LevelOne FCS-1150 User manual

Zoom Network Camera

Hardware User Manual

FCS-1150, FCS-1160

Ver. 2014/05/27

Hardware Manual

Table of Contents

Precautions.......................................................................4

Safety Instructions...................................................................................................6

Introduction .....................................................................7

The List of Models ...................................................................................................7

Package Contents.....................................................................................................7

Physical Description ................................................................................................8

Before Installation .........................................................10

Connecting a PowerAdapter (Optional) .............................................................10

Connecting the DI/DO and Audio Devices (Optional)........................................12

How to Connect DI/DO Devices............................................................ 12

How to Connect Audio Devices............................................................. 15

Connecting a Serial Device (Optional).................................................................16

Indoor Installation Procedures.....................................18

Step 1: Mount the Indoor Bracket .......................................................................18

Step 2:Attach the Camera to the Bracket...........................................................19

Step 3: Connect the Cable(s).................................................................................21

Step 4:Access the Camera Live View ..................................................................22

OtherAccessories...........................................................23

How to Install / Remove the Memory Card.........................................................23

How to Insert the Memory Card ............................................................ 23

How to Remove the Memory Card........................................................ 23

Hardware Manual

Accessing the Camera....................................................24

Configure the IPAddresses...................................................................................24

Access the Camera.................................................................................................27

Hardware Manual

Precautions

Read these instructions

You should read all the safety and operating instructions before using this product.

Heed all warnings

You must adhere to all the warnings on the product and in the instruction manual. Failure to follow

the safety instruction given may directly endanger people, cause damage to the system or to

other equipment.

Servicing

Do not attempt to service this video device yourself as opening or removing covers may expose

you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Trademarks

All names used in this manual are probably registered trademarks of respective companies.

Liability

Every reasonable care has been taken during the writing of this manual. Please inform your local

office if you find any inaccuracies or omissions. We cannot be held responsible for any

typographical or technical errors and reserve the right to make changes to the product and

manuals without prior notice.

Hardware Manual

Federal Communications Commission Statement

This equipment has been tested and found to comply with the limits for a class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications to the equipment that are not expressly approved by the

responsible party for compliance could void the user’s authority to operate the equipment.

European Community Compliance Statement

This product has been tested and found to comply with the limits for Class B

Information Technology Equipment according to European Standard EN 55022

and EN 55024. In a domestic environment, this product may cause radio interference in which

cause the user may be required to take adequate measures.

Hardware Manual

Safety Instructions

Cleaning

Disconnect this video product from the power supply before cleaning.

Attachments

Do not use attachments not recommended by the video product manufacturer as they may cause

hazards.

Do not use accessories not recommended by the manufacturer

Only install this device in a dry place protected from weather

Servicing

Do not attempt to service this video product yourself. Refer all servicing to qualified service

personnel.

Damage Requiring service

Disconnect this video product from the power supply immediately and refer servicing to qualified

service personnel under the following conditions.

1) When the power-supply cord or plug is damaged

2) If liquid has been spilled, or objects have fallen into the video product.

3) If the inner parts of video product have been directly exposed to rain or water.

4) If the video product does not operate normally by following the operating Instructions in this

manual. Adjust only those controls that are covered by the instruction manual, as an improper

adjustment of other controls may result in damage, and will often require extensive work by a

qualified technician to restore the video product to its normal operation.

Safety Check

Upon completion of any service or repairs to this video product, ask the service technician to

perform safety checks to determine if the video product is in proper operating condition.

Hardware Manual

Introduction

The List of Models

This hardware manual contains the following models:

FCS-1160

Zoom Network Camera, 5-Megapixel, PoE 802.3af, Day & Night,

12x, WDR

FCS-1150

Zoom Network Camera, 3-Megapixel, PoE 802.3af, Day & Night,

12x, WDR

From the installation perspective, these models are very similar; therefore one manual is used for

all of them.

Package Contents

Camera

Terminal Block

(for Power)

Terminal Block

(for Audio and DI/DO)

Terminal Block

(for Serial Port)

Quick Installation Guide

Hardware Manual

Physical Description

1) Memory Card Slot

Insert a memory card into this slot for local recording purposes. See How to Install /

Remove the Memory Card on page 23 for more information.

NOTE: Supports microSDHC and microSDXC cards.

2) Digital Input / Output (DI/DO) and Audio Input / Output

This connector connects to digital input or output devices, such as an alarm trigger, panic

button, etc., as well as audio input and output devices, such as microphones and speakers.

Digital Input (DI) and Digital Output (DO) devices are used in applications like motion

detection, event triggering, alarm notifications, etc. See Connecting the DI/DO and Audio

Devices (Optional) on page 12 for more information.

3) DC 12V Power Input

In case the camera is connected to a non-PoE (Power over Ethernet) switch, use this

connector to connect an external adaptor (not included) to the camera. See Connecting a

Power Adapter (Optional) on page 10 for more information.

4) Reset Button

The purpose of reset button is to restore the factory default settings of the camera, including

administrator’s password.

The reset button can be used for following purposes:

1. The administrator’s password has been forgotten and therefore the camera cannot be

accessed.

2. In case of IP address, mask, or allow/deny filter related issues, resulting with inability to

modify these settings.

Hardware Manual

3. In case of connectivity issues or abnormal video quality.

How to do the reset?

Using a pointed object, such as a paper clip, press and hold the reset button for at least 5

seconds or until the Power LED goes off.

5) Power LED

The Power LED turns on when the camera is powered on and the system is running.

6) Ethernet Port

Connects to a network using a standard Ethernet cable.

7) Serial Port

This port connects to serial devices via RS-485 or RS-422 protocols. Use the supplied serial

port terminal block to connect the wires from the camera to the serial device.

See Connecting a Serial Device (Optional) on page 16 for connection details.

Hardware Manual

Before Installation

This section describes the procedures in preparing the external devices that you can connect to

the camera. The camera supports DC12V power input, Digital Input and Output (DI/DO), Audio

Input and Output devices, as well as Serial Devices like a Pan-Tilt (PT) Scanner using the

bundled terminal blocks. The use of these devices, however, is optional.

Connecting a PowerAdapter (Optional)

In case of using a non-PoE switch or your PoE switch has limited power supply, you can

purchase a power adapter and directly connect the camera to a power outlet. The power adapter

must be connected to the supplied terminal block before use.

To do this, follow the procedures below:

1. Loosen the screws of the 12V and GND pins of the power terminal block.

2. Take note that a standard power adapter cable has two (2) different wires:

White stripe: Connects to 12V Pin

Connects to GND Pin

This manual suits for next models

Table of contents

Other LevelOne Security Camera manuals

LevelOne

LevelOne FCS-3102 User manual

LevelOne

LevelOne FCS-1122 User manual

LevelOne

LevelOne FCS-3051 User manual

LevelOne

LevelOne FCS-1121 User manual

LevelOne

LevelOne FCS-4041 User manual

LevelOne

LevelOne FCS-3071 User manual

LevelOne

LevelOne FCS-3071 User manual

LevelOne

LevelOne FCS-3403 User manual

LevelOne

LevelOne FCS-1050 User manual

LevelOne

LevelOne FCS-0071 User manual

LevelOne

LevelOne FCS-1030 User manual

LevelOne

LevelOne WCS-1090 User manual

LevelOne

LevelOne CamCon FCS-1070 User manual

LevelOne

LevelOne FCS-3081 User manual

LevelOne

LevelOne FCS-0010 User manual

LevelOne

LevelOne FCS-3052 User manual

LevelOne

LevelOne WCS-2010 User manual

LevelOne

LevelOne FCS-5051 User manual

LevelOne

LevelOne GEMINI FCS-5212 User manual

LevelOne

LevelOne CamCon FCS-4020 User manual

LevelOne

LevelOne FCS-3053 Instructions for use

LevelOne

LevelOne CamCon FCS-4000 User manual

LevelOne

LevelOne FCS-5053 User manual

LevelOne

LevelOne CamCon FCS-1070 User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications