Other Life Span Treadmill manuals

Life Span

Life Span Pursuit 3 User manual

Life Span

Life Span TR3000i User manual

Life Span

Life Span Dymo User manual

Life Span

Life Span TR1000B User manual

Life Span

Life Span SPIRIT User manual

Life Span

Life Span TORQUE III User manual

Life Span

Life Span Dash User manual

Life Span

Life Span Bullet User manual

Life Span

Life Span Traction II User manual

Life Span

Life Span BOOMER PLUS User manual

Life Span

Life Span Echo User manual

Life Span

Life Span TR3000i Use and care manual

Life Span

Life Span TR5500iM User manual

Life Span

Life Span CORSAIR FREERUN 200 User manual

Life Span

Life Span TR650 Slim User manual

Life Span

Life Span Relay User manual

Life Span

Life Span TR2000e User manual

Life Span

Life Span LFTM-VFOLD User manual

Life Span

Life Span Equilizer XL User manual

Life Span

Life Span Workplace DT-3 User manual

Life Span

Life Span TR2500-HRC User manual

Life Span

Life Span TR1000-TV User manual

Life Span

Life Span Torque User manual

Life Span

Life Span SPRINTER XL User manual

Popular Treadmill manuals by other brands

Treadly

Treadly TREADLY 2 user manual

HEALTH ONE

HEALTH ONE Walk Ro user manual

NordicTrack

NordicTrack NTL12941 user manual

NordicTrack

NordicTrack T7.5 S user manual

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 user manual

Merax

Merax MS282992 manual

FYTTER

FYTTER RU-2SX manual

Precor

Precor 903 owner's manual

FitLogic

FitLogic freewill d225 owner's manual

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB instruction manual

Horizon Fitness

Horizon Fitness Adventure 5 Plus Service manual

Stamia

Stamia InMotion II owner's manual

Smooth Fitness

Smooth Fitness EVO 3i user manual

NordicTrack

NordicTrack NETL81810.0 user manual

Schwinn

Schwinn 830/Journey 8.0 Assembly manual / owner's manual

Keys Fitness

Keys Fitness HealthTrainer HT-740T owner's manual

Spirit

Spirit XT8 Service manual

NordicTrack

NordicTrack T 14.0 Treadmill Manuel de l'utilisateur